Sparks Electrical News June 2015

Animated publication

June 2015

FEATURES

• Tools of the trade • Energy measurement and supply

15-17 18-20

• Contractors’ corner • Buyers’ guide • Lighting • People on the move REGULARS

2-11, 14 12-13 21-23 24

www.crown.co.za

IN THIS ISSUE

'Select' club for electricians and contractors launched

Having fun at the Schneider Electric Club SElect launch are: Antony Junius, (channel manager); Nico van der Merwe (director, retail division); Belinda Aslett (channel manager, electricians, retail division); and John Raptakis (marketing manager, partner business, retail division). Club SElect is an exclusive programme for southern African registered electricians and

contractors, designed to drive benefits for its members by linking Schneider Electric’s business partners, communicating valuable opportunities, and sharing industry best practices, so as to drive a standard of excellence in the region. According to Eric Leger, country president for southern Africa at Schneider Electric, Club SElect members are given access to a tailor-made, private website that offers information on products, technology and solu- tions, as well as customised training, configurations and support. The portal also includes a partner locator to generate business opportunities. Club SElect aims to help electricians and contractors operate their businesses “more efficiently, profitably, professionally and personally”. Enquiries: +27 11 254 6400

Jeandré to represent SA at World Skills competition

JEANDRÉ van derWatt (22), a young electrical apprentice artisan fromVereeniging whoworks at Nampak Glass in Alberton, is brushing up on his skills in preparation for theWorldSkills competi- tion to be held in Brazil from 11 to 16 August 2015. He is being guided by his men- tor, Nick du Plessis at P&T Technology in Germiston. Jeandré won the‘Electrical Installations’category at the

Jeandré van der Watt.

SAWorld Skills competition that was held in January, beating eight other contestants in this category at the Cape Town International Convention Conference Centre. The South African finalists, representing 19 skills areas, will travel to Brazil on 7 August to compete against contestants from 72 member countries in 47 skills in traditional trades such as electrical, welding and plumbing as well as multi-skilled technology careers that include IT software solutions and graphic design. WorldSkills South Africa represents an opportunity to emphasise the key role that artisans play in the economy. The benefits for competition entrants are considerable and qualifying for the inter- national competition affords each participant a highly experienced mentor in his or her field. Participating in the international competition is equivalent to four or five years of professional training with all the benefits of that experience: confidence and character building andmany network- ing opportunities. Apprentice artisans who are interested in taking part in the 2016 SA Skills competition can find out more about the competition on theWorldSkills SA website: www.worldskillssa.org.za

Engage win 2

WIN 1 of 8 tickets to the UK in spring CHANCE TO ENTER FOR THE

MAKE THE PLAY

GO INSTORE

MAKE A PURCHASE

Make any purchase during 01 st June - 31 st July 2015 and YOU will qualify and be entered into our GRAND PRIZE DRAW.

keep a Look out for

product specials instore grand slam

WIN WEEKLY great <

PRIZES

YOUR“NAME”& “BRANCH”TO 44097 SMS to ENTER

OTHER easy ways

MOBILE APP

FACEBOOK

ONLINE WWW.VOLTEX.CO.ZA

*All images and products are for illustrative purposes only

www.voltex.co.za info@voltex.co.za

T&C’s apply

Ask our staff for more details.

contractors’ corner 3

If your dreams don’t scare you, they’re not big enough

AB: I would say that today there is a far better understanding of lightning and the need for lightning protection, and people aremore aware of workingwithin the correct standards.This heightened consciousness has also led to supe- rior lightning protection products and solutions beingmanufactured. Sparks: What major projects have youworked on andwhat is your greatest accomplishment? AB: Amajor project that I worked onwas the design, construction and commissioning of the Johannesburg Stock Exchange’sTier 3 data centre.This particular installation, completed in 2011, was the first of its kind and took the stock exchange to the next level in data centres. It was particularly significant for me as it was an opportunity to build a start-to-end solution, which incorporated the design, management and support of this project. Sparks: Have youwon any awards? AB: Yes. I was proud to be awarded the EMEA Order of Merit, 2011 to 2013 fromSchneider Electric. Sparks: Who has been your inspiration or have you had amentor who has influenced your career? AB: Jonathan Duncan, the director of the information technology business for central, north and east Africa at Schneider Electric, has been the greatest influence onmy career. Hewas an incredible boss who gaveme the greatest amount of respect and understanding – and he had faith inme. This is something I’ll always remember and hope to replicate with other young people within the industry. I’ll never forget that he once toldme that one day I would be his boss! Sparks: What, to your mind, are the biggest chal- lenges facing the industry at this time? AB: Strikes and load shedding are challenges that are affecting the electrical industry as well as the fluctuating commodities pricing, which all directly affect business in this sector. Sparks: What do you enjoymost about your job? AB: I really have a passion for thismarket and I love to sharemy knowledge. It’s so gratifying to meet others who are interested in learning. In fact, we had a recent seminar in Nigeriawhere

like to be able to be instrumental in saving lives in Africa by ensuring that death or injury caused by lightning becomes a thing of the past. DEHNAfrica has already put thismovement in motion by joining forces with the African Centres for Lightning and Electromagnetics (ACLE) to protect African schools and students specifically from lightning strikes and the resultant injuries.

the roomwas so packed that some attendees who couldn’t be accommodated inside had to listen to the presentations fromoutside through thewindows! Workingwith the teamwe have in Africa is fantastic; and the teamspirit is almost tangible. Sparks: Howdo youmotivate your staff? AB: I believe in leading by example and being appreciative of the roles played

by each person onmy team. Sparks: If you could‘do it all again’, would you change any- thing? If so, what would that be? AB: I feel that I’vemade the right decisions at the right time, as if my destiny was planned upfront – and I’mexactly where I want to be. Sparks: Would you advise a per- son leaving school to enter the electrical industry? Andwhy? AB: Yes, absolutely.Trends show that the electrical sector is the backbone of all industries so it holds far less risk that other sec- tors.Therewill always be growth and opportunities in the electri- cal industry. Sparks: What is your advice to electrical contractors and/or electrical engineers? AB: I would advise contractors to be fair, honourable and honest advisors, and to keep up-to-date on the industry standards. Sparks: What is your favourite quote? AB: “If your dreams don’t scare you, they’re not big enough.” Sparks: Name three things on your‘bucket list’(things you want to do before you‘kick the bucket’). AB: I would love to visit Rome, see theVatican and immersemy- self in the history of the city.Then I would like to be in a position to give away 50%of my wealth when I turn 50; and lastly, I would

Alexis Barwise.

ALEXIS Barwise, the young and dynamicmanag- ing director at DEHNAfrica for the past two years, is a relative newcomer to the electrical industry. In the eight years since he earned his degree in electrical and electronic engineering, his keen interest in lightning and surge protection has grown into a passion. Although he has rapidly risen to the position of managing director of an international company, he remainsmodest. A dedicated teamplayer who has a vision for the company, he delights in sharing his knowledgewhilemotivating and inspiring his staff. Sparks: Wherewere you educated? AB: I matriculated fromKlerksdorpHigh School and thenwent to North-West University from 2003 to 2007, where I obtained a B Eng (electrical and electronic) degree. Sparks: How long have you been involved in the electrical industry? AB: I’ve been in this industry for almost eight years. Sparks: When andwhere did you start your career? AB: In 2007, I startedwithWise Design in Pretoria as an electrical design engineer in charge of the electrical team. Sparks: What are the greatest changes you have seen over the years?

Obituary Well-known training officer mourned

BONGANI Sydwell Gumbi , a well- respected training officer at P & T Technology in Ger- miston, passed away suddenly on 1 April. Known as a man with a ‘big heart’who always gave willingly, Sydwell was regarded as a dedicated trainer who had the inborn ability to inspire the students in his care to study and work hard so that they could become excellent electricians. Before joining P&T Technology seven years ago, Sydwell worked at the Electrical Contractors’Association of South Africa and was already well-established in the field of electrical training. Many qualified electricians who passed through his capable hands will remember how his flair for motivating his students

achieved excellent results. Sydwell was admired and respected by his colleagues not only for his skill as a trainer but also for his work ethic, his strength of character and his willingness to help. “Sydwell will be deeply missed and his passing leaves a void in our company and the training industry,”says Nick du Plessis, managing director at P&T Technology, adding that everyone at P&T Technology offers sincere condolences to his family and friends. Du Plessis says Sydwell epitomised the quote fromAlbert Einstein:“The value of a man should be seen in what he gives and not in what he is able to receive.”

ABB SACE legacy switchgear; can operational life be extended?

Many SACE air circuit-breakers have been installed in South Africa since their introduction in the early 1980’s. Durable construction and superior design keeps them functioning, however service is required to keep them functioning optimally. For additional information: www.abb.co.za/lowvoltage/service ABB South Africa (Pty) Ltd Tel. +27 10 202 5880 E-mail: LP@za.abb.com

Certainly.

june 2015

sparks 4/22/2015 9:43:38 AM ELECTRICAL NEWS

Legacy Switchgear Sparks Electrical News Strip.indd 1

4 contractors’ corner

Working knowledge by Terry McKenzie-Hoy Three things electricians of the future should know about

wonder why on earth anybody would want to run a house on a battery that has to be charged any- way. The point is that it could be charged when the system load is low, which will be of benefit to power systemoperators. So, if you are to be the electrician of the future, you are going to have to know something about inverters and battery chargers and batteries. Fuel cells I have written about fuel cells before andmany readers will remember that if you take a battery and connect it to two electrodes – positive and negative – and put the electrodes in water, then hydrogen will come off one electrode and oxygen off the other. In a similar way, a fuel cell draws in oxygen from the air and hydrogen from a cylinder and produces water and electricity. Thus, a fuel source of the future could be a fuel cell supplying houses or small towns. The problem is that the fuel cell requires hydrogen – and quite a bit of it: at 5 kW a fuel cell uses 65 litres of hydrogen a minute. To generate the hydrogen by conventional means as described above (that it, by electrolysis) really means that all one is doing is operating a system that is inherently inefficient. An alternative, however, is to consider that hydrogen can be produced by the process of catalytic cracking (as done in the oil refinery) and could become available. So, perhaps electricians of the future will have to know something about fuel cells as well. LEDs Another technology that is advancing so rapidly that even experts in the field are being taken by surprise is that of illumination using light emitting diodes (LEDs). These diodes are getting ever brighter andmore efficient. Shortly, there are going to be whole panels of LED lights that consume very little electricity. The electrician of the future should know about this technology because it’s growing quickly and the implications are astonishing: Imagine if you could light up a whole building of five stories using nomore than 1 kWof elec- tricity. This may sound ridiculous but I don’t believe it’s impossible. Let’s wait and see. Detecting leaks quickly and safely

batteries are lithium ion batteries. These have an energy density of about 200Whours per kilogram. Thus, put simply, a 1 kg battery could produce 40 A at 5 V for one hour. Thus, a 50 kg battery can produce about 10 kW for one hour. This is very much better than a lead acid battery. However, since no battery is fully efficient, it takes more than 200Wper kilogram to charge the battery. Nevertheless, one can see that if we make a 20 kWhours battery then we have the potential to supply power to a small house. Natu- rally the battery will have to drive an inverter. Not only this, there will also have to be some charging arrangement for the battery. One may

the Tesla Powerwall home battery works, it is also quite likely that we will never know because Tesla isn’t about to tell us. So, in this month’s column I thought I would ex- plain – in simple terms – some technologies that are improving, the first of which is batteries. Batteries The first battery, called‘the Voltaic pile’was invented in 1799 by Italian physicist and chemist, AlessandroVolta (1745 – 1827). The battery consisted of alternating layers of copper and zinc immersed in a jar full of sulphuric acid. Batteries based on this principle are still used today since they are rugged and reliable. The latest‘all smart’

IT’S a strange thing when you are in the electrical business…For some reason you are expected to be an expert on everything electrical. If the washingmachine breaks, you are supposed to fix it. Come Christmas time if the Christmas tree lights don’t work, you’re supposed to fix them (although I must admit that when I am asked to fix Christmas tree lights, I say that I amCatholic and I don’t work on Christmas day). There are other things we’re meant to know. For example, when a new battery is invented by Elon Musk’s company, Tesla, we are supposed to know how it works. People don’t seem to realise that, apart from the fact we probably don’t how

WHEN leaks occur, they often generate an ultrasonic frequency that is beyond human hearing. Amprobe’s TMULD-300 converts these sounds into an audible range for easy detection. The TMULD-300 tests pressurised air lines, refrig- eration systems and steam lines for leaks. The TMULD-300 includes an ultrasonic transmitter that is specifically designed for use in areas where leaking gases are not sufficiently pressurised. TMULD-300 features: • The UT-300 transmits an ultrasonic signal for non-pressurised applications. • Tests the ‘air-tightness’ of weather seals, tanks, ovens, refrigerators, etc. • Locates leaks in duct work. • Finds the ends of buried PVC pipes. • Detects any pressurised gas leak regardless of type: CFCs, HFCs, nitrogen, etc (unaffected by con- taminants). Enquiries: +27 11 608 8541

june 2015

sparks

ELECTRICAL NEWS

6 contractors’ corner

Lightning and surge protection for rooftop photovoltaic (PV) systems

ACCORDING to the South African Photovoltaic In- dustry Association (SAPVIA), PV is the fastest grow- ing power generation technology in the world. Between 2006 and 2009 the installed capacity globally grew on average by 60% p a. Today, more than 35 GWof PVs have been installed and are operating worldwide, producingmore than 30 TWh of clean energy per year. Bearing inmind that self-generated electricity is generally cheaper and provides a high degree of electrical independence from the grid, PV systems will become an integral part of electrical installations in the future. However, these systems are exposed to all weather conditions andmust withstand themover decades. The cables of PV systems frequently enter the building in question and extend over long distances until they reach the grid connection point. Lightning discharges cause field-based and conducted electrical interference. This effect increases in relation to increasing cable lengths or conductor loops. Surges do not only damage the PVmodules, inverters and their monitoring electronics, but also devices in the building instal- lation. More importantly, production facilities of industrial buildings may also be damaged and halt production. If surges are 'injected' into systems that are far from the power grid – which are also referred to as stand-alone PV systems – the operation of equipment powered by solar electricity, such as medical equipment, water supply, and so on, may be disrupted. Necessity of a rooftop lightning protection system The energy released by a lightning discharge is one of the most frequent causes of fire. Therefore, personal and fire protection is of paramount importance in case of a direct lightning strike to a building.The installation of PVmodules does increase the risk of lightning strikes as the col- lection area increases and substantial lightning interference may be injected into the building through these systems. Therefore, it is necessary to determine the risk resulting from a lightning strike as per IEC 62305-2 (SANS 62305-2) and to take the results from this risk analysis into account when installing the PV system. For this purpose, DEHN, for example, offers a service through its consulting division, DEHNconcept, which can conduct the risk analysis and design a lightning protection system (LPS) for the site. These standards require that a lightning protection system according to class of LPS III be installed for rooftop PV systems (> 10 kWp) and that surge protectionmeasures are taken. As a general rule, rooftop PV systems must not interfere with the existing lightning protection measures. Necessity of surge protection for PV systems In case of a lightning discharge, surges are induced on electrical conductors. Surge protective devices (SPDs), whichmust be installed upstreamof the devices to be protected on the alternating current (ac), direct current (dc) and data side, have proven effective in safeguarding electrical systems from these destructive voltage peaks. Section 9.1 of the CLC/TS 50539-12 standard (Selection and applica- tion principles – SPDs connected to photovoltaic installations) calls for the installation of surge pro- tective devices unless a risk analysis demonstrates that SPDs are not required. According to IEC 60364-4-44, surge protective devices must also be installed for buildings with- out external lightning protection systems such as commercial and industrial buildings. Cable routing of PV systems Cables must be routed in such a way that large conductor loops are avoided. This must be ob- served when combining the dc circuits to form a string and when interconnecting several strings. Moreover, data or sensor lines must not be routed over several strings and form large conductor loops with the string lines. This must also be ob- served when connecting the inverter to the grid connection. For this reason, the power (dc and ac) and data lines must be routed together with the equipotential bonding conductors along their entire route. Earthing of PV systems PVmodules are typically fixed onmetal mounting systems. The live PV components on the dc side feature double or reinforced insulation (compara- ble to the previous protective

A building with external protection system and sufficient separation distance.

The distance between the module and the air termination rod required to prevent shadows.

system and the lightning protection system. In this context, core shadows must be prevented by, for example, maintaining a sufficient distance between the air-termination rods and the PV module. Lightning equipotential bonding is an integral part of a lightning protection system. It must be implemented for all conductive systems and lines entering the building whichmay carry lightning currents. This is achieved by directly connecting all metal systems and indirectly connecting all energised systems via Type 1 lightning current ar- resters to the earth-termination system. Lightning equipotential bonding should be implemented as close as possible to the entrance point into the building to prevent partial lightning currents from entering the building. The grid connection point must be protected by a multi-pole spark-gap-basedType 1 SPD. If the cable lengths between the arrester and inverter are less than 10 m, sufficient protection is pro- vided. In case of greater cable lengths, additional Type 2 surge protective devices must be installed upstreamof the ac input of the inverters. Every dc input of the inverter must be protected by a Type 2 PV arrester. This also applies to trans- formerless devices. If the inverters are connected to data lines, for example tomonitor the yield, surge protective devices must be installed to protect data transmission. Another possibility tomaintain the separation distance is to use high-voltage-resistant, insulated HVI conductors, whichmaintain a separation distance up to 0.9 m in the air. HVI conductors may directly contact the PV systemdownstreamof the sealing end range. Application example 3: Buildingwith external lightning protection systemwith insufficient protection distance If the roofing is made of metal or is formed by the PV system itself, the separation distances cannot be maintained. The metal components of the PVmounting systemmust be connected to the external lightning protection system in such a way that they can carry lightning currents (copper conductor with a cross-section of at least 16 mm 2 or equivalent). This means that lightning equipo- tential bondingmust also be implemented for the PV lines entering the building from the outside. Lightning equipotential bondingmust also be implemented in the low-voltage infeed. If the PV inverter(s) is (are) situatedmore than tenmetres from theType 1 SPD installed at the grid con- nection point, an additionalType 1 SPDmust be installed on the ac side of the inverter(s). Suitable surge protective devicesmust also be installed to protect the relevant data lines for yieldmonitoring. PV systems withmicro-inverters Micro-inverters require a different surge protec- tion concept. To this end, the dc line of a module or a pair of modules is directly connected to the small-sized inverter. In this process, unnecessary conductor loops must be avoided. Inductive cou- pling into such small dc structures typically only has a low energetic destruction potential. The extensive cabling of a PV systemwith micro-inverters is located on the ac side. If the micro-inverters are directly fitted at the module, surge protective devices may only be installed on the ac side. Conclusion Solar power generation systems are an integral part of today’s electrical systems. They should be equipped with adequate lightning current and surge arresters, thus ensuring the long-term fault- less operation of these sources of electricity.

conventional dc sources: They have a non-linear characteristic and cause long-termpersistence of ignited arcs. This unique nature of PV current sources does not only require larger PV switches and PV fuses, but also a disconnector for the surge protective device, which is adapted to this unique nature and capable of coping with PV currents. Selection of SPDs according to the voltage protection level Up The operating voltage on the dc side of PV systems differs from system to system. At present, values up to 1 500 V dc are possible. Consequently, the dielectric strength of terminal equipment also differs. To ensure that the PV system is reliably protected, the voltage protection level up of the SPDmust be lower than the dielectric strength of the PV system it is supposed to protect. The CLC/TS 50539-12 standard requires that Up is at least 20% lower than the dielectric strength of the PV system. Type 1 or Type 2 SPDs must be energy-coordinated with the input of terminal equipment. If SPDs are already integrated in terminal equip- ment, coordination between the Type 2 SPD and the input circuit of terminal equipment is ensured by the manufacturer. Application example 1: Buildingwithout external lightning protection system In a building without external lightning protection system, dangerous surges enter the PV systemdue to inductive coupling resulting fromnearby light- ning strikes or travel from the power supply system through the service entrance to the consumer’s installation. Type 2 SPDs are to be installed at the following locations: • Dc-side of the modules and inverters; • Ac output of the inverter; • Main low-voltage distribution board; and • Wired communication interfaces. Every dc input (MPP) of the inverter must be protected by a Type 2 surge protective device. European standards require that an additional Type 2 dc arrester be installed on the module side if the distance between the inverter input and the PV generator exceeds 10 m. The ac output of the inverters are sufficiently protected if the distance between the PV inverters and the place of installation of the Type 2 arrester at the grid connection point (low-voltage infeed) is less than 10 m. In case of greater cable lengths, an additional Type 2 surge protective device must be installed upstreamof the ac input of the inverter. Moreover, a Type 2 surge protective device must be installed downstreamof the meter of the low- voltage infeed. If inverters are connected to data and sensor lines tomonitor the yield, suitable surge protective devices are required. Application example 2: Buildingwith external lightning protection systemand sufficient separation distances In this case, the primary protection goal is to avoid damage to persons and property (building fire) resulting from a lightning strike. Here it is impor- tant that the PV systemdoes not interfere with the external lightning protection system. Moreo- ver, the PV system itself must be protected from direct lightning strikes. This means that it must be installed in the protected volume of the exter- nal lightning protection system. This protected volume is formed by air-termination systems, such as air-termination rods, which prevent direct lightning strikes to the PVmodules and cables. The protective angle method or rolling sphere method may be used to determine this protected volume. A certain separation distance must be main- tained between all conductive parts of the PV

insulation) as required in IEC 60364-4-41. The combination of numerous technologies on the module and inverter side, with or without galvanic isolation, results in different earthing require- ments. Moreover, the insulationmonitoring sys- tem integrated in the inverters is only permanent- ly effective if the mounting system is connected to earth. The metal substructure is functionally earthed if the PV system is located in the protect- ed volume of the air termination systems and the separation distance is maintained. International guidelines require copper con- ductors, with a cross-section of at least 6 mm 2 or equivalent, be used for functional earthing. The mounting rails also have to be permanently interconnected by means of conductors of this cross-section. If the mounting system is directly connected to the external lightning protec- tion system, due to the fact that the separation distance cannot be maintained, these conductors become part of the lightning equipotential bond- ing system. Consequently, these elements must be capable of carrying lightning currents. The minimum requirement for a lightning protection systemdesigned for class of LPS III is a copper conductor with a cross-section of 16 mm 2 or equivalent. Also in this case, the mounting rails must be permanently interconnected by means of conductors of this cross-section. The functional earthing / lightning equipotential bonding con- ductor should be routed in parallel and as close as possible to the dc and ac cables / lines. UNI earthing clamps can be fixed on all com- monmounting systems. They connect, for exam- ple, copper conductors with a cross-section of six or 16 mm 2 and bare round wires with a diameter from eight to 10 mm, to the mounting frame in such a way that they can carry lightning currents. The integrated stainless steel (V4A) contact plate ensures corrosion protection for the aluminium mounting systems. Separation distances as per IEC 62305-3 (EN 62305-3) A certain separation distance must be maintained between a lightning protection system and a PV system. It defines the distance required to avoid uncontrolled flashover to adjacent metal parts resulting from a lightning strike to the external lightning protection system. In the worst case, such an uncontrolled flashover can set a PV plant on fire. The calculation of the separation distance can be easily and quickly calculated by an analysis package, such as the DEHNconcept, for example. Core shadows on solar cells The distance between the solar generator and the external lightning protection system is absolutely essential to prevent excessive shading. Diffuse shadows cast by, for example, overhead lines, do not significantly affect the PV system and the yield. However, in case of core shadows, a dark clearly outlined shadow is cast on the surface behind an object, changing the current flowing through the PVmodule. For this reason, solar cells and the associated bypass diodes must not be influenced by core shadows. This can be achieved by maintaining a sufficient distance. For example, if an air-termination rod with a diameter of 10 mm shades a module, the core shadow is steadily re- duced as the distance from the module increases. After 1.08 monly a diffuse shadow is cast on the module. Special surge protective devices (SPD) for the dc side of photovoltaic systems The U/I characteristics of photovoltaic current sources are very different from that of

june 2015

sparks

ELECTRICAL NEWS

contractors’ corner 7

Mark Palmer, Western Cape Electrical Inspection Authority (WCAEIA)

The legal requirements of ‘properly used’ in CoCs (Part 1)

compliance is justified, do not however appear in the definitions contained either in the Act or in the Regulations. The Act, however, only deals with two aspects in this context: 'reasonably practicable' and 'safe'. Next month, I intend to clarify these two aspects in line with the 'properly used' issue discussed in this column with specific reference to the issuing of valid Certificates of Compliance. To conclude, I’d like to leave Registered Persons with a thought on which to ponder: 'Is reasonably safe the same as being reasonable dead?'

Persons and electrical contractors. Sub section 2

of safety legislation. Many of the cases of non- compliance, which I deal with on a daily basis, include these contraventions and when they are exposed, affected registered persons tend to look for justification for the non-compliant electrical work. This ‘justification’is an attempt to disregard the entire scope of the intention of legislation by only looking at the two words contained in the very same declaration I started with, which are 'reasonably safe'. These two words in the context of which non-

THIS month I’d like to tackle an area of certification that seems to be misunderstood by the electrical industry as a whole – that of electrical equipment being ‘properly used’. This already confusing scenario is aggravat- ed when Registered Persons cover up non- compliant installation work by deliberately using other interpretations on the standards that are, in fact, just watered down advice from sources that may not fully comprehend or understand the legal requirements. The term 'properly used' is raised in An- nexure 1 of the Certificate of Compliance document. Now, in my opinion, because the words 'properly used' form part of a statement and are not an actual statement, these words are frequently not read in the context in which they must be legally applied. I would like, therefore, to look at the legal implications of this in more detail: “I (Registered Person name) (ID Number), a Registered Person, declare that I have person- ally carried out the inspection and testing of the electrical installation described in the test report as per the requirements of (nature of electrical installation), and deem the electri- cal installation to be reasonable safe when properly used.” To fully comprehend the meaning of 'properly used', one has to consult the Occupational Health and Safety Act 85 of 1993 where the definition of 'properly used' is contained. 'Properly used' means used with reason- able care, and with due regard to any infor- mation, instruction or advice supplied by the designer, manufacturer, importer, seller or supplier . In comprehending the intention of the legislator here, it has to be understood that there is, in fact, a dual responsibility created. Firstly, the user of an electrical installation (as more specifically detailed in the Electrical Installation Regulations 2009) has to use something with ‘reasonable care’. This responsibility is coupled with the responsibility of the provider of the article or substance who has to provide informa- tion and instructions in order to enable the user thereof to use it properly. In all instances it must be clearly under- stood that any component used within a low voltage electrical installation must comply with a standard, which is referred to in the incorporated standard SANS 10142-1: EIR 5(2) – “No personmay use components within an electrical installation unless those components comply with the standards referred to in the relevant incorporated standard…” Furthermore, in terms of these standards to which components must comply, the manufacturer of the component is legally obligated to ensure that instructions are available concerning the safe installation and use of the component. Many of these instructions are, in fact, incorporated in the standard to which the component complies. Again, I must highlight the requirements of the Act; Section 10 – General duties of manu- facturers and others regarding arti- cles and substances for use at work Sub section 1 “Any person who designs, manufactures, imports, sells or supplies any article for use at work shall ensure, as far as is reasonably practicable, that the article is safe and with- out risks to health when properly used and that it complies with all prescribed require- ments .” Here it is important to note that this section of the Act goes even further and extends this responsibility not only to the manufacturer but also to 'others'. These 'others' to which the Act refers (and certainly in the scope of low voltage electrical installations) include Registered

“Any person who erects or installs any article for use at work on or in any premises shall ensure, as far as is reasonably practicable, that noth- ing about themanner in which it is erected or installedmakes it unsafe or creates a risk to health when properly used”. And this is where my dilemma lies. Where components are not correctly installed (including distribution boards, cables, enclosures, disconnectors, etc.) there is a clear contravention

25 Years of Quality Products. 25 Years of Satis ed Customers.

C

M

Y

CM

MY

CY

CMY

K

june 2015

sparks

ELECTRICAL NEWS

A decision based on cost COULD BE COSTLY!

R400 + Medical bills.

R1000

Purchasing the correct instrument for the application is vitally important. Indiscriminate selection based on price alone is a safety risk and could prove much more costly. Even fatal. Instruments should bemanufactured to IEC standards to ensure safe operation. These are categorized as CAT I to CAT IV. The higher category corresponds to electrical environments with greater transient energy and is also required for humid environments. Consider the application and look carefully at the instrument’s specifications before making a purchasing decision.

+ Safety and peace of mind.

This communication is published by the SAFEhouse Association in the interests of the safety of electrical contractors.

Be Safe. Always ask for and use SAFEhouse members’ products and services:

TM

PRETORIA MOTOR CONTROL GEAR PRODUCTS PMCG

Suppliers you can trust

Become a SAFEhouse member today.

The South African Safehouse Association is an independent, registered, non-profit organization established by the electrical industry and committed to communicating with customers. The South African Safehouse Association has been established to combat this proliferation of dangerous products and services by: • Making the market aware of the risks in using such products and services • Exposing sub-standard products and services • Persuading specifiers, suppliers and distribution channels not to recommend or to offer such products and services for sale For more information contact : Pierre Nothard Cell: 083 414 4980 | Tel: 011 396 8140 Email: pierren@safehousesa.co.za

AMEMBEROFTHE Hudaco GROUP

TVE LECTRIC

www.safehousesa.co.za

As at 08/05/2015

june 2015

sparks

ELECTRICAL NEWS

contractors’ corner 9

Let's all be safe – take a stand against unsafe products and our strategy known to the NRCS, the South African Bureau of Standards (SABS) and the Department of Trade and Industry (dti) and we have, as a matter of course, submitted formal reports about the cases we have investigated to the NRCS. This did not lead to anything in the way of co-operative activities but we have recently taken the initiative to develop such co-operation. Sparks: What are the major challenges SAFEhouse faces?

UNSAFE electrical products are potentially lethal – whether it’s a dodgy extension cord or a counterfeit earth leakage device. The good news is that electrical contractors can now put their combined force behind the SAFEhouse Association to help rid this country of these dangerous products. Sparks talks to Pierre Nothard, chairman of the SAFEhouse Association, about its objectives and achievements over the past two-and-a- half years and, importantly, what the readers of Sparks Electrical News can do to make South Africa a safer place, electrically speaking… Sparks: What is SAFEhouse? PN: SAFEhouse is a non-profit industry associa- tion established to address the prevalence of sub-standard electrical products and services in South Africa. Sparks: What are the objectives of SAFEhouse? PN: The key objectives of SAFEhouse are to inform the market, in its broadest possible definition, of the prevalence of sub-standard products and services; to alert users to the risks associated with such products and services; and to persuade the distribution channels not to deal in such products and services. Recently, SAFEhouse has also been tasked by its members to engage with the NRCS (National Regulator for Compulsory Specifications) with a view to initiating co-operative action to deal with this issue and with some other aspects re- lated to the implementation of the regulations. Sparks: To what extent have you achieved your objectives? PN: Our market communications have been consistent and, we think, informative. We do not yet have the financial capability for widespread consumer-type communications, but we have been able to create increasing awareness in the industry amongst those who distribute and install electrical products. Financial resources are, of course, necessary for whatever we take on and, in this regard, we have been pleased with the growth of member- ship as this places us in a position to concentrate more on dealing with specific issues of non- compliance. This intensified concentration has come about this year and has produced some good results in alerting resellers to risky products and getting sub-standard products returned to suppliers. We have also just commenced a process of engagement with the NRCS and there are promising developments in this regard. To summarise: SAFEhouse has made good progress so far but there is still much work to be done. Sparks: What resources are available to SAFEhouse to address the primary issues? PN: Philosphically, our major strength is our de- termination to uncover the truth and courage to advertise it. Physically, some would say we are under-resourced relative to the enormous size of the task, but we are very conscious of the fruitless existence of industry associations for their own sake and wish to avoid being a bureaucratic cost-centre and little else. We have, therefore, deliberately been careful about a premature commitment to resources. We make extensive use of members’consid- erable skills, knowledge, facilities and other resources to keep costs down and we have employed experts as needed case-by-case Sparks: What about membership? PN: So far we have focused a lot on growing the membership base so as to acquire the financial capability to do the job. With 34 members we are now in a position to concentrate more on identifying and dealing with specific instances of non-compliance. Step-by-step, we will acquire what is needed to continue progressing towards a comprehensive andmore powerful capability. Sparks: Can you clarify the involvement of the NRCS and initiatives with any other authorities? PN: From the beginning, we made our presence

PN: There are three major challenges: First, the apathy of our industry. We are good at complaining, but not so good at imagining what can be done and worse at committing to action. For example: The lighting sector is riddled with sub-standard products but we have few specialist members from that sector and we get very few lighting cases reported to us. Secondly, many of the cases reported to us do not have enough information to enable us to act on them. SAFEhouse is increasingly tak- ing the initiative to itself patrol for sub-standard products and services. Thirdly, sufficient funding is always an issue; as we all know, there is never enough money. SAFEhouse is funded by its members and getting entities to participate in the current economic environment is not easy. The drive for membership remains a priority. Sparks: Discuss the successes and failures, if any, of SAFEhouse. PN: My biggest disappointment is our failure to attract more of the retail sector to support the SAFEhouse initiative. That channel clearly has a huge influence on which products are avail- able to the residential market in particular. It is regrettable, perhaps telling, that the attitude is often:“What’s in it for us?” Successes? The growth in membership has been pleasing. During the past fewmonths, we have had three cases of non-compliant prod- ucts being voluntarily removed from shelves by retailers after we had alerted them. We also sense an increasing awareness of the SAFE- house initiative and, more importantly, of the issues we deal with. It is now becoming easier to get the attention of senior people who are able to take quick, decisive actions about the products contained within their offerings. Sparks: Does SAFEhouse have any current cases pending, howmany and what is the nature of these cases? PN: We currently have nine cases on the go. The issues are typically around the use of sub- standard components, for instance cable that uses sub-standard conductor-material, and also dimensional and other such aspects that under- mine safe electrical connection in products. Sparks: It is said that some of your members themselves deal in sub-standard products … PN: It is significant that four of the current cases involve members lodging complaints about another member’s products. We encourage this and deal with every case as we would if it were otherwise. Of course SAFEhouse members, having committed to the code of conduct, are immediately receptive and co-operative. Sparks: What are the future plans and focus areas of the association? PN: SAFEhouse will continue the drive for membership; we will concentrate more on pur- suing and exposing cases of non-compliance; and we will develop and implement co-opera- tive actions with the NRCS. Sparks: How can electrical contractors assist SAFEhouse? PN: The readers of Sparks Electrical News can help themselves and, in the process, SAFE- house, in a number of ways: First, they should be aware of – and opposed to – the prevalence of sub-standard products and installations; actively be on the look-out for these and report them to SAFEhouse with the following information:

can contact us with information and we will investigate and expose installations that are significantly sub-standard and which present a safety risk to users. Of course non-ECA(SA) members can also contact us. We cannot react to relatively minor instances. It depends on the size and consequence of the matter to the user

In the case of sub-standard products: • The reason for suspecting sub-standard sta- tus (not just ‘a shot in the dark’). • Product identification (a photograph is ideal). • The identity of the seller and/or installer. • The location of the seller/installer – an address is certainly helpful. • Their own contact details – at least a telephone number or an email address. In the case of a sub-standard installation, we need the following information: • The reasons for suspecting the sub-standard status. • The address of the installation. • A photo of the problem area if possible. SAFEhouse can send a photographer if the installation is accessible and sufficiently illus- trative. • The identity of the installer, if possible – or at least a ‘lead’. • The contact details of the end-user (at least a telephone number or email address). • Their own contact details I should emphasise that we do not reveal the identity of the complainant. The issue is not about who complains – it is about validating

as to whether we can take it on or not. With good information, we are able to warn potential customers if they are contemplating dealing with a contractor who may be ‘suspect’. We can also provide contractors with information about products and contractors that we have investi- gated and possibly about others. Sparks: How can companies join SAFEhouse? PN: Anyone wanting to join SAFEhouse or who wants to knowmore about the association can call me. To join SAFEhouse, companies must be signatory to the SAFEhouse constitution and code of conduct and commit to the member- ship contribution. Enquiries: 083 414 4980

and exposing the issue, whether product or service. Sparks: What should contractors look out for when selecting products? PN: Contractors should be suspicious when they come across prices that are substantially below the going rate for a product. Avoid un- branded products. Check for proper markings on the products – if the contractor is not sure what to look for, they are welcome to contact Safehouse for further information. Buy reputa- ble brands and deal with reputable wholesal- ers. If in doubt, check with SAFEhouse for any information they may have about a particular product. Sparks: How can SAFEhouse be of benefit to electrical contractors? PN: The Electrical Contractors’Association of SA is a member of SAFEhouse so members

For more information email Pierre Nothard at pierren@safehousesa.co.za

june 2015

sparks

ELECTRICAL NEWS

AIRCON SENSOR ... THE D.I.Y.

AIRCON OCCUPANCY SENSORS

FEATURES ECOS-2000

EcoSense 2000 will scan the room for occupancy, when no occupancy is detected, a signal will be transmitted and switch off the unit. Hereby saving power utilization. Supply Voltage: 5 x AAA batteries (no mains required) ECOS-4001 EcoSense 4001 is universally compatible with any A/C that can be operated by remote controller. Can be fitted directly adjacent to your A/C unit. Compatible with wireless accessories to further increase efficiency. Supply Voltage: Mains powered EcoSense copies the “off” signal from the Air Conditioner remote controller, thereby ensuring the A/C goes through its correct shut down procedure.

ECO 2000 ECO 4001

F I R S T I N S O U T H A F R I C A

http://www.acdc.co.za

ECO-WD

ECO-RC

NATIONAL CALL CENTRE Sales 010 492 3110 Technical 010 492 3120 www.acdc.co.za

BRANCH CONTACT DETAILS

Johannesburg:

010 492 3100 011 418 9600 021 492 2000 031 700 4215 031 492 4800

Germiston: Cape Town: Pinetown: Riverhorse:

contractors’ corner 11

Cut corners ... but heaven help you if something goes wrong Getting to grips with SANS 10142–1 by Hannes Baard

order against the employer and not against such employee or mandatary” scare me no end. Better to leave it to the boffins to decide who is who. 40. Exemptions (1) TheMinister may, for such period and on such conditions asmay be determined by him, exempt any employer or user or any category of employers or users, generally or with respect to any particular employee or category of employees or users or with respect to anymatter, fromany of or all the provisions of this Act or the provisions of a notice or direction issued under this Act. 41. This Act not affected by agreements Subject to the provisions of sections 10 (4) and 37 (2), a provision of this Act or a condition specified in any notice or direction issued there under or subject towhich exemptionwas granted to any person under Section 40, shall not be affected by any con- dition of any agreement, whether such agreement was entered into before or after the commence- ment of this Act or before or after the imposition of any such condition, as the casemay be. An example of the exemptions contemplated in Section 40 and all its subsections (1 through 6) including Section 41 can be found in the exemption that was granted in terms of the ‘Driven Machinery Regulations’in 2005. Pub- lished in Government Gazette No 27305, Notice R158, dated 18 February 2005, exemption was granted in terms of Section 40(1) until 29 April 2005 to all entities performing load testing on all liftingmachinery. It stated that liftingmachine inspectors should be registered by April 2005, but granted exemption until March 2006 when all such inspectors had to be registered with the Engineering Council of South Africa (ESCA). You are exempt till next time.

Inmy previous column, you learned that an inspector or the chief inspector can issue a‘prohi- bition notice’whereby a contractor or manufactur- ing facility is actually stopped from carrying on any further work. Subsection (5) acknowledges that the prohibition notice is such a significant ac- tion that an inspector would not summarily issue such notice without good reason and therefore, the prohibition will stand while you appeal the inspector’s actions. 36. Disclosure of information No person shall disclose any information concerning the affairs of any other person obtained by him in carrying out his functions in terms of this Act, except - (a) To the extent towhich it may be necessary for the proper administration of a provision of this Act; (b) For the purposes of the administration of justice; or (c) At the request of ahealthand safety representative or ahealthand safety committee entitled thereto. I can’t help but smile when I read Section 36. None of the information that came to your at- tention while you were carrying out your job as a safety rep, for instance, shall not make its way to Facebook now, you hear? 37. Acts or omissions by employees or mandataries. 38. Offences, penalties and special orders of court. 39. Proof of certain facts. Sections 37, 38 and 39 occupy some six or more pages in the Occupational Health and Safety Act so I’ll summarise because those sections are of more interest to the legal people when a case gets to court. Phrases such as “he shall be liable to be convicted and sentenced in respect thereof as if hewere the employer or user” and “make such an

So, it’s quite simple, even in the Occupational Health and Safety Act. Should you believe that an inspector has acted wrongly – perhaps that he has not considered all the facts or that he has misinter- preted the Act or a Regulation – you can write to the chief inspector (within 60 days of the inspec- tor’s decision) stating all the facts and the reasons you believe the inspector’s action was unjustified. But it does not end here… (3) Any person aggrieved by a decision taken by the chief inspector under subsection (1) or in the exercise of any power under this Act, may appeal against such decision to the industrial court, and the industrial court shall inquire into and consider thematter forming the subject of the appeal and confirm, set aside or vary the decision or substitute for such decision any other decisionwhich the chief inspector in the opinion of the industrial court ought to have taken. (4) Any personwhowishes to appeal in terms of subsection (3), shall within 60 days after the chief inspector’s decisionwas given, lodge such appeal with the registrar of the industrial court in accord- ancewith the rules of the industrial court. Maybe the above is a tadmore difficult and you will have to be very careful as you’re going to be telling the‘boss man’that he’s wrong. The difference between subsections (1) and (2) and (3) and (4) is that in the first two sections you are only saying the inspector was a bit harsh, but in the follow-on sections you are telling that to the chief inspector himself. Hopefully you’ll get a fair hearing… (5) An appeal under subsection (1) or (3) in connec- tionwith a prohibition imposed under Section 30 (1) (a) or (b) shall not suspend the operation of such prohibition.

IN last month’s column, we looked at the legisla- tive side of the Department of Labour’s inspec- tors who are appointed under the Occupational Health and Safety Act (Act 85 of 1993). We concen- trated on their powers and when and where they may conduct inspections, whether announced or unannounced. A close friend of mine in the industry often says, “Cut corners if you wish, but heaven help you if something goes wrong”. And, he’s not referring to the actual things going wrong, but rather the ‘legal eagles’and others who will appear fromout of nowhere to take a piece of your flesh. And isn’t it funny…youmay get away with cutting corners for a while but the moment something happens and people start asking questions, it’s amazing how the shadows come alive. So, let’s have a look at how to go about getting your butt out of it, if you really are not in the wrong… Section 35 of the Occupational Health and Safety Act (Act 85 of 1993) explains it like this: 35. Appeal against decision of inspector ( 1) Any person aggrieved by any decision taken by an inspector under a provision of this Act may appeal against such decision to the chief inspector, and the chief inspector shall, after he has considered the grounds of the appeal and the inspector’s reasons for the decision, confirm, set aside or vary the decision or substitute for such decision any other decisionwhich the inspector in the chief inspector’s opinion ought to have taken. (2) Any personwhowishes to appeal in terms of sub- section (1), shall within 60 days after the inspector’s decisionwasmade known, lodge such an appeal with the chief inspector inwriting, setting out the grounds onwhich it ismade.

BBBEE empowerment trust benefits previously disadvantaged employees sion for its people and the recognition of their loyalty and contribution to its success. “It was critical to the success of the

A FIRM belief that its employees are the glue that holds any business structure together and drives it towards sustain- ability forms the rationale behind the ZestWEG Group’s strategy to establish an empowerment company – Zest Empower Co (Pty) Ltd – which will have a 25.1 % shareholding in ZestWEG Elec- tric, the entity responsible for all sales within the borders of South Africa. Louis Meiring, CEO of ZestWEG Group, says,“The Group’s history is character- ised by fairness, trust and respect, a pas- sion for its work, excellence in customer service and the recognition of all people and communities. The Group has oper- ated a CSI initiative and its outreach has stretched across many areas of South Africa.” The beneficiaries of the empower- ment trust include all permanently employed, previously disadvantaged employees across all the South African operations of ZestWEG Group Africa. In an effort to outline the benefits that these employees will experience, the organisation launched a roadshow that was taken to all its operations in the country. The roadshow clearly explained the complexity and significance of the trust and emphasised the Group’s pas-

initiative that we maintain a high degree of transparency. The concept has been well accepted by employees and has stimulated increased levels of two-way communication, a positive contributor to driving improvements within the company,”says Meiring. ZestWEG Group’s philosophy of partnering not only with its customers but with its own people exhibits a cog- nisance that employees are, in fact, the most important customers in the busi- ness. This is evidenced by the fact that ZestWEG Group was previously black empowered through direct investment ownership by Medu Capital. “Interestingly, Medu Capital, which is a private equity investor, had an invest- ment horizon of five years but actually only exited the relationship after seven years. This move coincided with the start of official negotiations for the sale of Zest toWEG and once the negotiations were concluded we immediately began reviewing various options to ensure that we wouldmeet the BBBEE code of practice,”Meiring explains.

Louis Meiring, CEO of Zest WEG Group.

Zest WEG Group’s philosophy of partnering not only with its customers but with its own people exhibits a cognisance that employees are, in fact, the most important customers in the business.

Finding the most sustainable model, that would secure the interests of the business and simultaneously provide benefits for our employees, was ap- proached in a methodical and careful manner over an 18-month period. After careful consideration we believe that the current model is not only synergistic to all stakeholder needs, but is also extremely sustainable,”says Meiring. As part of the restructuring process, ZestWEG Electric will be introducing a new non-executive

boardmember – Jack Phalane an attorney from Fluxmans. “The company will continue on the strong foundation created over the past 35 years and will remain dedi- cated to the unwavering commitment and support to our customers. This new structure, we believe, will return us to a Level 4 BBBEE contributor status,”Meiring concludes.

ZestWEG Group Africa, a registered South African company, will be re- sponsible for all sales into Africa. All the manufacturing entities, namelyWEG Transformers Africa, Shaw Controls and ZestWEG Genset Division will become divisions of ZestWEGManufacturing. ZestWEGManufacturing will, in turn, be wholly owned by ZestWEG Group Africa. Enquiries: +27 11 723 6000

The GRID What is it? PROVEN RELIABILITY AND READILY AVAILABLE SWITCHGEAR TO MEET ALL YOUR NEEDS

The GRID is a graphic element that helps to create the ZEST indentity. Derivative of the proportions of the logo, it is based on a proportion of width and height of 2-to- 3. The distance between the GRID elements is 1/3 of the height of an element.

LV Switchgear Range Awarded the SABS mark

www.zest.co.za +27 11 723 6000

june 2015

sparks

ELECTRICAL NEWS

Made with