LTC KIT-WAUKESHA UZD

WAUKESHA UZD

UZD KITS

1030-001K KIT-REVERSE SW. UPGRADE 1030-001KE KIT-REVERSE SW, UPGRADE 1030-017K KIT-REVERSE SW. UPGRADE 1030-021K KIT-UZD CONTACT 1030-023K KIT-SELECTOR SWITCH 1030-024K KIT-TRANSFER STOCK

1030-025K KIT-MAIN SLIP CONTACT BOWTIE 1030-026K KIT-MAIN BREAKING CONTACT 1030-027K KIT-MAIN CONT. ARM W. ROLLERS 1030-029K KIT-COUNTER ASSEMBLY 1030-031K KIT-BODINE MOTOR REPLACEMENT 1030-036K KIT-TOOL 1030-042K KIT-BRAKE ROLLER UZD 1030-043K KIT-BREAK ROLLER BULLETIN 1030-1726K KIT-MAIN SEL. XFMRS PRIOR TO 1975 1030-1730K KIT-REV. CONT. ARM SUB-ASSY. 1030-1732K KIT-GASKETS 1030-1749K KIT-UZD, BUE, REPLACEMENT PARTS 1030-1757K KIT-LIMIT SWITCH 3 STAGE 1030-1756K KIT-LIMIT 2 STAGE 1030-1758K KIT-TRANS MODIF RETROFIT/33. 1030-2114K KIT-CONTACT HOLDER STAT. & HARDWARE

GASKETS & O-RINGS

UZD LTC

MISCELLANEOUS

INSULATING EPOXY DRIVE COUPLING

SWITCHING COMPARTMENT

FLANGE FOR INTERGRADED OIL FILTER PUMP MOTOR FLANGE FOR PRESSURE RELIEF DEVICE

FLANGE FOR RAPID PRESSURE RISE RELAY

CAST EPOXY PHASE MOLDING WITH CONTACTS ASSEMBLED

INTEGRATED OIL FILTER PUMP MOTOR

PRESSURE RELAY

REVERSING SWITCH DR. MECHANISM

TRANSITION RESISTORS

SPRING DRIVE MECHANISM

DRAIN

DRIVE SHAFT

FLANGE FOR UPPER FILL VALVE

BUE MOTOR DRIVE MECHANISM

UZD LTC ASSEMBLY

1030-1751K KIT-DOOR GASKET (WITH OIL FILTER SYS.) 1030-1753K KIT-DOOR GASKET (WITH OUT OIL FILTER SYS.)

1030-1750K KIT-DOOR GASKET (WITH OIL FILTER SYS.) 1030-1754K KIT-DOOR GASKET (WITH OUT OIL FILTER SYS.)

1030-1621 O-RING VALVE

1030-1646 MOTOR PUMP GASKET

1030-1613 PHASE MOLDING O-RING

1030-878 BEARING HOUSING O-RING

1030-879 SPRING DRIVE MECHANICAL O-RING

1030-461 DOOR O-RING AFTER 1989 (NEW DESIGN) 1030-475 DOOR GASKET PRIOR TO 1989 (OLD DESIGN)

1030-1620 LTC EXTENSION GASKET 1030-1624 DOOR MOTOR DRIVE GASKET ASSEMBLY 1030-1615 DOOR W/4 HOLES GASKET

ENCLOSURE GASKET SPRING DRIVE 1030-1619

1030-1614 DOOR W/2 HOLES GASKET

CLICK ON THIS NOTE FOR COMPLETE GASKET KIT, P/N 1030-1732K

UZD GASKETS LOCATIO

1030-025K

1030-1730K KIT, REV. CONTACT ARM SUBASSEMBLY

KIT, MAIN SLIP CONTACT BOWTIE

MAIN KIT 1030-021K KIT-UZD CONTACT

1030-017K KIT, REVERSE SWITCH UPGRADE SEE 1030-001K

1030-042K KIT, HARDWARE

1030-2115 INSULATION EPOXY DRIVE COUPLING

ASSEMBLY UZD BRAKE

KIT-HVS REV. SW. UPGRADE SEE 1030-001KE KIT-HVS REV. SW. UPGRADE

PRIOR TO 1975 UZD, XFMRS SELECTOR KIT, MAIN 1030-1726K

1030-2114K CONTACT HOLDER STATIONARY & HARDWARE

1030-026K KIT- MAIN BREAKING CONTACT

STOCK KIT, TRANSFER 1030-024K

1030-023K KIT- SELECTOR SWITCH

MOTOR DRIVE MECHANISM

ARM WITH ROLLERS KIT, MAIN CONTACT 1030-027K-OEM

1030-052P CONTACT ASSY. STATIONARY

SOME COMPONENTS IN THESE VIEWS HAVE BEEN BLANK OUT FOR CLARITY SCALE 0.200

CONTACT BOWTIE KIT, MAIN SLIP 1030-025K

UZD KITS & PARTS LOCATION

1030-2016 LIMIT SW., 4 STAGE OR 1030-1757K LIMIT SW., 3 STAGE OR 1030-1756K LIMIT SW., 2 STAGE

1030-2021 HAND CRANK INTERLOCK SW.

1030-2017 MAINTAINING CONTACT, 33 OR 1030-1758K TRANS MODIF RETROFIT/33

1030-2019 BRAKE ASSY. MOTOR DRIVE

1030-029K KIT-COUNTER ASSY.

1030-2018 START CONTACTOR, 33S

1030-834 DRIVE BELT

1030-1741K KIT-LIMIT SWITCH BRASS SET

1030-031K KIT-BODINE MOTOR REPLACEMENT

1030-1624 DOOR MOTOR DRIVE GASKET ASSEMBLY

1030-1749K KIT-UZD BUE REPLACEMENT PARTS (MAIN KIT)

MOTOR DRIVE MECHANISM

1030-2115 COUPLING INSULATING DRIVE

1030-2054 STANDARD PELICAN CASE ASSEMBLY FOR 1030-036K

1030-1756 STANDARD PELICAN CASE ASSEMBLY FOR 1030-021K V1

1030-036K TOOLS KIT

1030-052P CONTACT ASSEMBLY STATIONARY

1030-1754 CONTACT LTC - UZD (UNPLATED)

1030-1784 SHAFT

1030-1785 SHAFT ASSEMBLY SHORT

MISCELLANEOUS UZD

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

UZD

1030-1732K

1 E

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

NOTES: 1. FOR MORE DETAIL PLEASE SEE INDIVIDUAL GASKET DRAWINGS. THESE GASKETS USE IN UNIT WITH INTEGRATED OIL FILTER SYSTEM. THESE GASKETS USE IN UNIT WITH OUT INTEGRATED OIL FILTER SYSTEM.

5

1. ADDED GASKETS ON DRAWING PER ECR #150327A

C

3/27/15

TL

JP

1. REPLACED INDIVIDUAL GASKETS BY KITS PER ECR # 180921A 1. CHANGED QTY OF 1030-1752K & -1753K.

D

09/24/18

SK

JP

A

3 2

4

PER ECR # 181004C D1

10/04/18

SK

JP

A

6

2

1. ITEM # 6 WAS 1030-1752K PER ECR # 181220K

E

12/20/18

SK

JP

3

2

1

7

3

B

B

THIS O-RING USE ON LTC BUILD AFTER 1989 (NEW DESIGN)

C

C

D

1 1030-879 1 1030-878 2 1030-1621 1 1030-1646 2 1030-1620 1 1030-1619 3 1030-1613 1 1030-1753K 1 1030-1754K 1 1030-1751K 1 1030-1750K 1 1030-1624

GASKET, SPRING DRIVE MECHANICAL GASKET, BEARING HOUSING ASSY

14 13 12 11 10

3

2

D

O-RING VALVE

GASKET, LTC-UZD OIL FILTER GROUP

GASKET, OLTC EXTENSION

GASKET, SPRING DRIVE ENCLOSURE O-RING PHASE MOLDING UZD GASKET, DOOR LTC-UZD ASSY GROUP GASKET, DOOR LTC-UZD ASSY GROUP GASKET, DOOR LTC-UZD ASSY GROUP GASKET, DOOR LTC-UZD ASSY GROUP GASKET, DOOR MOTOR DRIVE ASSEMBLY

9 8 7 6 5 4 3 2 1

THIS GASKET USE ON LTC BUILD PRIOR

8

TO JUNE 1989 (OLD DESIGN)

E

E

1 1030-475 1 1030-461

DOOR GASKET (OLD DESIGN) DOOR O-RING (NEW DESIGN)

QTY DRAWING NO.

TITLE

ITEM NO.

14

PARTS LIST

9

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

10

P

13

12

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

11

F

102910B

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

GASKETS-KIT UZD LTC

DO NOT SCALE DRAWING

DRAWN

T. LY

01/18/11

MATERIAL ANALYSIS NUMBER:

NEXT ASSY

CHECKED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-1732K

QC

E

D

0.200

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

UZD

K1

1030-001K

1

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

1. REDRAWN REORGANIZE FOR CLARITY 2. ADDED HARDWARE

PER ECR #190426A K PER ECR# 200207B K1

4/26/19

TL

JP

A

1) ADD ADDITIONAL REF. TO ITEM 12 BAL.

2/7/2020

AM

JP

A

B

B

4 3

3 3

10 3

12 9

9 3

8 3

1 3

C

ISO VIEW SHOWN FOR REF. ONLY FOR MORE DETAIL SEE INSTRUCTION SHEETS

C

1 1030-130

INSTRUCTION SHEETS

10 11 12 13

3 8010-199-817 SCREW, HEX M10 X 1.5 X 45 LG SS 6 8010-199-811 SCREW, HEX M10 X 1.5 X 20 LG SS 9 8010-101-26 WASHER, BELLEVILLE, M10

5 3

D

D

3 1030-485 3 1000-083 1 1030-363 1 1030-364 3 1030-170 3 1030-480

SHIM, PACK SNAP RING

1 2 3 4 5 6 7 8 9

13 1

COBALT DRILL BIT, NO. C ( .242), COATED TAPERED REAMER NO. 5 STR. FLUTE

6 1

PIN, TAPERED

INSTRUCTION SHEETS

E

SHAFT ASSEMBLY, LONG

2 6

E

3 1030-060P RING, COLLECTOR

3 1030-054P CONTACT ASSY. MOVING, REVERSE SWITCH 6 1030-059P CONTACT, STATIONARY, SELECTOR SWITCH

11 6

7 1

QTY DRAWING NO.

TITLE

ITEM NO.

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

NEXT ASSY

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT - REVERSING SWITCH UPGRADE

DO NOT SCALE DRAWING

DRAWN

THREE PHASE ISO VIEW SHOWN FOR REF. ONLY ASSEMBLY NOT REQUIRED

T. LY

4/26/19

MATERIAL ANALYSIS NUMBER:

CHECKED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-001K

QC

D

1.000

K

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

UZD

D

1030-001KE

1

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

1. REDRAWN REORGANIZE FOR CLARITY 2. ADDED HARDWARE PER ECR # 190429A

D

4/29/19

TL

JP

A

A

B

4 3

B

12 6

9 3

3 3

10 3

8 3

C

1 3

ISO VIEW SHOWN FOR REF. ONLY FOR MORE DETAIL SEE INSTRUCTION SHEETS

C

1 1030-130

INSTRUCTION SHEETS

10 11 12 13

3 8010-199-817 SCREW, HEX M10 X 1.5 X 45 LG SS 6 8010-199-811 SCREW, HEX M10 X 1.5 X 20 LG SS 6 8010-101-26 WASHER, BELLEVILLE, M10

13 1

D

D

5 3

3 1030-485 3 1000-083 1 1030-363 1 1030-364 3 1030-170 3 1030-480

SHIM, PACK SNAP RING

1 2 3 4 5 6 7 8 9

INSTRUCTION SHEETS

COBALT DRILL BIT, NO. C ( .242), COATED TAPERED REAMER NO. 5 STR. FLUTE

6 1

PIN, TAPERED

E

SHAFT ASSEMBLY, LONG

E

3 1030-060E RING, COLLECTOR

2 6

3 1030-054E CONTACT ASSY. MOVING, REVERSE SWITCH 6 1030-059E CONTACT, STATIONARY, SELECTOR SWITCH

7 1

11 6

QTY DRAWING NO.

TITLE

ITEM NO.

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

NEXT ASSY

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT - REVERSING SWITCH UPGRADE (ELR)

DO NOT SCALE DRAWING

DRAWN

T. LY

4/29/19

MATERIAL ANALYSIS NUMBER:

CHECKED

THREE PHASE ISO VIEW SHOWN FOR REF. ONLY ASSEMBLY NOT REQUIRED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-001KE

QC

D

1.000

D

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

K

WAUKESHA UZD

1030-017K

1

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140203A

J

10/31/13

TL

JP

2 3

NOTES: 1. WAUKESHA P/N - 0550012R1306. PLACE ALL HARDWARE IN A PLASTIC BAG. PLACE THIS ITEM IN A SEPARATE PLASTIC BAG.

1. ADD HARDWARE TO DRAWING 8010-101-26, 8010-199-811 6 EA.

PER ECR #140321B K

A

3/21/14

TL

JP

A

2 3

7 6

2

B

B

10 6

2

4 6

2

1 3

9 12

2

11 6

2

C

C

D

D

6 8010-115-511 6 8010-115-509 12 8010-101-24 6 8010-199-811 6 8010-101-26

WASHER, BELLEVILLE, M10

10 11

8 6

3 6

SCREW, HEX HD M10 X 1.5 X 20 LG

2

3

SCREW, H HEAD, STEEL M5 X 0.8 X 20LG SCREW, HEX HEAD, STEEL M5 X 0.8 X 16 LG WASHER, BELLEVILLE 204 ID X .394 OD X .020 THK

2 3 4 5 6 7 8 9

3 1030-371P 3 1030-025K 6 1030-384P 6 1030-224 1 1030-380 1 1030-1203

BOTTOM TAP M10 X 1.5

E

WASHER, 2-HOLE DRAWING PACKET

E

CONTACT, STATIONARY REVERSING SWITCH

5 1

KIT - MAIN SLIP CONTACT (BOWTIE)

MOVING REV. CHANGEOVER SEL. SW. ASSEMBLY 1

ITEM NO.

QTY DRAWING NO.

TITLE

6 1

PARTS LIST

INSTALLATION DRAWING PACKET

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

P

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT - REVERSE SWITCH UPGRADE

DO NOT SCALE DRAWING

DRAWN

T. LY

10/31/13

MATERIAL ANALYSIS NUMBER:

NEXT ASSY 1030-021K

CHECKED

SCALE 2.000

SIZE

SCALE

DWG. NO.

REV. K

DATE ANALYSIS PERFORMED:

1030-017K

QC

D

1.500

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This Drawing contains proprietary information of SPX Transformer Solutions, Inc. and may not be disclosed, copied, modified or Used without the written permission of SPX Transformer Solutions, Inc. If SPX Transformer Solutions, Inc. has authorized your permission and/or use of this Drawing, SPX Transformer Solutions, Inc. has granted you a limited license to use this Drawing and the information in it only for purposes specified by SPX Transformer Solutions, Inc. The Drawing must be promptly returned to SPX Transformer Solutions, Inc. or destroyed after its use and/or upon demand by SPX Transformer Solutions, Inc. Any Possession, Disclosure, copying, modifications or use not authorized by SPX Transformer Solutions, Inc. can constitute a violation of applicable law and be subject to severe penalities.

HIGH VOLTAGE SUPPLY

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

1 U 1030-021K

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140314B 1. ADD TANK DOOR GASKET

P

11/19/13

TL

JP

NOTES: 1. VI FOR 33-STEP TAP CHANGER. V2 FOR 17-STEP TAP CHANGER.

PER ECR # 140701A R PER ECR #150326B R1

7/2/14

TL

JP

A

1. REMOVE SHEETS 3 TO 5, NPOBK

3/26/15

JP

TL

1. REMOVE V2 STAT. CONTACT 2. ADD NOTE 1, PER ECR #190115D 1. LINK PALICAN CASE TO NEXT ASSEMBLY

A

T

TL

JP

1/15/19

PER ECR #190215C T1 PER ECR #191002A U

TL

2/19/19

JP

5 54

1. ADDED QTY OF 12 TO 1030-052P, V2

V1 ONLY

6 108

TL

JP

10/2/19

7 108

3 1

B

B

1 3

4 3

2 1

C

C

D

D

INSTALLATION DRAWING PACKAGE

SEE SHEET 2 FOR CONTINUE B.O.M.

1 1 1030-017K 1 1 1030-042K 3 3 1030-025K 12 54 1030-052P 108 108 8010-099-509 108 108 8010-198-06

WASHER, LOCK SST M5

1 2 3 4 5 6 7

KIT - MAIN SLIP CONTACT (BOWTIE) CONTACT ASSEMBLY, STATIONARY SCREW, SHD STEEL, M5 X .8 X 16 LG

E

E

KIT - BRAKE ROLLER

KIT - REVERSE SWITCH UPGRADE

3 3 1030-027K-OEM KIT - MAIN CONT. ARM W ROLLER (PER PHASE)

ITEM NO.

V2 V1 DRAWING NO.

TITLE

QTY

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

P

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

DO NOT SCALE DRAWING

KIT - UZD CONTACT

DRAWN

11/19/13 T.LY

MATERIAL ANALYSIS NUMBER:

NEXT ASSY 1030-1756

CHECKED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-021K

U

QC

1.000

D

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This Drawing contains proprietary information of SPX Transformer Solutions, Inc. and may not be disclosed, copied, modified or Used without the written permission of SPX Transformer Solutions, Inc. If SPX Transformer Solutions, Inc. has authorized your permission and/or use of this Drawing, SPX Transformer Solutions, Inc. has granted you a limited license to use this Drawing and the information in it only for purposes specified by SPX Transformer Solutions, Inc. The Drawing must be promptly returned to SPX Transformer Solutions, Inc. or destroyed after its use and/or upon demand by SPX Transformer Solutions, Inc. Any Possession, Disclosure, copying, modifications or use not authorized by SPX Transformer Solutions, Inc. can constitute a violation of applicable law and be subject to severe penalities.

SEE PARTS LIST

1 of 2

4

1

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

2 U 1030-021K

15 1

8 1

16 1

SCALE 0.200 THIS GASKET USE ON LTC BUILD PRIOR TO 1989 (OLD DESIGN)

SCALE 0.200 THIS GASKET USE ON LTC BUILD AFTER 1989 (NEW DESIGN)

13 2

14 2

SCALE 2.000

9 21

10 1

5 12

11 1

12 1

2 2 1030-470 1 1 1030-475 1 1 1030-461

TANK DOOR GASKET (OLD DESIGN) TANK DOOR GASKET (NEW DESIGN)

10 11 12 13 14 15 16

ROLLER ASSEMBLY

21 - 1030-1754P 1 1 1030-375 1 1 1030-472 1 1 1030-460 2 2 8010-200-103

PIN, COTTER SST, M2 X 12LG

LOCTITE 271

GREASE

GLUE (LOCKTITE 422)

V2 ONLY

CONTACT, DUAL STATIONARY

8 9

1 1 1030-1730K-V2 REVERSING CONTACT ARM SUBASSEMBLY

ITEM NO.

V2 V1 DRAWING NO.

TITLE

QTY

PARTS LIST

SIZE

SCALE

DWG. NO.

REV.

U 1030-021K

1.000

D

KIT - UZD CONTACT

MATERIAL

SHEET

SEE PARTS LIST

2 of 2

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD & ABB UZF

G1

1030-023K

1

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140214B

F

2/18/14

TL

JP

NOTES: 1. FOR UZD GASKETS SEE DRAWING 1030-1732K.

1. REMOVE GASKETS AND ADDED REF. NOTE PER ECR # 140324A

G

TL

JP

3/24/14

A

1. REMOVE V1 AND V2 IN BOM 2. CHANGE BALLOONS TO SPLIT QTY. 3. CHANGES TEXT SIZE, LARGER PER ECR #170120B

G1

1/20/17

TL JP

A

1 3

B

2 3

B

C

C

D

D

3 54

3 1030-027K-OEM KIT-MAIN CONTACT ARM WITH ROLLERS (PER PHASE) 1 3 1030-025K KIT- MAIN SLIP CONTACT (BOWTIE) 2 54 1030-052P CONTACT ASSEMBLY, STATIONARY 3 108 8010-099-509 SCREW, CAP, SOC. HD ST M5X.8 X 16 LG 4 108 8010-198-06 WASHER, LOCK, SS. M5 5

E

4 108

E

5 108

ITEM NO.

QTY DRAWING NO.

TITLE

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT - SELECTOR SWITCH

DO NOT SCALE DRAWING

DRAWN

T. LY

11/7/13

MATERIAL ANALYSIS NUMBER:

NEXT ASSY 1030-021K

CHECKED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-023K

G1

QC

D

1.000

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This Drawing contains proprietary information of SPX Transformer Solutions, Inc. and may not be disclosed, copied, modified or Used without the written permission of SPX Transformer Solutions, Inc. If SPX Transformer Solutions, Inc. has authorized your permission and/or use of this Drawing, SPX Transformer Solutions, Inc. has granted you a limited license to use this Drawing and the information in it only for purposes specified by SPX Transformer Solutions, Inc. The Drawing must be promptly returned to SPX Transformer Solutions, Inc. or destroyed after its use and/or upon demand by SPX Transformer Solutions, Inc. Any Possession, Disclosure, copying, modifications or use not authorized by SPX Transformer Solutions, Inc. can constitute a violation of applicable law and be subject to severe penalities.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

1 1030-024K

C1

REVISIONS

LTR

REVISION

DATE

APPROVAL

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140407B

C

04/07/14

TL

JP

1

3 1030-485 3 1030-1785

SHAFT, ASSEMBLY SHORT (LTC-UZD-ASSY, GROUP)

1 2

SHAFT, ASSEMBLY LONG

QTY DRAWING NO.

TITLE

ITEM NO.

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

2

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

APPROVALS

DATE

DO NOT SCALE DRAWING

KIT - TRANSFER STOCK

NEXT ASSY

DRAWN

MATERIAL ANALYSIS NUMBER:

T. LY

11/13/13

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

C1 1030-024K

QC

B

1.000

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

1 of 1 SEE PARTS LIST

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

1 1030-025K

H

REVISIONS

NOTES: 1. SEAL ALL PARTS IN A PLASTIC BAG. 2. ONE KIT PER PHASE. 3. WAUKESHA UZD P/N-0970601R0025, SAP P/N-2044582.

LTR

REVISION

DATE

APPROVAL

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140127B 1. CHANGE WASHER FROM:8010-068-63 TO: 8010-166-21. 2. CHANGE WAU. FROM: P/N 097061R0025 TO: 0970601R0025. 3. ADDED SAP NO. 2044582. PER ECR #170427C

F

10/16/13

TL

JP

G

4/26/17

TL JP

1. ITEM # 6 WAS 8010-166-21 PER ECR # 170517B

8 2

H

05/18/17

SK JP

7 2

2 2

6 4

1 2 4 1 2 4 2 2 1

8010-115-516 8010-166-03 8010-188-06 8010-193-06 8010-199-817

SCREW, HEX M10X1.5-6gX45LG SS

1 2 3 4 5 6 7 8 9

5 2

NUT, LOCKING, NYLON INSERT S.S. M5X.8

1 1

4 1

9 1

WASHER, FLAT SST #10 NUT, PLAIN HEX M5X.8

SCREW, HEX HEAD METRIC M5X.8X40 LG, CAD-ZN ST

1030-065P 1030-071 1030-232P 1030-476

WASHER, CONE DISC

CONTACT BAR

COMPRESSION, SPRING

CONTACT TUBE

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

3 4

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

KIT- MAIN SLIP CONTACT (BOWTIE)

APPROVALS

DATE

DO NOT SCALE DRAWING

NEXT ASSY 1030-017K 1030-021K 1030-023K

DRAWN

MATERIAL ANALYSIS NUMBER:

T. LY

10/16/13

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

SHEET 1 of 1 SEE PARTS LIST H 1030-025K

QC

B

1.000

MATERIAL

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD, ABB UZE & ABB UZF

1 1030-026K

A

REVISIONS

LTR

REVISION

DATE

APPROVAL

NOTES: 1. WUAKESHA P/N - 0765500R0002.

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140213C

A

11/4/13

TL

JP

2

1

4

3

12 8010-115-509 12 8010-101-24

WASHER, BELLEVILLE

1 2 3 4

SCREW, HEX. HD. M5-8 X 16 LG

6 1030-217 12 1030-222

ROLLER ASSEMBLY 2-HOLES WASHER

ITEM NO.

QTY DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

KIT - MAIN BREAKING CONTACT (PER PHASE)

APPROVALS

DATE

DO NOT SCALE DRAWING

NEXT ASSY 1030-027K-OEM

DRAWN

MATERIAL ANALYSIS NUMBER:

T. LY

10/31/13

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

SHEET 1 of 1 SEE PARTS LIST A 1030-026K

QC

B

1.000

MATERIAL

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD & ABB UZF

1030-027K-OEM

1 J1

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

NOTES: 1. WAUKESHA P/N - 0550012R1044. SAP P/N - 2039529. PLACE ALL HARDWARE IN A PLASTIC BAG. PLACE THIS ITEM IN A SEPARATE PLASTIC BAG.

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140211A 1. ADDED SAP # TO NOTE 1.

J

11/7/13

TL

JP

2

PER ECR # 150326B J1

12

3/26/15

TL

JP

A

A

2

4

2

3

2

14

B

SHIELD ARCING SHOWN IN TRANSPARENT COLOR FOR CLARITY ONLY. THIS ITEM COMES IN SOLD BLACK PHENOLIC.

B

9

2

1

3

C

6

2

C

3

3

10

2

2 8010-168-113 2 8010-100-06 2 8010-115-715 2 8010-115-516 2 8010-115-514 2 8010-069-20 6 8010-101-19

WASHER, BELLEVILLE M5

10 11 12 13 14

WASHER, FLAT M8

7

11

2

2

BOLT, HEX HD. M8 X 1.25 X 35 LG BOLT, HEX HD. M5 X 0.8 X 40 LG BOLT, HEX HD. M5 X 0.8 X 30 LG

D

13

2

D

SHIELD, ARCING TAB, LOCKING, SST TAB, LOCKING, SST TAB, LOCKING, SST WASHER, BELLEVILLE PIN, SPRING 3 DIA X 30 LG NUT, HEX PLAIN M5 X 0.8

1 2 3 4 5 6 7 8 9

2

5

3

2

1 1030-214P 1 1030-459 2 1030-209 1 1030-210 1 1030-205 2 1030-208 2 1030-206

E

E

CONTACT ASSEMBLY, RESISTOR

CONTACT ARM ASSEMBLY

ITEM NO.

QTY DRAWING NO.

TITLE

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

9011 GOVERNORS ROW DALLAS, TEXAS 75247

8

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

2

KIT - MAIN CONTACT ARM WITH ROLLERS (PER PHASE)

DO NOT SCALE DRAWING

DRAWN

T. LY

11/7/13

MATERIAL ANALYSIS NUMBER:

NEXT ASSY 1030-021K 1030-023K 1030-021K-COMED

CHECKED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-027K-OEM

QC

J1

D

1.500

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This Drawing contains proprietary information of SPX Transformer Solutions, Inc. and may not be disclosed, copied, modified or Used without the written permission of SPX Transformer Solutions, Inc. If SPX Transformer Solutions, Inc. has authorized your permission and/or use of this Drawing, SPX Transformer Solutions, Inc. has granted you a limited license to use this Drawing and the information in it only for purposes specified by SPX Transformer Solutions, Inc. The Drawing must be promptly returned to SPX Transformer Solutions, Inc. or destroyed after its use and/or upon demand by SPX Transformer Solutions, Inc. Any Possession, Disclosure, copying, modifications or use not authorized by SPX Transformer Solutions, Inc. can constitute a violation of applicable law and be subject to severe penalities.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

1 1030-029K

C

REVISIONS

LTR

REVISION

DATE

APPROVAL

NOTES: 1. WAUKESHA P/N: SAP 2059792 (055012R1022). 2. SEAL ALL COMPONENTS IN PLASTIC BAG. 3. ASSEMBLY SHOWN FOR REFERENCE ONLY ALL COMPONENTS SHIP NOT ASSEMBLE AND IN PLASTIC BAG.

1. REDRAWN ON PRO/E DATA BASE PER ECR #140328B

C

4/2/14

TL

JP

3 1

2 1

5 2

6 2

10 2

9 2

1 1

1 1 1 1 2 2 1 7 2 2

8010-116-04 8010-166-21 8010-168-113 8010-221-32 8010-224-305 8010-225-03

SNAP RING, EXTERNAL, 3M

10

WASHER, FLAT ID .476, OD .787, .02 THK SCREW, PAN HD, PHILLIPS M3 X 0.5 X 8 LG

1 2 3 4 5 6 7 8 9

PIN, SPRING 3MM X 30MM

7 1

WASHER, FLAT SST .209 ID X .394 OD X .039 THK

4

WASHER, LOCK METRIC M3

8 7

1030-705 1030-708 1030-709 1030-713

CONNECTING, ARM COUNTER, ASSEMBLY INSTRUCTION SHEET

DRIVE DISC., COUNTER ASSEMBLY

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247 KIT- COUNTER ASSEMBLY

X° ± 1°

TITLE

APPROVALS

DATE 4/2/14

DO NOT SCALE DRAWING

NEXT ASSY

DRAWN

MATERIAL ANALYSIS NUMBER:

T. LY

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

SHEET 1 of 1 SEE PARTS LIST C 1030-029K

QC

B

1.000

MATERIAL

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUAKESHA UZD

1 D1 1030-031K

REVISIONS

NOTES: 1. WAUKESHA P/N - 0550012R1145.

LTR

REVISION

DATE

APPROVAL

1) REDRAWN IN PRO-E DATA BASE

PER ECR# 150521A D1

TA JP 05-20-15

7 15

3 1

5 3

6 2

4 4

2 30

WIRING DIAGRAM

15

8010-236-01 8010-156-01 8010-235-01 8010-150-04

TIE, CABLE, NATURAL-COLOR, NYLON, .13W X 8.0 LNG

1 2 3 4 5 6 7

1 1 1 4 3 2

SPADE TERMINAL, NON-INSULATED #22-#18 TERMINAL, QUICK DISC., INS. #16-14 AWG BUTT SPLICE, STEP ASSY, #16-14 TO #22-18

1030-718 1030-722 1030-787

MOTOR ASSEMBLY WIRE (30 INCHES) WIRING DIAGRAM

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

-

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

- - - - - - NEXT ASSY

-

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

1 1

TITLE

KIT-BODINE MOTOR REPLACEMENT

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

T. LY TIM A

03-27-15 03-27-15

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

D1 1030-031K

QC

B

0.375

-

-

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

1030-036K

1

J

REVISIONS

NOTES: 1. REMOVE SUPPLIER PACKAGING AND PUT IN PLASTIC BAG. INVENTORY DISCRETION.

DATE APPROVAL

DESCRIPTION

REV

1. REDRAWN IN PRO/E DATA BASE

PER ECR #150612D G1 PER ECR #190223A G2 1. UP-DATE NOTES PER ECR#201030A G3 DETAIL PER ECR # G4

6/1/15

TL JP

1. ADDED LINK TO FOAM KIT

2/22/19

TL JP

A

10/30/20

TL JP

A

MODIFIED DESCRIPTIONS TO ADD MORE

02/04/21

AG JP

13 1

12 1

7 1

6 1

1 1

8 1

14 1

2 1

10 1

3 1

ADDED ITEM 20, 1030-2193, AND ITEM 21, 1030-2194 TO THE BOM PER ECR #220705D ADDED ITEM 1030-2216 TO KIT PER ECR #230907A

H

7/5/22

MS JP

J

09/07/23

SM JP

B

B

C

C

1 1030-763 1 1030-764 1 1030-765 1 1030-766 1 1030-767 1 1030-772 1 1030-776

ALIGNMENT TOOL FOR STAT. REV. SW. CONTACT

10 11 12 13 14 15 16 17 18 19 20 21 22 23

DRILL BIT HSS 6.0 X 200 MM MODIFIED WRENCH, OPEN END MODIFIED WRENCH, BOX END MODIFIED 3/8" DRIVE SOCKET 10MM 1/4" DRIVE, HEX DRIVER SOCKET 4MM 3/8" DRIVE, HEX DRIVER SOCKET 5MM 3/8" DRIVE, HEX DRIVER SOCKET 6MM 3/8" DRIVE, HEX DRIVER SOCKET 4MM GAGE, CONTACT ROLLER ASSEMBLY

D

D

1 1030-1125 1 1030-1503 1 1030-1560 1 1030-2193 1 1030-2194 1 1030-2216 1 1030-741 1 1030-742 1 1030-743 1 1030-745 1 1030-746 1 1030-747 1 1030-754 1 1030-758 1 1030-760-001 1 1030-760-003

RATCHETING BOX END WRENCH W/25 OFFSET 15MM & 17MM

MODIFIED C-CLAMP ASSEMBLY

1/4" DRILL EXTENSION EXTENDABLE MIRROR

STEEL SCALE HEX WRENCH

1 2 3 4 5 6 7 8 9

E

DRILL TOOL BLOCK ASSY. REV SW SHAFT

E

BOW-TIE ASSEMBLY TOOL, REVERSING SWITCH BOW-TIE ASSEMBLY TOOL, SELECTOR SWITCH TOOL,ALIGNMENT,UZD,STATIONARY CONTACT HOLDER

4 1

5 1

18 1

17 1

19 1

20 1

21 1

11 1

15 1

9 1

16 1

22 1

23 1

5/16" DRILL EXTENSION

DRILL ALIGNMENT TOOL FOR SELECTOR SW SHAFT

TAPERED REAMER WITH SHAFT COLLAR

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

1030-2054 NEXT ASSY

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

DO NOT SCALE DRAWING

KIT- UZD TOOLS

DRAWN

T. LY

6/1/15

MATERIAL ANALYSIS NUMBER:

CHECKED

A. GAYTAN

02/04/21

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-036K

QC

J

D NONE

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

1 1030-042K

B

REVISIONS

LTR

REVISION

DATE

APPROVAL

1. REDRAWN ON PRO/E DATA BASE PER ECR # 140221B 1. CHANGE THE ASSY # FROM 2030-021K-COMED TO 1030-021K-COMED IN NEXT ASSY BOX. 2. ADD ASSY # 1030-21K PER ECR # 140429A

A

3/10/14

TL

JP

B

8/29/14

SK JP

2 2

3

INSTRUCTION SHEET

1 2

2 2 1

1030-468 1030-827 1030-863

INSTRUCTION SHEET

1 2 3

HARDWARE ASSEMBLY, UZD BRAKE

BRAKE ASSEMBLY, UZD

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

P

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

KIT-BRAKE ROLLER UZD

APPROVALS

DATE

DO NOT SCALE DRAWING

NEXT ASSY 1030-042K 1030-021K 1030-021K-COMED

DRAWN

MATERIAL ANALYSIS NUMBER:

T. LY

3/10/14

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

SHEET 1 of 1 SEE PARTS LIST B 1030-042K

QC

B

1.000

MATERIAL

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

WAUKESHA UZD

A

1030-1726K

1

REVISIONS

DATE APPROVAL

DESCRIPTION

REV

NOTES: 1. WAUKESHA P/N - 0550012R1632.

1. REDRAWN, REORGANIZE FOR CLARITY 2. ADDED SNAP RING PER ECR # 190424A 1. ADDED #6 DRILL BIT, TAPERED REAMER 2. REPLATE SCH SCREW TO HEX HD PER ECR #190701B 1. CHANGED ITEMS 1-10 TO BE 1030-2166 AS PURCH FROM WAUKESHA PER ECR #210805F

G

4/24/19

TL

JP

2. 1030-1726K-V1 IS FOR THREE PHASE (SAP# 2062624). 3. 1030-1726K-V2 IS FOR SINGLE PHASE (SAP# 2062623).

A

H

7/1/119

TL

JP

A

H1

8/10/21

KM

JP

SNAP RING

PHASE MOULDING

SHAFT ASSY.

INSTRUCTION MANUAL

CONTACT ARM

B

B

C

C

USE SHIMS AS NEED FOR HORIZONTAL ALIGNMENT.

FOR MORE DETAIL SEE INSTRUCTION MANUAL

V1 THREE PHASE ISO VIEW SHOWN FOR REF. ONLY ASSEMBLY NOT REQUIRED

D

D

15 1

DISCARD SETSCREW AFTER DRILL AND PIN

INSTRUCTION MANUAL

N/A 1 1 PRE-75UZD-MANUAL INSTRUCTION MANUAL

11 12 13 14 15

2004210 2004211 1 3 1030-2166 2006056 1 3 1030-479 N/A 1 3 1030-480 N/A 1 1 1030-2067 N/A 1 1 1030-758 N/A 1 1 1030-1125

TAPERED REAMER

14 1

#6 DRILL BIT

E

DRILL BIT, 3MM

E

TAPER PIN SNAP RING

4

13 1

MAIN SELECTOR UZD, XFMRS PRIOR TO 1975

1

11 1

ITEM NO.

4 1

SAP NO. V2 V1 DRAWING NO.

TITLE

DRILL AND PIN ON SIDE

N/A QTY

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

12 1

C

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

1030-1726K NEXT ASSY

9011 GOVERNORS ROW DALLAS, TEXAS 75247

1 1

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT-MAIN SELECTOR UZD, XFMRS PRIOR TO 1975

V2 SINGLE PHASE ISO VIEW SHOWN FOR REF. ONLY ASSEMBLY NOT REQUIRED

DO NOT SCALE DRAWING

DRAWN

T. LY

4/24/19

MATERIAL ANALYSIS NUMBER:

CHECKED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1030-1726K

QC

D

0.750

A

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6