Norsk Standard MFM

NS-EN 474-1 :2006+A3:2013

EN 474-1 :2006+A3:2013 (E)

0.6 Roll-over protective structures (ROPS) for elevating station On machines where a ROPS is required (e.g. trenchers), lEi) EN ISO 3471:2008 ®.1 applies with the following exceptions: the ROPS for the operator's station shall be regarded as a separate independent ROPS (ROPS not connected to the machine frame); only the vertical load test of lEi) EN ISO 3471:2008 ®.1, 6.3, shall be applied in all planes; in the case of symmetrical design of the structure in one or more direction(s): front/rear, left/right, top/bottom, only one test is required in this/these particular direction(s); lEi> EN ISO 3471:2008 ®.I, 8.8, does not apply.

D.7 Operation manual

The operation manual shall contain safety instructions for elevating stations, e.g.:

the use of seat belts;

station position when travelling;

emergency instructions;

the use of mechanical support device for maintenance.

0.8 Marking

The carrier shall be marked by the following:

the number of persons permitted on the carrier;

the maximum working load. ®.1

45