BalloonBasics_Vol3

For best results, replace the red cap after each use. To obtain maximum productivity, periodically soak the pump in hot tap water overnight.

MAKE THE RIGHT CHOICE Tips about clips

For further information visit: www.hi-float.com

Choosing the proper clip is important.

HF116 Pump Set

CLIP GUIDE

Customers are willing to pay a little more for a treated balloon! Offer your clientele an education on HI-FLOAT ® and its benefits . . . sure to bring you and your customers extra joy.

IT’S A FACT

ULTRA HI-FLOAT ® Clip Size

SUPER HI-FLOAT ® Clip Size

Balloon Size

9"

purple

not recommended

11" with 60/40 inflator

purple

not recommended

11"

orange

gray

14"

2 strokes orange

2 strokes gray

EXPERT ADVICE Helpful hints + tips from industry elites

16"

2 strokes gray

3 strokes gray

24"

3 strokes gray

4 strokes gray

Decrease the amount of HI-FLOAT ® when treating pearl or metallic latex balloons. These balloons are heavier due to composition and will float better if slightly less HI-FLOAT ® is used.

30"

2 strokes no clip

3 strokes no clip

36"

3 strokes no clip

4 strokes no clip

40"

4 strokes no clip

5 strokes no clip

48"

¾ cup (add with funnel)

1 cup (add with funnel)

60"

1 cups (add with funnel)

2 cups (add with funnel)

ULTRA HI-FLOAT ® + SUPER HI-FLOAT ® INFORMATION

For use with latex balloons only.

Average Float Time Helium + ULTRA HI-FLOAT ® *

Average Float Time Helium + SUPER HI-FLOAT ® *

Latex Balloon Size

Average Float Time Helium Only *

Latex Balloon Type

Average # per 242 cf Tank

11"

Standard Colors

485

12–24 hours

1–4 weeks

4–10 days

11"

Metallic + Pearl

485

12–24 hours

1–3 weeks

4–7 days

14"

Round

240

26–30 hours

2–5 weeks

8–14 days

16"

Round

180

30+ hours

3–7 weeks

14–20 days

18"

Round

130

36+ hours

3–8 weeks

16–24 days

16"

GEO Donut ®

340

22–26 hours

4–12 days

3–5 days

16"

GEO Blossom ®

400

18–24 hours

3–10 days

2–4 days

24"

Round

50

2–4 hours

4–10 weeks

18–30 days

3'

Giant

15

3–5 hours

6–20 weeks

4–8 weeks

* Please remember that these are estimates based on typical indoor conditions and following all of the HI-FLOAT ® instructions. Float time will be less if outdoors. Float time varies greatly due to factors such as latex quality, humidity, temperature, altitude, etc. Balloons typically last half as long in hot, humid weather. For maximum float time, hand-tie balloons. Float time estimates for ULTRA HI-FLOAT ® + SUPER HI-FLOAT ® are from the manufacturer. cf cubic feet

13

Phone 800-241-2094 + Fax 800-880-9759

Made with FlippingBook flipbook maker