Master Flash Flashings Catalog

Master Flash full flashing products catalog

Master Flash ® Quality and Service Worldwide Since 1968

2/2016

Master Flash ® Roof Pitch Calculator

YEAR WARRANTY 35

Aztec Washer Company 13821 Danielson Street, Poway, CA 92064 1.800.WASHER 5 (927-4375) • Ph: (858) 513-4350 • Fax: (858) 513-4305 • info@aztecwasher.com • www.aztecwasher.com

YEAR WARRANTY 35

35 Year Master Flash ® The only ICC flashing of its kind, listed with the Florida and California Building codes ® .

ISO Quality, Price & Availability • 14 Sizes ADVANCED OZONE RESISTANCE tested to...

EPDM 70 hour @ 500 pphm

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent Continuous

+135°C (+275°F) +100°C (+212°F) – 55°C (-67°F) 25%

LOW TEMPERATURE RESISTANCE tested to... COMPRESSION SET Maximum...

*Complete specification data and testing methods are available upon request.

Made of EPDM, this flashing is designed for maximum resistance to all weather conditions

Pipe Range: 1/8” to 28-1/2

Flexibility absorbs vibration and pipe movement. On site customization pipe diameters can be seen clearly for proper pipe fitting

The base is designed to fit virtually all panel configurations and roof pitches regardless of pipe location

35 Year Master Flash® Compliance with the following codes:

Master Flash ® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and Mechanical Officials (for the Uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with type “B” vents. Listed with IAPMO certification No. 3121 ICC-ES is a subsidiary of the International Code Council, a membership association dedicated to building safety and fire prevention that develops the codes used to construct residential and commercial buildings, including homes and schools. Most U.S. cities, counties and states that adopt codes choose the International Codes developed by the International Code Council. INTERNATIONAL BUILDING CODE ® (IBC) • INTERNATIONAL RESIDENTIAL CODE ® (IRC) CALIFORNIA BUILDING CODE ® (CBC) • CALIFORNIA RESIDENTIAL CODE ® (CRC) FLORIDA BUILDING CODE ® (IBC) • FLORIDA RESIDENTIAL CODE ® (IRC) ICC-ES is the United States’ leading source of technical information on building products and building technology for code compliance. ICC-ES performs technical evaluations of building products, components, methods and materials. The evaluation process culminates with the issuance of reports on compliance with the major U.S. building codes, which are available at www.icc-es.org.

4

1

2

5

3

Fasten to Complete

Apply Sealant

Form to Roof Profile

Slide Over Pipe

Choose Pipe Opening and Trim

YEAR WARRANTY 35

Pipe Size

Compound

Part No.

Flashing Details

B-Cut to suit pipe size 1/8” – 3/4” (3 - 19mm) A-Top opening Closed C-Base 2 - 1/4” (57mm)

A

B

Mini

1/8”– 3/4” (3 - 19mm)

ICC-SQ051BX

Black EPDM

C

A

Closed

B-Cut to suit pipe size A-Top opening B-Cut to suit pipe size A-Top opening C-Base B-Cut to suit pipe size A-Top opening C-Base B-Cut to suit pipe size A-Top opening C-Base B-Cut to suit pipe size A-Top opening C-Base B-Cut to suit pipe size A-Top opening C-Base C-Base

1/4”- 2-3/4” (6 - 70mm)

#1

B

Black EPDM

ICC-SQ101BX

Closed 1/4” – 2-3/4” (6 - 70mm) 4-1/2” (114mm) 7/8” (22mm) 7/8” - 4” (22 - 101mm) 6” (152mm) 1/4” – 5-3/4” (6 - 146mm) 8” (203mm) 2-1/4” (57mm) 2-3/4”– 7” (70 - 177mm) 10” (254mm) 3-1/2 (89mm) 4” – 8-1/4” (101 - 209mm) 11” (279mm) 3-3/4” (95mm) 4-3/4” – 10” (120 - 254mm) 12” (304mm) 5-1/2” – 11-1/2” (140 - 292mm) 14” (355mm) 5-1/2” (140mm) 6-3/4” – 13-1/2” (171 - 343mm) 4-3/4” (120mm)

C

A

B

#2

7/8”- 4” (22 - 101mm)

Black EPDM

ICC-SQ201BX

C

A

#3

1/4” - 5-3/4” (6 - 146mm)

B

Black EPDM

ICC-SQ301BX

C A

B

2-3/4” - 7” (70 - 177mm)

#4

ICC-SQ401BX

Black EPDM

C A

B

#5

4” - 8-1/4” (101 - 209mm)

Black EPDM

ICC-SQ501BX

C

A

B

4-3/4” - 10” (121 - 254mm)

#6

ICC-SQ601BX

Black EPDM

C A

A-Top opening

B

5-1/2” - 11-1/2” (140 - 292mm)

#7

B-Cut to suit pipe size

ICC-SQ701BX

Black EPDM

C-Base

C

A

B-Cut to suit pipe size A-Top opening

B

#8

6-3/4” - 13-1/2” (171 - 343mm)

Black EPDM

ICC-SQ801BX

C-Base

17” (431mm)

C

A

Closed

B-Cut to suit pipe size A-Top opening C-Base B-Cut to suit pipe size A-Top opening C-Base

#8X Fix-A-Flash

B

Closed Top 0” - 15” (0 - 381mm)

0” - 15” (0-381mm) 19-1/2” (495mm)

Black EPDM

ICC-SQ801BXC

C

A

6-3/4” (171mm) 6-3/4” - 15” (171 - 381mm)

B

#8X Fix-A-Flash

Open Top 6-3/4”- 15” (171 - 381mm)

Black EPDM

ICC-SQ801BX0

19-1/2” (495mm)

C

A

8” (203mm)

A-Top opening

B

9-1/2” – 20-1/2” (241 - 520mm)

#9

9-1/2” – 20-1/2” (241 - 520mm) 25” (635mm) 6” (152mm) 8” – 20-1/2” (203 - 520mm) 25” (635mm)

B-Cut to suit pipe size

Black EPDM

ICC-SQ901BX

C-Base

C A

B-Cut to suit pipe size A-Top opening C-Base B-Cut to suit pipe size A-Top opening

B

#9X

8” - 20-1/2” (203 - 520mm)

Black EPDM

ICC-SQ901BXM

C A

Closed 0” - 28-1/2” (0 - 724mm)

B

Closed Top 0” - 28-1/2” (0 - 724mm)

Maxi Closed

Black EPDM

ICC-SQ951BX-C

34” (863mm)

C-Base

C A

10-1/4” (260mm) 12” - 28-1/2” (304 - 724mm)

B-Cut to suit pipe size A-Top opening

B

Maxi Open

Open Top 12” - 28-1/2” (304 - 724mm)

Black EPDM

ICC-SQ951BX

34” (863mm)

C-Base

C

ISO Quality, Price & Availability / Two Compounds • 14 Sizes • 10 Colors Standard Master Flash ®

®

EPDM 70 hour @ 500 pphm

RED SILICONE 70 hour @ 500 pphm

ADVANCED OZONE RESISTANCE tested to...

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent Continuous

+135°C (+275°F) +100°C (+212°F)

+260°C (+500°F) +225°C (+437°F)

– 55°C (-67°F)

– 74°C (-101°F)

LOW TEMPERATURE RESISTANCE tested to... COMPRESSION SET Maximum...

25%

50%

*Complete specification data and testing methods are available upon request.

Design Excellence Aztec’s flexible design meets all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion contraction. The soft aluminum base easily conforms to most metal roof profiles. Weather Protection

Made of EPDM or Red Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. Base Flexibility The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

®

Easy On-Site Customization Fast, one piece construction allows for easy on-site installation in usually 5 Minutes.

Pipe Range: 1/16” (1.6mm) • Overall Height: 3/4” (19mm) • Base: 2-1/4” (57mm) • Ten color options available Standard Mini Master Flash ® smallest flashing available! Specifically Designed For Solar & Electrical Applications

Master Flash ® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and Mechanical Officials (for the Uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with type “B” vents. Listed with IAPMO certification No. 3121

Pipe Size Compound Part No.

Flashing Details

®

A

SQ051GA SQ051BA SQ051RA SQ101GA SQ101BA SQ101RA SQ201GA SQ201BA SQ201RA SQ301GA SQ301BA SQ301RA SQ401GA SQ401BA SQ401RA SQ501GA SQ501BA SQ501RA SQ601GA SQ601BA SQ601RA SQ701GA SQ701BA SQ701RA SQ801GA SQ801BA SQ802RA FF851BC FF851GC FF852RC

Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone

A-Top opening

Closed

1/8”– 3/4” (3 mm - 19mm)

Mini

B-Cut to suit pipe size

1/8” – 3/4” (3-19mm) 2 - 1/4” (57mm) Closed 1/4” – 2-3/4” (6 - 70mm) 4-1/2” (114mm) 7/8” (22mm) 7/8” - 4” (22 - 101mm) 6” (152mm) Closed 1/4” – 5-3/4” (6 - 146mm) 8” (203mm) 2-1/4” (57mm) 2-3/4”– 7” (70 - 177mm) 10” (254mm) 3-1/2 (89mm) 4” – 8-1/4” (101 - 209mm) 11” (279mm) 3-3/4” (95mm) 4-3/4” – 10” (121 - 254mm) 12” (304mm) 4-3/4” (120mm) 5-1/2” – 11-1/2” (140 - 292mm) 14” (355mm) 5-1/2” (140mm) 6-3/4” – 13-1/2” (171 - 343mm) 17” (431mm) Closed Closed 0” - 15” (0-381mm) 19-1/2” (495mm) 6” (152mm) 8” – 20-1/2” (203 - 520mm) 25” (635mm) Closed 0” - 28-1/2” (0 - 724mm) 34” (863mm) 10-1/4” (260mm) 12” - 28-1/2” (304 - 724mm) 34” (863mm) 8” (203mm) 9-1/2” – 20-1/2” (241 - 520mm) 25” (635mm)

B

C-Base

C

A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base A-Top opening B-Cut to suit pipe size C-Base

A

1/4”- 2-3/4” (6 - 70mm)

#1

B

BROWN

C

A

7/8”- 4” (22 - 101mm)

#2

B

C

A

BLACK

1/4” - 5-3/4” (6 - 146mm)

#3

B

C

A

2-3/4” - 7” (70 - 177mm)

#4

B

GREY

C

A

4” - 8-1/4” (101 - 209mm)

#5

B

WHITE

C

A

4-3/4” - 10” (121 - 254mm)

#6

B

C

DARK GREEN

A

5-1/2” - 11-1/2” (140 - 292mm)

#7

B

C

A

6-3/4” - 13-1/2” (171 - 343mm)

#8

LIGHT GREEN

B

C

#8X FIX A FLASH

Closed Top 0” - 15” (0-381mm)

DARK BLUE

SQ901GA SQ901BA SQ902RA

A

#9 9-1/2” - 20-1/2” (241 - 520mm)

B

C

LIGHT BLUE

A

8” - 20-1/2” (203 - 520mm)

#9X

Black EPDM

SQ901BX

B

C

Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone

SQ951GA-C SQ951BA-C SQ952RA-C

A

BRIGHT RED

0” - 28-1/2” (0 - 724mm)

Maxi Closed

B

C

SQ951GA SQ951BA SQ952RA

A

Maxi Open 12” - 28-1/2” (304 - 724mm)

TERRA COTTA

B

C

Large Hole Small Pipe? Aztec has the answer… Specifically designed for theMetal Roofing Industry Fix-A-Flash Master Flash ®

Large Base Dimension The base is designed for a oversized hole cut for your pipe flashing

Fix-A-Flash Closed Top Black EPDM FF851BC Grey EPDM FF851GC Red Silicone FF852RC Pipe Size Compound Part No.

Flashing Details

A

A-Top opening

Closed

B

B-Cut to suit pipe size

0” - 15” (0-381mm) 19-1/2” (495mm)

C-Base

C

Extreme Angle Master Flash ® Specifically designed for Metal Roofing Industry,

®

The built in 40º degree pitch Allows to handle any extreme roof pitch (35º - 65º), sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. Easy on-site customization accommodates all normal installations.

A

Pipe Size Compound Part No.

Flashing Details

A-Top opening

Closed

B

Extreme Angle

Black EPDM EA101BA

1/4” - 5-3/4” (6 - 146mm)

B-Cut to suit pipe size

1/4” – 5-3/4” (6 - 146mm)

Grey Silicone EA102GX

C

C-Base

11” (279mm)

Multi-Flash Master Flash ® “Two Flashings In One”

®

No hassle stainless steel gripper to secure retrofit applications

Pipe Size

Compound Part No.

A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions Flashing Details

A

RETROFIT 2” - 4-1/2” (50 - 114mm) RETROFIT 1/2”- 3-1/2” (12 - 89mm) RETROFIT 2-1/4” - 6-1/2” (57 - 165mm)

STANDARD

7/8” (22mm) 2-3/4” (70mm) 6” (152mm) Closed 3” (76mm) 8” (203mm) 2-3/4” (70mm) 4-3/4” (120mm) 10” (254mm)

Black EPDM Grey Silicone Black EPDM Grey Silicone Black EPDM Grey Silicone Black EPDM Grey Silicone Black EPDM Grey Silicone Black EPDM Grey Silicone Black EPDM Grey Silicone Black EPDM Grey Silicone Black EPDM Grey Silicone

MF201BA MF202GX MF301BA MF302GX MF401BA MF402GX MF501BA MF502GX MF601BA MF602GX MF701BA MF702GX MF801BA MF802GX MF901BA MF902GX MF951BA MF952GX

7/8”- 4” (22 - 101mm)

B

#2

C A

STANDARD 1/4” - 5-3/4” (6 - 146mm)

#3

B

C A

STANDARD

2-3/4” - 7” (70 - 177mm)

#4

B

C A

4” (101mm) 4” (101mm) 11” (279mm)

STANDARD

RETROFIT 3-1/2” - 6-3/4”

#5

4” - 8-1/4”

B

(101 - 209mm)

(90 - 171mm)

C A

4-3/4” (121mm) 4-1/2” (114mm) 12” (304mm) 5-1/2” (140mm) 5-1/2” (140mm) 14” (355mm)

RETROFIT

STANDARD 4-3/4” - 10” (121 - 254mm) STANDARD 5-1/2” - 11-1/2” (140 - 292mm) STANDARD 6-3/4” - 13-1/2” (171 - 343mm)

B

#6

4-1/4” - 9-1/2” (108 - 241mm)

C A

RETROFIT 5” - 11” (127 - 279mm) RETROFIT 6-1/2” - 12” (165 - 304mm) RETROFIT 9” - 20” (228 - 508mm) RETROFIT 13” - 27” (330 - 685mm)

#7

B

C A

A-Top opening diameter

6-3/4” (171mm)

#8

B

B-Overall height

5-3/4” (146mm)

C A

C-Base dimensions

17” (431mm)

A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions

9-1/2” (241mm) 5-3/4” (146mm) 25” (635mm) 12” (304mm) 7-1/2” (190mm) 34” (863mm)

STANDARD 9-1/2” - 20-1/2” (241 - 520mm)

#9

B

C A

STANDARD 12” - 28-1/2” (305 - 724mm)

Maxi

B

C

Multi-Port Master Flash ® Two Applications • One Design • Multiple Functions

Four (4) 1/4” (6mm) or 3/8” (9.6mm) lines One (1) pipe 1/4”- 2-3/4” (6 - 70mm)

®

No hassle stainless steel gripper to secure retrofit applications

Two (2) cables or Wires per side“up to Four (4) total”

Part No. MP101BA-G

Pipe Range STANDARD 1/4"-2-3/4" (6 - 70mm) RETROFIT 1-1/4"-2-1/4" (25 - 57mm)

Compound

Flashing Details

A

A-Top Opening

Closed

Black EPDM

B

Multi-Port

B-Overall Height

4-1/2” (114mm) 2-1/4” (57mm)

Grey Silicone

MP102GX-G

C

C-Base

Weather Protection Made of EPDM or Grey Silicone, Adaptable Base The base is designed to mold to most panel configurations and roof pitches regardless of pipe location. These flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. “2 Port Design” Handling Many Jobs Mini-Port Master Flash ®

®

Center Port: 0” - 1-15/16” (0 - 49mm) pipe / cable Side Port: 3/8” (9.6mm) pipe / cable

Part No. MP051BA

Compound Black EPDM

Flashing Details

Pipe Range One center port for 0”- 13/16” (0 - 20 mm) pipe/cable One port up to 1/4 - 3/8” (6 - 9mm) pipe /cable

A

A-Top Opening

Closed

B

Mini Port

Grey Silicone MP052GX Grey EPDM MP051GA

C-Base B-Cut to suit pipe size

3” (76mm) 0” - 13/16 (0 - 20mm)

C

Standard Retrofit Master Flash ®

Weather Resistance Designed to withstand the damaging effects of ultra violet light and ozone.

Base Flexibility Designed to conform to most panel configurations and roof pitches regardless of pipe location.

®

#2 Retrofit Master Flash ®

Easily Installed plastic fastener snaps included

Silicone Retrofit Master Flash ®

Easily Installed Aluminum fastener snaps included

Modification Made Simple Easy to see pipe diameters make for painless on-site customization.

PIPE SIZE COMPOUND PART NO

FLASHING DETAIL

A

Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone

RF101BP RF101GP RF102RS RF201BP RF201GP RF202RS RF301BP RF301GP RF302RS

A–Top opening

1/2” (12mm)

B

1/2” - 4” (12 - 101mm)

#1

1/2” - 4” (12 -101mm) 8-3/16” (205mm)

B–Cut to suit pipe size C–Base

C

A

A–Top opening

4” (101mm)

B

4” - 9-1/4” (101 - 235mm)

#2

4” - 9-1/4” (101 - 235mm) 14-1/4” (362mm)

B–Cut to suit pipe size

C

C–Base

A

A–Top opening

9-1/4” (235mm)

B

9-1/4” - 16-1/4” (235 - 412mm)

#3

9-1/4” - 16-1/4” ( 235 - 412mm) 21-1/2” (546mm)

B–Cut to suit pipe size C–Base

C

2

4

3

5

1

6

Apply silicone sealant between base, roof, and to the top of flashing

Use fasteners to complete sealing. For UPC installation, fastener spacing may not exceed 1-1/2” (38mm)

Install supplied cable tie at uppermost part of Retrofit and apply sealant to any gaps.

Choose appropriate Retrofit. If necessary trim opening to pipe diameter.

Wrap Retrofit around pipe and install all snap rivets to seal flange

Press Master Flash ® down, bending it to conform to roof profile or roof irregularities. A blunt tool will help press flashing into tight roof angles.

Solar-Multi-Port-CT Master Flash ® No Fasteners Required! Just WeatherMaster™ Sealant 5 Port Design for the Clay Tile Roofs

One Center Port: 0” - 1-15/16” (0 - 49mm) Pipe Two Side Ports: 3/8” (9.6mm) pipe / cable Two Ports: 3/4” (20mm) pipe / cable Base : 4-1/2” (114mm) Four ports for cables or Wires per flashing to accommodate Copper pipe and electrical cabling

Part No.

Pipe Range One center port 0” - 1-15/16” (0 - 49mm) Pipe

Compound

Flashing Details

A

SMP-CT101TC SMP-CT101BA SMP-CT102RA Terra Cotta Black EPDM Red Silicone * Other colors are available

A-Top Opening B-Overall Height

Closed

Solar Multi-Port CT

B

Two ports up to 3/8” (9mm) pipe / cable Two ports up to 3/4” (20mm) pipe / cable

2-1/2” (63mm)

C-Base

4-1/2” (114mm)

C

Solar-Multi-Port-MR Master Flash ® Specially Designed for the Metal Roofing Industry

®

One Center Port: 0” - 1-15/16” (0 - 49mm) Pipe Two Side Ports: 3/8” (9.6mm) pipe / cable Two Ports: 3/4” (20mm) pipe / cable Base : 4-1/2” (114mm)

Four ports for cables or Wires per flashing to accommodate Copper pipe and electrical cabling

Part No.

Pipe Range One center port 0” - 1-15/16” (0 - 49mm) Pipe

Compound

Flashing Details

A

SMP-MR101BA SMP-MR102GX Black EPDM Grey Silicone * Other colors are available

Closed

A-Top Opening B-Overall Height

Solar Multi-Port MR

B

Two ports up to 3/8” (9mm) pipe / cable Two ports up to 3/4” (20mm) pipe / cable

2-1/2” (63mm)

4-1/2” (114mm) C-Base Diameter

C

Square Vent Master Flash ® Designed for square vent applications

Design Excellence Specially designed for square vent applications, sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction.

®

Made for Weather Resistance Made to withstand the damaging effects of ultraviolet light and ozone.

Pipe Size

Compound Part No.

Flashing Details A-Top opening diameter B-Cut to suit pipe size C-Base dimensions A-Top opening diameter B-Cut to suit pipe size

A

2-1/2” (63mm)

B

#1

2-1/2”- 4” (63 - 101mm)

Black EPDM

RF101BP-SQ

2-1/2” to 4” (63-101mm) 8” (203mm)

C

A

2-1/4” (57mm)

#2

2-1/4”- 5” (57 - 127mm)

B

2-1/4” to 5” (57-127mm)

Black EPDM

RF201BP-SQ

15-3/4” (400mm)

C-Base dimensions

C

Multi-Flash Square Vent Master Flash ® One Design “Two Flashings”

Designed with a lip to secure plastic zip tie for retrofit applications

Specially Designed for Square Pipes 3/4”- 5” (20 -125mm)

No hassle stainless steel gripper and plastic zip tie to secure retrofit applications

Part No.

A

Pipe Range STANDARD 3/4"-5" (20 - 125mm) RETROFIT 1-1/2"-4" (38 - 101mm)

Compound

Flashing Details

A-Top Opening

Closed

Black EPDM

MFSQ101BA

#1 Multi-Flash Square Vent

B

B-Overall Height

3-3/4” (95.mm)

Red Silicone

MFSQ102RA

C-Base

8” (203mm)

C

ISO Quality, Price & Availability / Two Compounds / 9 Sizes / 12 Colors All Around Performance Universal Master Flash ®

EPDM 70 hour @ 500 pphm

RED & GREY SILICONE 70 hour @ 500 pphm

ADVANCED OZONE RESISTANCE tested to...

Red Silicone

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent Continuous

+135°C (+275°F) +100°C (+212°F)

+260°C (+500°F) +225°C (+437°F)

– 55°C (-67°F)

– 74°C (-101°F)

LOW TEMPERATURE RESISTANCE tested to... COMPRESSION SET Maximum...

25%

50%

*Complete specification data and testing methods are available upon request.

Ozone and UV Protection Flashings are made of EPDM and Silicone, and are designed for maximum resistance to all weather conditions. On-Site Customization Pipe diameters can be seen clearly for proper fitting. Adaptable Base

Black EPDM

Grey Silicone

The base is designed to mold to most panel configurations and roof pitches regardless of pipe location.

Light Grey EPDM

All Around Design Excellence This universal flashing has been designed to fit virtually all panel configurations. Sleeve flexibility absorbs vibration and pipe movement caused by expansion/contraction. Easy on-site customization can accommodate all normal installations.

Dark Grey EPDM

®

Universal Master Flash ®

BROWN

®

Sizing Chart Check diameter of pipe. Select the appropriate Universal Master Flash ® for pipe or duct diameter. Only use maximum pipe diameters on minimal roof angles. For extreme pitch or surface irregularity select next larger size. Then refer to the part number for the Universal Master Flash ® desired.

BLACK

Now Available Universal Mini Master Flash ®

DARK GREY

Pipe Size Compound Part No.

Flashing Details A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter

A

Closed 3-1/4" (82mm) 4-3/4" (120mm) 1-1/4” (31mm) 4" (101mm) 6-1/4" (158mm) Closed 1-1/2” (38mm) 4” (101mm)

Black EPDM Grey EPDM Red Silicone RD901GG Dark Grey EPDM RD901NG RD901BE RD902RG Grey Silicone RD902GX RD801GG Dark Grey EPDM RD801NG RD801BE RD802RG Grey Silicone RD802GX RD701GG Dark Grey EPDM RD701NG RD701BE RD702RG Grey Silicone RD702GX RD601GG Dark Grey EPDM RD601NG RD601BE RD602RG Grey Silicone RD602GX RD501GG Dark Grey EPDM RD501NG RD501BE RD502RG Grey Silicone RD502GX RD401GG Dark Grey EPDM RD401NG RD401BE RD402RG Grey Silicone RD402GX RD301GG Dark Grey EPDM RD301NG RD301BE RD302RG Grey Silicone RD302GX RD201GG Dark Grey EPDM RD201NG RD201BE RD202RG Grey Silicone RD202GX RD101GG Dark Grey EPDM RD101NG RD101BE RD102RG Grey Silicone RD102GX Black EPDM Grey EPDM RD051NG RD051BE Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone

B

Closed”– 3/4” (Closed - 19mm)

Mini

C

LIGHT GREY

A

#1

1/4”- 2-1/2” (6 - 63mm)

B

C

A

WHITE

#2

1-3/4”- 3” (44 - 76mm)

B-Overall height C-Base dimensions

B

C

A

Closed

A-Top opening diameter

#3

1/4” - 5” (6 - 127mm)

4" (101mm) 7-3/4" (196mm)

B-Overall height C-Base dimensions

B

DARK GREEN

C

2-1/4" (57mm)

A-Top opening diameter

A

#4

3” - 6-1/4” (76 - 158mm)

4-3/4" (120mm)

B-Overall height

B

C

LIGHT GREEN

9-1/4" (234mm) 3-1/2” (88mm) 4-1/4" (107mm) 10-1/2" (266mm)

C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions A-Top opening diameter B-Overall height C-Base dimensions

A

#5

4-1/4” - 7-3/4” (107 - 196mm)

B

C

DARK BLUE

5" (127mm) 6" (152mm) 13" (330mm)

A

#6

5” - 9” (127 - 228mm)

B

C

5-1/2" (139mm) 5-1/2" (139mm) 14-1/2" (368mm) 6" (152mm) 6" (152mm) 16-1/2" (412mm) 7-3/4" (196mm) 9" (228mm) 25 -1/4" (641mm)

A

#7

6” - 11” (152 - 279mm)

LIGHT BLUE

B

C

A

#8

7” - 13” (177 - 330mm)

B

BRIGHT RED

C

A

#9

9” - 19” (228 - 482mm)

B

C

TERRA COTTA

Solar Flash Master Flash ® Specifically designed for solar applications

ISO Quality, Price & Availability / Two Compounds

EPDM 70 hour @ 500 pphm

RED & Grey SILICONE 70 hour @ 500 pphm

ADVANCED OZONE RESISTANCE tested to...

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent Continuous

+135°C (+275°F) +100°C (+212°F)

+260°C (+500°F) +225°C (+437°F)

– 55°C (-67°F)

– 74°C (-101°F)

LOW TEMPERATURE RESISTANCE tested to... COMPRESSION SET Maximum...

25%

50%

*Complete specification data and testing methods are available upon request.

The pitch canal allows for maximum flexibility, easily accommodating up to a 60º degree pitch without affecting performance.

The simple round base flashing is available in EPDM and silicone with a pre-cut hole for pipe sizes 3/4” to 1” (19 - 25mm) allowing for minimal on-site preparation and assembly. The pitch canal allows for maximum

flexibility, easily accommodating up to a 60º degree pitch without affecting performance.

The Adaptable Base is designed to mold to most panel configurations and roof pitches regardless of pipe location.

Compound Black EPDM Red Silicone Part No. SF101BA SF102RA Grey Silicone SF102GX

Pipe Range

Flashing Details

A

.60” (15mm) A-Top Opening Diameter

B

3/4” - 1” (19 - 25mm)

Solar-Flash

C-Base Diameter B-Overall Height

2-1/2" (63mm) 4” (101mm)

C

ISO Quality, Price & Availability / Two Compounds • Three Sizes Universal Retrofit Master Flash ®

EPDM 70 hour @ 500 pphm

RED & GREY SILICONE 70 hour @ 500 pphm

ADVANCED OZONE RESISTANCE tested to...

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent Continuous

+135°C (+275°F) +100°C (+212°F)

+260°C (+500°F) +225°C (+437°F)

®

– 55°C (-67°F)

– 74°C (-101°F)

LOW TEMPERATURE RESISTANCE tested to... COMPRESSION SET Maximum...

25%

50%

*Complete specification data and testing methods are available upon request.

Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

Easy On-Site Customization Fast, one piece construction allows for easy on-site installation in usually 5 minutes. Base Flexibility The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

Pipe Size Compound Part No.

Flashing Details

RF101BS-RD RF101GS-RD Black EPDM Grey EPDM RF101NG-RD Dark Grey EPDM

A-Top opening diameter

3/4”(19mm)

A

#1

3/4”- 2-3/4” (19 - 70mm)

B

B-Cut to suit pipe size

3/4” - 2-3/4” (19 - 69mm)

Grey Silicone Red Silicone

RF102GX-RD RF102RS-RD RF201BS-RD RF201GS-RD RF202GX-RD RF202RS-RD RF301BS-RD RF301GS-RD

C

C-Base dimensions

6 - 1/4” (158mm)

Black EPDM Grey EPDM RF201NG-RD Dark Grey EPDM

A-Top opening diameter

2” (50mm)

A

#2

2”- 7-1/4” (50 - 184mm)

B

B-Cut to suit pipe size

2”- 7-1/4” (50 - 184mm)

Grey Silicone Red Silicone

C

C-Base dimensions

10-3/4” (273mm)

Black EPDM Grey EPDM RF301NG-RD Dark Grey EPDM

A-Top opening diameter

3-1/4 (50mm)

A

#3

3-1/4” - 10” (95 - 254mm)

B

B-Cut to suit pipe size

3-1/4” - 10” (95 - 254mm)

Grey Silicone Red Silicone

RF302GX-RD RF302RS-RD

C-Base dimensions

14-1/2” (368mm)

C

Step 1: For retrofit installation, cut center rubber at base of the stainless joiner and pull apart.

Wrap Retrofit around pipe, join the interlocking teeth starting from the top and proceeding down.

Squeeze Gripper tightly with pliers to crimp, start at the top and work down to the base.

Apply sealant to the underside of the base. Shape Retrofit to roof by pressing the aluminum base to the roof contours.

Using tin snips, cut the flashing to fit pipe, starting opposite the Gripper

Apply additional sealant to Gripper joiner seam and to all areas that could be a potential leak risk.

Fasten Retrofit to roof using self- drilling screws, leave no gaps between base and the roof contours.

Electrical Mast Connection Master Flash ® Specifically designed for the Residential Roofing Industry,

No hassle stainless steel gripper to secure retrofit application

®

The built in 20° pitch allows adaptability to almost any roof pitch including 45°

Flashing Details Electrical Mast Connection

Black EPDM Red Silicone Grey Silicone Compound Part No. EMC101BS EMC102RS EMC102GX

Pipe Range: 0” – 5-3/8” (0 - 136mm) Base: 15” (381mm)

Box Gutter Expansion Joint Master Flash ®

9” wide Grey EPDM linear flashing Flexible metal sides Available in 3’, 12’ and 33’ lengths

Applications: Transition Walls • Parapet Walls Stepped Roofs • Corrugated Metal Roofs Roof Penetrations • Expansion Joint • Skylights

.059 thick .032 Aluminum edge

(SLF) Stretchable Linear Flash Master Flash ® Roof Flashing System Stretch and Seal

11” (280mm) wide • 1.7mm thick Grey EPDM linear flashing • Available in 3’, 12’ and 33’ lengths Applications: Transition Walls • Parapet Walls • Stepped Roofs • Skylights • Corrugated Metal Roofs • Roof Penetrations Square Vents • Large Pipes

Residential Master Flash ® “Environmentally safe” lead free aluminum base.

ISO Quality, Price & Availability / Two Compounds • 4 Sizes

Residential Master Flash ® Installation Video

EPDM 70 hour @ 500 pphm

GREY SILICONE 70 hour @ 500 pphm

ADVANCED OZONE RESISTANCE tested to...

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent Continuous

+135°C (+275°F) +100°C (+212°F)

+260°C (+500°F) +225°C (+437°F)

– 55°C (-67°F)

– 74°C (-101°F)

LOW TEMPERATURE RESISTANCE tested to... COMPRESSION SET Maximum...

®

25%

50%

*Complete specification data and testing methods are available upon request.

The addition of fire retarding agents milled directly into the rubber compound creates a self extinguishing feature which enables it to be used with type “B” vents. Listed with IAPMO certification No.3121 A “C20” ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a 20 year life. The built in 20° pitch allows adaptability to almost any roof pitch including 45°

The pull tab design and easy smooth tear grooving is intended to eliminate razor knives and allow for a circular hole

Accommodate flues & vents from 1/4” diameter through 18” diameter

Pipe Size Compound Part No.

Flashing Details A-Top opening B-Pull to suit pipe size C-Base A-Top opening B-Pull to suit pipe size C-Base A-Top opening B-Pull to suit pipe size C-Base A-Top opening B-Pull to suit pipe size C-Base

RS201BA RS201GA RS202RA RS101BA RS101GA RS102RA Black EPDM Grey EPDM Red Silicone RS102GX Grey Silicone Black EPDM Grey EPDM Red Silicone RS202GX Grey Silicone RS301BA RS301GA RS302RA Grey Silicone RS302GX Black EPDM Grey EPDM Red Silicone RS052GX Grey Silicone Black EPDM Grey EPDM Red Silicone RS051BA RS051GA RS052RA

A

Closed 1/4” - 3” (6 - 76mm)

B

1/4”- 3” (6 - 76mm)

MINI

16” X 19-1/4” (410 X 490mm)

C

A

2-1/2” (63mm)

3”- 8” (76 - 203mm)

#1

B

3” - 8” (76 - 203mm) 20” X 24” (508 X 609mm)

C

A

5-5/8”(142mm)

#2

8”- 11” (203- 279mm)

8” - 11”( 203 - 279mm) 26” X 30” (660 X 762mm )

B

C

A

8-3/4” (222mm)

#3

11” - 18” (279 - 457mm)

11” - 18” (279 - 457mm) 35” X 35” (889 X 889mm)

B

C

Installation Video www.youtube.com/watch?v=QB0E9mC4rb4

A “C20” ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a 20 year life. Weather Protection Made of EPDM or Red Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. Res-Lead Master Flash ® Protective Coated Safe Lead Two Compounds / 4 Sizes

Self extinguishing feature enables use with type “B” vents

The built in 20º pitch allows adaptability to almost any roof pitch including 45º Clay Tiles

“ENVIRONMENTALLY SAFE” Protective coated Safe-Lead metal base.

Res-Lead Master Flash ® Rubber & Base Colors… EPDM rubber is available in black and red silicone *Custom colors are available upon request. white, grey, black, light and dark green, light and dark blue, terra cotta (red clay appearance) and bright red, an additional cost may apply. Base coloring options are available an additional cost may apply.

Pipe Size Compound Part No.

Flashing Details

RL201BA RL201GA RL202RA RL101BA RL101GA RL102RA RL301BA RL301GA RL302RA RL051BA RL051GA RL052RA

Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone

A

A-Top opening diameter

Closed

B

1/4”- 3” (6 - 76mm)

MINI

B-Pull to suit pipe size

1/4” - 3” (6 - 76mm)

C

16” x 19-1/4” (410 x 490mm)

C-Base dimensions

A

A-Top opening diameter

2-1/2” (63mm)

3”- 8” (76 - 203mm)

#1

B-Pull to suit pipe size

3” - 8” (76 - 203mm)

B

C-Base dimensions

20” x 24” (508 x 609mm)

C

A

A-Top opening diameter

5-5/8” (142mm)

8”- 11” (203- 279mm)

#2

B

8” - 11”( 203 - 279mm)

B-Pull to suit pipe size

C-Base dimensions A-Top opening diameter

26” x 30” (660 x 762mm )

C

A

8-3/4” (222mm)

11” - 18” (279 - 45 mm)

#3

B-Pull to suit pipe size

11” - 18” (279 - 457mm)

B

C-Base dimensions

35” x 35” (889 x 889mm)

C

Middy-Multi Port Master Flash ® One Design - Handling Many Jobs Multiple Functions

®

Center pipe range: 0” - 2” - (0 - 50mm) Side pipe /cable range 3/8” (9.6mm) Base: 3-3/4” (95mm)

Part No. SQ081BA

Pipe Range One center port for 0”- 2” (0 - 50mm) pipe/cable One port up to 1/8 - 3/8” (3mm-9mm) pipe /cable

Compound Black EPDM

Flashing Details

A

A-Top Opening

Closed

Middy Multi Port

B

Grey EPDM SQ081GA

B-Overall Height

2” (50mm)

C-Base

3-3/4” (95mm)

Red Silicone

SQ082RA

C

Master Cap Master Flash ® Standing Seam Roof End Cap Flashing ISO Quality, Price & Availability

EPDM 70 hour @ 500 pphm

ADVANCED OZONE RESISTANCE tested to...

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent Continuous

+135°C (+275°F) +100°C (+212°F) – 55°C (-67°F) 25%

LOW TEMPERATURE RESISTANCE tested to... COMPRESSION SET Maximum...

*Complete specification data and testing methods are available upon request.

APPLICATIONS: Skylights • Metal Curbs • Ridge Applications • Job site Retrofit

Flexibility • Flexible width allows for most panel configurations • Expansion feature accommodates all seam heights Base Features • Allows side wall of end cap to form on roof panels • Base allows application at both terminating points of the sheeting or roofing material

Mini Vertical AluminumMaster Flash ®

Two Compounds EPDM / Red Silicone

ONE Center Port: 0” - 13/16” (0 - 20mm) pipe / cable ONE Port 1/4“ - 3/8” (6 - 9mm) pipe / cable

Aluminum Base:17-3/4” x 24” (450 x 600mm)

2 Ports for cables or wires to accommodate copper pipes and electrical cabling Part Numbers: Black EPDM / VA051BA • Red Silicone / VA502RA

Solar Multi-Port-AL Master Flash ® “Environmentally safe” lead free aluminum base”

One Center Port: 0” - 1-15/16” (0 - 49mm) Two Side Ports: 3/8” (9.6mm) pipe / cable Two Ports: 3/4” (20mm) pipe / cable Aluminum Base: 17-3/4” x 24” (450 x 600mm) Two Compounds EPDM / Red Silicone 4 Ports for cables or wires to accommodate copper pipes and electrical cabling

Part Numbers: Black EPDM / SMP-RS101BA • Red Silicone / SMP-RS102RA

Solar Multi-Port-LD Master Flash ® “Powder coated Safe-Lead metal base.”

One Center Port: 0” - 1-15/16” (0 - 49mm) Two Side Ports: 3/8” (9.6mm) pipe / cable Two Ports: 3/4” (20mm) pipe / cable Lead Base: 16” x 19-1/4” (410 x 490mm) Two Compounds EPDM / Red Silicone 4 Ports for cables or wires to accommodate copper pipes and electrical cabling

Part Numbers: Black EPDM / SMP-RL101BA • Red Silicone / SMP-RL102RA

YEAR WARRANTY 35

As part of a standard classification system for rubber products these general specifications present conservative engineering minimums which should be used for design criteria. General Recommendations Must be tested for extreme applications

EPDMMaster Flash ® EngineeringSpecifications

SILICONE Master Flash ® EngineeringSpecifications

ASTM D2000 M3 BA510 A14 B13 C12 F17 Z1 Z2 Z3 Z4 Z5 Z6 Z7

ASTM D2000 M4 GE 505 A19 B37 C12 F19 G11 Z1 Z2 Z3 Z4

GRADE 3 TYPE B CLASS A

GRADE 4 TYPE G CLASS E

GENERAL TEST TEMP 100C VOLUME SWELL NO REQ 50 DUROMETER (RANGE)

GENERAL TEST TEMP 225C VOLUME SWELL MAX 80% 50 DUROMETER (RANGE) TENSILE 5 MPa (MINIMUM 725 PSI)

5

5

10

05

TENSILE 10 MPa (APPROX 1450 PSI)

A14 B13

A19

HEAT AGING 70 hrs @ 100C

HEAT AGING 70 hrs @ 225C CHANGE IN HARDNESS MAX + 10 pts CHANGE IN TENSILE MAX -30% CHANGE IN ULTIMATE ELONGATION MAX -30% COMPRESSION SET 22 hrs @ 175C MAX 50% ASTM D395B OZONE RESISTANCE 70 hrs @ 50pphm PASS ASTM D1171 LOW TEMPERATURE BRITTLENESS 3 min @ -40C PASS ASTM D2137 A, 9. 3. 2 TEAR RESISTANCE, ASTM D-624, DIE “B” 55 DUROMETER (SPECIFIC TARGET) SILICONE (SPECIFIC ELASTOMER) HORIZONTAL FLAME RESISTANCE, UL 94 NOT TO EXCEED 3” / min OZONE RESISTANCE ADVANCED REQUIREMENT 70 hrs @ 500 pphm @ 100F

COMPRESSION SET 22 hrs @ 70C MAX 25% ASTM D395B OZONE RESISTANCE 70 hrs @ 50pphm ASTM D1171 100% QUALITY RETENTION LOW TEMPERATURE BRITTLENESS 3 min @ -40C PASS ASTM D2137 A, 9.3.2 55 DUROMETER (SPECIFIC TARGET)

C12

B37

F17

C12

Z1 Z2 Z3

F19

EPDM (SPECIFIC ELASTOMER)

G11

HORIZONTAL FLAME RESISTANCE, UL 94 NOT TO EXCEED 3” / min OZONE RESISTANCE ADVANCED REQUIREMENT 70 hrs @ 500 pphm @ 100F ACCELERATED WEATHERING RESISTANCE (U.V. LIGHT), ASTM G-53 TEAR RESISTANCE, ASTM D-624, DIE “C”

Z1 Z2 Z3

Z4

Z5

Z4

Z6 Z7

RESISTANCE TO DISCOLORATION, ASTM D-1148 (GREY ONLY)

The “Z” Parameters are proprietary standards adopted by Aztec Washer to more clearly indicate the type of material and its superior performance characteristics as related to the typical pipe flashing environment. NOTE: the additional of “Z3” to assure compliance with international building codes and “Z4” which clearly exceeds the performance required by the industry standard, “C12”. The Master Flash pipe flashing enjoys the only listing granted to date by the International Association of Plumbing and Mechanical Officials and carries the U.P.C. (Uniform Plumbing Code) seal.

1967, Aztec Washer Company started in Southern California with only a few local distributors and several orders to fill. The ensuing 40 years saw the market for bonded washers’ dynamic growth and lead Aztec to a prominent position in this marketplace as well as the plumbing, heating, and solar industries, with the addition of our Master Flash ® product line. Today, Aztec’s international distributor network numbers in the thousands and continues to grow across the globe. Aztec has its corporate headquarters in Poway, California with additional operations in the United Kingdom, Germany, Poland, Mexico and now Australia.

Hank De Graan, President and CEO of Aztec Washer Company

The flexibility and response to individual requirements has brought forth a close working relationship with our distributors and O.E.M. customers alike. A fully staffed, state of the art laboratory enables Aztec to develop and evaluate specific polymers to address the individual requirements of our customers. The addition of an in-house marketing department provides an extremely beneficial working relationship with our distributors. A relationship where Aztec is able to contribute to their success and we jointly prosper by this symbiotic relationship. We are a proud company. Proud of our achievements in this difficult world, proud of our relationship with our customers, proud of the products that our customers helped us to develop. But mostly proud that so many of you have chosen Aztec as your supplier. We look forward to the enjoyment of working with our current clients and eagerly await the challenge that the future and our new customers will bring.

Very Best Regards, President and CEO

Business Conserving

is good for Environment and the

Aztec Washer Company Our Green Statement / Policy

O n a sales trip in early 2007, a very sharp man asked how the "Green Movement" had influenced our company. Although we are a family oriented company that has always been socially and environmentally conscious, I have never been asked that question before and it prompted the following statement. Throughout the years, Aztec Washer Company has continued to research and implement new policies to conserve and protect our natural resources and reduce energy consumption wherever possible. This policy is applied to our manufacturing process as well as our general use. We are proud to say that we recycle all of our scrap materials from the production process throughout packaging and shipping. Aztec also designed and produced the very first and only bonded washer/screw head powder paint and assembly machine in use today. With the removal of harmful VOC's no longer a concern for Aztec , we chose to make this revolutionary paint line available to the rest of the world. Aztec will continue to pursue new avenues for protecting the world's resources. In pursuit of those efforts, we have employed the services of an Energy Curtailment Specialist to advise new and innovative ways we can reduce energy and preserve our environment.

Respectfully Yours,

COO

Other Quality Aztec products

Master Seal ® Bonded Washers

P36 Saddle Washers Patent Pending

INTERNATIONAL HEADQUARTERS

To see our complete product line go to: www.aztecwasher.com • Aztec Australasia 15 Mickle Street Dandenong South Victoria, 3175 • Tel: (+03) 9768 2394 Fax: (+03) 9768 2580 • e-mail: info@aztecau.com.au • web-site: www.aztecau.com.au • Aztec Mexico: Serv.y Maqs.Intls.SAdeCV. tel: (+52) 665 6542571 Fax: (+52) 665 6550796 e-mail: soto@smimx.net • web-site: www.aztecwasher.mx • Aztec Dichtscheiben Gmbh Lindenstrasse 11 D-57334 Bad Laasphe Germany Tel: (+49) 2752 1353 • Fax: (+49) 2752 1728 • Aztec International S.A. : ul. Bulgarska 63/65 60-320 Poznan, Poland Tel: (+48) 61 867 60 84 • Fax: (+48) 61 867 34 44 • e-mail: aztec@aztec-international.eu web-site: www.aztec-international.eu • Aztec (UK) LTD.: Unit 55, Enterprise Trading Estate Hurst Lane, Pedmore Brierley Hill, West Midlands DY5 1TX, United Kingdom • Tel: (+44) 1384 573444 • Fax: (+44) 1384 572029 e-mail: sales@aztec-midlands.co.uk • web-site: www.aztec-midlands.co.uk 13821 Danielson Street, Poway, CA 92064 • 1-800-WASHER 5 (927-4375) • Tel: 1-858-513-4350 Fax: 1-858-513-4305 • e-mail: info@aztecwasher.com • web-site: www.aztecwasher.com

YEAR WARRANTY 35

Master Flash®, Universal Master Flash®, Multi-Flash®, and Master Seal®, are trademarks of Aztec Washer Co., Inc. For technical support call:1-800-WASHER 5 (927-4375) (outside CA only) CA callers: (858) 513-4350

Made with