OSU Lab Furnishings Catalog

Fume Hood Accessories

Fittings for Fume Hood

These WaterSaver remote control fittings with needle valves consist of a brass angle valve with a replaceable seat, an epoxy coated brass nylon color-coded panel flange with angle serrated hose connector, a remote control rod assembly with a plastic flange and a tank nipple, locknut and wash. Fittings may be used on either side of hood. Fixtures shipped loose for installation at the job site by mechanical trades.

Cat. No.

Type

Air (Orange)

06000596

Gas (Dark Blue)

06000597

Nitrogen (Brown)

06000598

Vacuum (Yellow)

06000599

Cold Water Fitting with Vacuum Breaker for Fume Hood These WaterSaver remote control fittings with needle valves consist of a brass angle valve with a replaceable seat, and epoxy coated brass nylon color-coded panel flange with a gooseneck with a vacuum breaker, a remote control rod assembly with a plastic flange and a tank nipple, locknut and washer. Fixtures shipped loose for installation at the job site by mechanical trades. Cold Water Fitting without Vacuum Breaker for Fume Hood These WaterSaver remote control fittings with needle valves consist of a brass angle valve with a replaceable seat, and epoxy coated brass nylon color-coded panel flange with a gooseneck without a vacuum breaker, a remote control rod assembly with a plastic flange and a tank nipple, locknut and washer. Fixtures shipped loose for installation at the job site by mechanical trades. Type Cold Water with Vacuum Breaker

Cat. No.

06000600

Cat. No.

Type

Cold Water without Vacuum Breaker

06000601

79

Made with FlippingBook Learn more on our blog