Transmission Products (T-1201)
Hardware Fittings— Forged Steel Hot Line Extension Links
FORGED STEEL H/F
Extension links are forged from high-strength steel and contain no welded joints. Because of the variety of fittings and lengths, links are made only to order. Please specify by catalog number and length required.
Material: Body – galvanized steel
Product Data
Approx Packed Weight (1) Per 100 Minimum Length lb (kg)
Available Range of Lengths
Ultimate Strength lb (kN)
Shape And Orientation Of Ends
Catalog Number
Figure Number
Identification
Minimum Inches (mm)
Maximum Inches (mm)
HOO30L HOOT30L HOO40L HOOT40L HOO50L HOOT50L HOO80L HOOT80L FHCE30L
30,000 (133) 40,000 (178) 60,000 (267)
12 (304.8) 12 (304.8) 13 (330.2) 14 (355.6) 11 (279.4) 11 (279.4) 11 (279.4) 12 (304.8) 11 (279.4) 12 (304.8) 11 (279.4) 14 (355.6) 11 (279.4) 11 (279.4) 11 (279.4) 11 (279.4) 10 (254)
144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658)
383 (174) 383 (174) 536 (243) 616 (279) 366 (166) 369 (167) 294 (133) 372 (169) 357 (162) 527 (239) 451 (205) 451 (205) 272 (123) 342 (155) 442 (200) 323 (147) 430 (195)
1
2
Chain Eye/Chain Eye
3
LINE AND TOWER HARDWARE PRODUCTS 80,000 (356) Clevis Eye 30,000 (133) Y-Clevis Eye 30,000 (133) Chain Eye/Eye 30,000 (133) Clevis/Clevis 30,000 (133) Chain Eye/Clevis 30,000 (133) 50,000 (222) Chain Eye/Y-Clevis 30,000 (133) 50,000 (222) Clevis/Ball 30,000 (133) Y-Clevis/Ball 30,000 (133) 50,000 (222) Chain Eye/Ball 30,000 (133) 50,000 (222)
4
5 & 9
FHCE30L90 FHYCE30L FHYCE30L90
7 & 9
FOPE30L
2 & 9
FOPE30L90
FHCC30L
5
FHCC30L90 FHOEC30L FHOEC30L90 FHOEC50L FHOEC50L90 HYCOE30L HYCOE30L90 HYCOE50L HYCOE50L90
2 & 5
3 & 6
2 & 7
3 & 8
HBC30L
5 & 10
HYBC30L
7 & 10
HYBC50L
8 & 11
HOEB30L
1 & 10
HOEB50L
3 & 11
NOTE: Link length available 1"increments. Use letter “D” to represent decimal point in catalog number when applicable. Example: HOO3020D5 for 201" length. Normal manufacturing tolerances: Up to 50" – ±0.5 inch. Above 50" – ±1%. (1) For links longer than minimum length, add to packed weight per 100 pieces, 28 pounds per inch for number HOO80L and HOOT80L. All others, add 17 pounds per inch. Refer to next page for dimensions.
Page 190 | July 2016
Made with FlippingBook - Online magazine maker