Mitsubishi PLK-E1010 Instruction Manual

(6) Press the key, then work holder moves to home position. (7) Press key on the operation panel. Then presser foot goes down automatically, and wind mode window will be appeared. (8) Step on the black color foot switch (NO.7) again to make work holder down. (9) Step on the gray color start foot switch (NO.9). The thread is kept winding to the bobbin (NO.5) while the gray color start switch is stepping on. (10)When the bobbin becomes full of the thread, the adjust lever (NO.6) is returned to the original position. (11) Stop to step the gray foot switch and press the key to exit winding mode, and

press the key, to back to the standard

operation windows will be appeared.

(12) To wind the bobbin thread during the sewing operation, carry out above (3) and (4) procedure then, the bobbin winding is performed automatically. (13) Regarding the adjustment for the bobbin thread winding volume, please refer to the instructions in the paragraph 7-11 Adjustment of the bobbin winder in the following page.

3

4

a

5

b

6

9

7

13

From the library of Superior Sewing Machine & Supply LLC • www.supsew.com