Mitsubishi PLK-E1010 Instruction Manual

7-19. Adjustment of the mechanical home position [NOTE] The mechanical home position is fixed at the center of the sewing area when the sewing machine is shipped from the factory. However, it can be moved within the area covered with diagonal lines.

[ Rear side ]

1

100

(1) Original home position (2) Adjustable

2

50

[ Front

side ]

10

50

100

(1) Turn the power switch ON and cancel the sewing area limit with the operation panel. For this cancellation, press key at the normal mode condition, then MENU MODE is appeared. Press key. And press [Area limit] button. Please select [Area limit control (ALC)]. If you select ALC=ON, area limit control is canceled. [NOTE] If do not cancel the sewing area

limit, shifting the mechanical home position make the effective sewing area narrower than the original.

(2) After the cancellation of the sewing area limit, once, turn the power switch OFF.

7-19-1. Shifting the mechanical home position to the X direction (1) Remove the X-Y cover (right), (left) and X cover.

(2) Loosen the detector plate fix screws (2 pieces) (No.1). If move the detector plate (No.2) to the right, the mechanical home position is shifted to the left and if it is moved to the left, the mechanical home position is shifted to the right.

― 32 ―

From the library of Superior Sewing Machine & Supply LLC • www.supsew.com