Hunkeler Digital Print Finishing Catalog for Screen

Special solutions Hunkeler’s finishing technology is designed as a modular system. From the individual modules, production lines can be configured to exactly match a specific need. The combination of the Hunkeler modules together with third-party systems make it possible to produce unique print products that stand out from the crowd.

Pharma/Special solutions

PEM

iPEM

Web‑Cleaning PEM The paper dedusting unit iPEM and PEM removes the paper dust which adheres to the paper web and would also cause issues for the follow-on machines and digital printer. The micro particles are removed con tact-free from the paperweb and are then collected in the exhaust air bin. The sharp air jet removes the dust from the surface like a planer. The paper web is cleaned on both sides in one process. The integra ted iPEM is available as an option on the Unwinder UW8 and on the Media Changer RX8, the stand-alone PEM is available as an option on the Roll Splicer RS8.

Paper waste extraction systems

Compact suction unit with high suction power The HKU 1250 compact suction unit can be used for small dust quantities as well as for the suction of remaliner punching (confetti). The mobile suction and filter unit is characterized by high suction power, high efficiency, low energy demand and low operating noise. Ideal waste extraction unit for the Hunkeler Dynamic Processor DP8 with file hole punching and the Punch and Perf Module PP6. Compact suction unit, mobile with integrated filter device The HKU 2000-N nonstop is equipped with a chopper for the extraction of paper waste chip outs and endless strips. All machines are compact, mobile, and operate entirely in a negative pressure mode for extraction and filtration. The dust-laden air is filtered, then clean air is retur ned to the production room; dust and paper cuts-offs fall into the large volume container below the suction unit. To keep the production machines running non-stop, the HKU is equipped with a slider system-, which allows the full material container to be emptied during operation. Connection to a central extraction system The central extraction system collects the production waste material directly from the Hunkeler finishing modules. As an option, the endless edge strips can be perfectly cut by a shredder for transport in the piping system. The shredder is equipped with a communication interface for connecting the central extraction system and the Hunkeler production line. This allows process steps to be automated and reduces dust pollution.

Further information for central extraction systems: hunkelersysteme.com

21