AZN-Catalog2014

THE PRO'S ADVICE

MAKE YOUR SPANNERWORK HARDER

COMBINATION SPANNERS

The open-ended jaws of a spanner are for use where access is restricted or when fasteners are in line as in pipework. Use the ring-end of a spanner for initial loosening and final tightening, where access is available, because it offers maximum strength and grip to reduce the risk of damage to the nut.

NEVER USE EXCESSIVE FORCE

When freeing a ‘frozen’ or ‘rusted on’ nut never use a hammer or extend the length of the spanner by using a piece of pipe; you will damage both the spanner and the fastener, instead use a lubricating oil.

PULL TOWARDS YOU WHEREVER POSSIBLE

Whether tightening or freeing off a fastening you can apply more power and control by pulling the spanner toward you and if it accidentally slipped off the nut there is less risk of injury.

ADJUSTABLE WRENCHES

For best performance from an adjustable wrench avoid selecting an oversized wrench for the fastener. Close the jaws of the wrench onto the flats of the nut and then gently move the wrench forward and back at the same time further tightening the adjusting knurled wheel until the fit to the nut is without movement; this will minimise damage to the fastener. Always rotate so that the force is directed toward the fixed jaw.

SAFETY

• Never use a hammer for additional leverage • Don’t use open-ended spanners or adjustable wrenches to free off a ‘frozen’ nut or to finally tighten a nut; use a ring spanner instead. • Keep spanners free from oil to prevent slippage

QUALITY

• Stanley sockets and spanners are manufactured from premium grade Chrome Vanadium steel • Manufactured to meet and exceed relevant international quality standards

165