Cisco IP 7960 Phone Help.fmb

Chapter 4 GettingStartedwith FeatureButtons

Using theServicesButton

Enter your user ID. To enter any letter on your LCD screen, use a corresponding number key. Press the key one or more times to display a particular letter. For example, press the 2 keyone time for “a,” twice quickly for “b,” and three times quickly for “c.”After you pause, the cursor automatically advances to allow you to enter the next letter. Press the << soft key if youmake amistake. After entering your user ID, use theNavigation button to scroll down to the PIN prompt. Enter your PIN and press the submit soft key. The Cisco IP Phone towhich you have logged in now adopts your user profile information, including your speed dials and established services. The phone also becomes associatedwith your phone number. • If you are logged out of a Cisco IP Phone that has Cisco Extension Mobility Service configured for it, youwill not be able tomake calls or check voicemail messages from that phone until you log in. If you can hear a busy signal after pressing theMessages button or any key on the touch tone key pad, then youmust log in before using the phone. • You cannot log in to a phone that is off the hook. • Extensionmobilitymight automatically logyouout after a certain amount of time. This time limit is established by your system administrator. • Ring type, contrast settings, and volume settings are not maintained by your ExtensionMobility profile; configure these settings directly on the Cisco IP Phone. Press the Exit soft key to return to the previous screen.

Step 3

Step 4

Step 5

Step 6

Tip

How toLogOut of ExtensionMobility

Whenyou are ready to logout of extensionmobility, press the Services buttonon your phone, then use the Navigation button to select the logout option for extensionmobility. Press the Select soft key. Press the Exit soft key to return to the previous screen.

Cisco IPPhone 7960 and 7940SeriesUser Guide

4-5

78-10182-07