WIRE PLANT SUPPORTS TOMATO TRANIERS ARE EX WORKS. A DELIVERY SURCHARGE MAY APPLY
NEW SPIRAL PLANT SUPPORT – TWIN PACK
Spiral Plant Support for use in pots or garden Starts as a flat pack but Expands to 150cm with provision for a bamboo cane to go through the centre and support spiral
12 Per Carton
900mm High Conical Support Frame. Made from 4mm powder coated Wire. Four Rings from 300mm Diameter at base decreasing to 100mm at top. Ideal for climbing plants such as clematis, Hoyas and jasmine
PLANT SUPPORT - STEEL FRAME & MESH
PLANT SUPPORT FRAME - 375mm DIA X 900mm GDS524 Green Colour, Plastic Coated Steel Frame which Wraps around and locks around the plant for full support. The wire supports can be installed before or after the plant is mature. The plant support wires can be stabilized by putting the legs into ground, at the same time, saving growing rooms for the flowers and plants. Single Item 934140008943 PLANT SUPPORT MESH – 375mm DIA X 900mm GDS525 Green Colour, Plastic Coated Steel Frame with Mesh Top. Three legs connect to the mesh, allowing you to place it directly at the top of the growing plants, or slightly above your flowers.
TOMATO TRANIERS ARE EX WORKS. A DELIVERY SURCHARGE MAY APPLY
1350mm High Inverted conical Support Frame. Made from 4mm Galvanised Wire.
Five Rings from 250, to, 450mm Diameter, Increase as the Plant Crown Spreads. Heavy Galvanised Wire Frame for Training Sprawling Plants as they Grow Upward. Tree Rings of Increasing Diameter give an Inverted Conical Shape. Ideal for Tomatoes, Peas and Beans.. Long Lasting and Strong, Use Year After Year.
20 per bundle
JUMBO TOMATO TRAINER
1850mm High Inverted conical Support Frame. Made from 5mm Galvanised Wire. Seven Rings from 250, to 550mm Diameter, Increase as the Plant Crown Spreads.