2018-Navigator-Owners-Manual

Lighting

The high beams turn off if: • The ambient light level is high enough that high beams are not required. • The system detects an approaching vehicle's headlamps or tail lamps. • The vehicle speed falls below approximately 27 mph (44 km/h). • The system detects severe rain, snow or fog. • The camera is blocked. Switching the System On and Off Switch the system on using the information display. See Information Displays (page 122).

Switch the lighting control to the autolamps position. See Autolamps (page 98). Overriding the System When you switch on the high beams, pushing or pulling the stalk provides a temporary override to low beam. Automatic High Beam Indicator (IfEquipped)

FRONT FOG LAMPS

The indicator lamp illuminates to confirm when the system is ready to assist.

E254003

Press to switch the fog lamps on or off. You can switch the fog lamps on when the lighting control is in any position except off and the high beams are not on. ADAPTIVE HEADLAMPS Note: There is a delay of two to five seconds before the system operates when you drive your vehicle. Note: The system is only active at speeds above 3 mph (5 km/h).

E142451

101

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201708, First Printing