2018-Navigator-Owners-Manual

Towing

Distance D The horizontal distance from the bumper to the center of the trailer axle (single axle trailers), or the center of the axles (trailers with dual axles or more). Step 5: Enter Measurements Using the Information Display Using the recorded measurements, enter the required data into the system. Follow the on screen prompts to enter each of the measurements taken in step 4. When all four distances have been entered, a confirmation display will appear. Check the values are correct before proceeding, or go back to change any if required. Step 6: Confirming the Sticker Location Check the Rear View Camera display to see if the sticker is identified by the system and marked with a red circle. Confirm that the red circle is correctly located over the sticker image in the display. The on screen prompt will ask you to confirm this.

Note: If the system cannot locate the sticker try cleaning the camera lens, and also make sure the sticker is within the green zone as indicated in step 3. Calibrating the System To complete setup, drive your vehicle straight forward between 4 mph (6 km/h) and 24 mph (39 km/h) following the on screen prompt. Note: Check your measurements to make sure you measured from the correct points. Note: If you move the steering wheel during this procedure, the calibration pauses. Note: We recommend that you do not do this at night. A message will be displayed during calibration and after calibration is complete. Using Pro Trailer Backup Assist To use the system press the button and select the required trailer from the display.

E246984

When the sticker is located, the display prompts you to shift into reverse (R). The system turns on.

303

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201708, First Printing