2018-Navigator-Owners-Manual

SYNC™ 3

To install the update in your vehicle, remove anything that is plugged in the USB ports on the media hub and plug in the USB drive containing the update. When the USB drive is plugged in, the installation should begin immediately. After a successful installation, the update is available the next time the vehicle is started. Please reference the website for any further actions. Updating Over Wi-Fi To update your System over Wi-Fi your vehicle must connected to a Wi-Fi access point. Data rates may apply.

To connect your system to Wi-Fi, select: Menu Item Settings Wi-Fi

If you would like to switch this feature on later, select: Menu Item

Settings General

Available Wi- Fi Networks

You can then select your Wi- Fi network. You may have to enter the security code if the network is secured. The system confirms when it has connected to the network.

Automatic System Updates

From this menu, you can enable automatic updates. If you have not done so already, the system prompts

you to set up a Wi-Fi connection when you enable this feature.

You must also give the system permission to update automatically. Upon vehicle delivery, the System asks you if you would like to use the automatic update feature. If you agree to automatic updates, you can press OK to confirm. If this selection does not appear upon vehicle delivery you can access it through the General Settings. See Settings (page 510). You can also perform a master reset. See SYNC™ 3 Troubleshooting (page 530).

When the system is connected via Wi-Fi and automatic updates are enabled, your system checks for software updates periodically. If a new version is available, it downloads at that time. Software downloads can take place for up to 30 minutes after you have switched your vehicle off. The updates do not interrupt the normal use of your SYNC 3 system. If a download does not complete for any reason,

460

Navigator (TB9) Canada/United States of America, enUSA, Edition date: 201708, First Printing