Cargo Securement Solutions

22

FLATBED PRODUCTS

Kinedyne Ratchet Straps are designed to handlemost types of flatbed tie‑down requirements. Kinedyne ratchet straps are designed to handle most types of flatbed tie-down requirements. Ratchet straps have a 18” fixed end as standard. Special length fixed ends are available as a special order. All ratchet straps are labeled to meet CVSA guidelines, CHP standards, North American Cargo Securement Standards, DOT regulations and WSTDA recommended standards. Alternate end hardware available, see Hardware Products. NOTE: Items listed with a “BX” suffix are available in special Ship & Display retail friendly master carton. See page 80 for details.

WARNING: Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in temperature range from +194 degrees F (+90°C) to -40 degrees F (-40°C).

Flat Hook

Chain Anchor

Wire Hook

RATChET STRApS 2” RATCHET STRAP WITH 802 STANDARD HANDLE

PRODUITS POUR REMORQUES À PLATEAU · PRODUCTOS PARA EQUIPOS ABIERTOS

532720 533020

27’ 30’

With 1015 Flat hooks & 2084FK Webbing Working Load Limit: 3,335 lbs./1513 kgs.

533039

30’

With 3705-2 Chain Anchors & 2084FK Webbing Working Load Limit: 3,335 lbs./1513 kgs.

533060

30’

With 1007 Wire hooks & 2084FK Webbing Working Load Limit: 1,670 lbs./757 kgs.

SEE WARnIngS on PAgE 9 • VoIR lES AVERtISSEMEntS En PAgE 10 • VÉASE l AS AdVERtEnCIAS En lA PÁgInA 11