Cargo Securement Solutions

57

KAPTIVE BEAM SYSTEMS

TRACK END CAPS FOR K1 TRACK The specially designed track end caps provide a closure point for the end of the track to captivate the beam. They also provide a finished appearance for the bottom end of the Kaptive Beam track.

SYSTÈMES KAPTIVE BEAM · SISTEMA DE BARRAS CAPTIVAS

2043 – Single Row End Cap Weight: .24 lbs./.11 kgs. 2044 – double Row End Cap Weight: . 54 lbs/.24 kgs. Kaptive Beam System Accessories RELEASE POLE WITH MOUNTING CLIPS

The new head design allows for rapid release of the beam pawl, and has a notched profile for a secure hold when stowing beams in an elevated position. It has a safe, non-slip vinyl grip and comes with mounting hardware for easy storage.

10022 Weight: 1.8 lbs./0.8 kgs.

NOTE: This pole can be used with all Kaptive Beam systems.

LOGISTIC STRAPS FOR K2 KAPTIVE BEAM SYSTEMS logistics straps are designed for use with K2 Kaptive Beam Systems and feature the 80040 Butterfly fitting which engages with standard K2 Kaptive Beam logistic track. 641692 2” logistic Strap x 16’ with 811 Ratchet Buckle and 80040 Butterfly Fittings Working Load Limit: 1,000 lbs./ 454 kgs.

651692 2” logistic Strap x 16’ with 910 Cam Buckle and 80040 Butterfly Fittings Working Load Limit: 835 lbs./ 380 kgs.

NOTE: See page 72 for specifications on 80040 K2 Track Butterfly Fitting.

Operating Instructions For K2 Logistic Straps

INSTRUCTION LABELS Self-adhesive labels detail operating instructions for Kaptive Beam systems can be permanently affixed to trailer wall. KB699 Label for K1 Original Kaptive Beam systems. L1KB699 Label for L1 Kaptive Beam systems. K2KB699 Label for K2 Kaptive Beam systems.

Step 1. Hold the fitting so the two front edges touch and spread the back edges apart in a ‘butterfly’ position. Step 2. Insert the front of the fittings into the track. Engage the left side first and then maneuver the right side into the opposite edge of the track. Step 3. Close the ‘butterfly’ so the front and back edges of the fitting are touching face to face. Step 4. Tension the strap to ensure both sides of the fitting are engaged with the strap.

1

2

3

4

SEE WARnIngS on PAgE 9 • VoIR lES AVERtISSEMEntS En PAgE 10 • VÉASE l AS AdVERtEnCIAS En lA PÁgInA 11