Full Line Product Catalog

Fresh Air Blowers & Hoses

Fresh Air Blowers These high-quality blowers offer the versatility of either supplying continuous fresh air or providing ventilation to manholes and other confined areas. GMP offers either an electrically powered blower (70133), or a blower driven by a gasoline engine (70132). Electric Blower Especially designed for maximized air ventilation in nonexplosive and nonflammable confined space work environments by supplying continuous fresh air while removing toxic and noxious fumes from the area

U NDERGROUND P ULLING E QUIPMENT

It reliably serves the needs of construction crews as well as workers in utility trenches, vaults or tanks Power comes from a 120 Volt AC, 1/3 horsepower electric motor. Air flow is measured at 1250 CFM at the nozzle; 805 CFM with one 90˚ bend or 700 CFM with two 90˚ bends. The unit is equipped with a replaceable fuse system which protects components from damage P/N 70133 Dimensions: 18 in. (457 mm) High x 16 in. (406 mm) Wide x 18 in. (457 mm) Deep Weight: 49 lbs. (22 kgs)

Gasoline Powered Blower This unit offers the versatility of providing either fresh air supply or exhaust ventilation without relying on an electric power source Construction, utility and telephone crews can depend on its power and performance for removal of toxic and noxious gases and continuous fresh air

The unit is equipped with a 4-cycle, 3 horsepower Briggs & Stratton gasoline engine. Air flow is measured at 1350 CFM at the nozzle; 1050 CFM with one 90˚ bend or 775 CFM with two 90˚ bends. The frame and housing are constructed from heavy gauge sheet metal providing exceptional durability and resistance to damage

The heavy duty blower wheel is dynamically and balanced braze welded for durability Vibration mounts absorb shock and provide exceptional in-use stability P/N 70132 Dimensions: 18 in. (457 mm) High x 16 in. (406 mm) Wide x 20 in. (508 mm) Deep Weight: 53 lbs. (24 kgs) Note: Prior to using these blowers, Gas Detection Equipment and “Safety Practices for Vaults & Confined Spaces” must be followed. Consult with your OSP Engineer for further information. Also, recommended hose length not to exceed 25 ft. (731 cm) and minimum recommended hose diameter must be 8 in. (203 mm) for our blowers.

For Parts Sales and Technical Support 24-Hours Call 1-800-247-7747 Web: www.clblankenship.com