Full Line Product Catalog

Test & Measurement Line Accessories

Line Splitter • Assists in measuring the current draw of a connected load up to 15A without splitting the load's power cord. • Voltmeter input jacks. • Provides X10 mode and X1 mode. • Designed for use with Klein Tools Test & Measurement Line (CL100, CL200, CL1000, CL1200, CL1300, CL2000, CL2200, CL2300, CL2500, CL3200). • Works with many other manufacturers' clamp meters. WARNINGS: • Do NOT use with loads greater than 15A. • Risk of electric shock and burn. Contact with live circuits could result in death or serious injury. • Do not use if line splitter appears damaged. If in doubt, replace line splitter. Do NOT use line splitter if wet. For indoors use only.

Cat. No.

Overall Length Width

Weight

69400

6.2" (157 mm)

2.2" (558 mm)

3.9 oz. (110.6 g) w/ batteries

69400

Carrying Case • Constructed of 600 Denier nylon with a heavy-duty PVC zipper and zinc alloy zipper tag. • Convenient storage for most Klein test and measurement products.

Magnetic Hanger • For use with multimeters MM1000, MM1300, MM2000, MM2300, MM5000 and MM6000. • Clips securely into back of rubber boot. • Strong magnet attaches securely to metal surfaces for hands-free use.

Electrical Test & Measurement

CL200

AUTO

A

AC

69190

69401

Cat. No.

Description

Weight

Cat. No. Overall Size Weight 69401 3-1/2" (89 mm) W x 9-1/2" (235 mm) H x 2 (50 mm)" D 2.5 oz. (70.9 g)

69190

magnetic hanger for electrician's multimeters

1.1 oz. (31.2 g)

All dimensions are in inches and (millimeters).

WARNINGS: To ensure safe operation and service of the tester, follow these instructions. Failure to observe these warnings can result in severe injury or death. • Before each use, verify meter operation by measuring a known voltage or current. • Never use the meter on a circuit with voltages that exceed the category based rating of this meter.

• Do not use the meter during electrical storms, or in wet weather. • Do not use the meter or test leads if they appear to be damaged. • Ensure meter leads are fully seated, and keep fingers away from the metal probe contacts when making measurements. • Do not open the meter to replace batteries while the probes are connected.

328

• Use caution when working with voltages above 60V DC, or 25V AC RMS. Such voltages pose a shock hazard. • To avoid false readings that can lead to electrical shock, replace batteries if a low battery indicator appears. • Unless measuring voltage or current, shut off and lock out power before measuring resistance or capacitance. • Always adhere to local and national safety codes. Use individual protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.

See end of section for important safety information regarding the test and measurement line.

All dimensions are in inches and (millimeters).

C.L. Blankenship, Inc. • 800-247-7747 • sales@clblankenship.com • www.clblankenship.com