Full Line Product Catalog

PANEL SPECIFICATIONS Material

6990-0027

Panel, Rack Manifold, Mounting Bracket This mounting bracket is used to secure the Part No. 6538-0003 and 6538-0009 2 inch stainless steel manifolds to the central of

Cold Rolled Steel, 12 gauge

Dimensions

Standard: 23 in (58.4 cm) x either 7 in (17.8 cm) or 3.5 in (8.9 cm). Some mod els available in 13 in (33 cm) and 15 in (38.1 cm) widths. Most 7 in (17.8 cm) high panels are sup plied with 8 slots: 4 on each side. Top slots are 1 in (2.5 cm) apart; bottom slots are 0.5 in (1.3 cm) apart

fice equipment rack or other mounting surface. A minimum of two brackets is required for each

Mounting Slots

manifold installation.

6240-0121

Ball Valve, 3/4” NPT-F T-knob

9800-0142

Miscellaneous Products, Splice Case Check Valve Assembly

This kit includes the hard ware components required for connecting a length of 3/8” pressure tubing from an air pipe manifold to a splice case. It includes a branch tee with a 1/8”

NPT-M, a tank valve fitting, a check valve and a 3/8” tube connector . The check valve prevents air from bleeding out of the splice case if the pressure tubing be comes dislodged.

9800-5432

Panel, Miscellaneous, Balance Manifold This 20-inch long, six-inch diameter air dryer balance manifold has three inlet and three outlet shutoff valves, two of which are plugged,

and a 0-30 PSIG pressure gauge. It is designed to as sist in accurately balancing the pressure of two or more air dryers.

The words Flow Finders™, Flow Gauge Sampler™, Flow Gauge™, Return Pipe Panels™, Positive Air Flow System™, High Resolution Pressure Flow and Dual Transducers™, Transducer Gauge Panel™, 289H LSS™, Power Pipe™, Power Pipe Panel™, Power Return Panel™, and Power Pipe Sys tem™ are trademarks of System Studies Incorporated.

E4

(187117.NHD) For Parts Sales and Technical Support 24-Hours Call 1-800-247-7747 Web: www.clblankenship.com