Morrisville UDO - June 2017 version

Article 3: Zoning Districts Section 3.5. Town Center Districts 3.5.6. Residential Transition (RT) District

Max. Net Density (du/ac) Max. Lot Coverage (%)

8.0 65

n/a

n/a

8.0 70

8.0 50

n/a

10.0

75

85

65

n/a

Setbacks

Alley- loaded

B 1

10 [2]

n/a

8 [5]

10 [2]

n/a

n/a

n/a

Min. Front (ft)

B 2

Other

20 [3]

10 [6]

8 [5]

20 [3]

25 [3]

30 [3]

n/a

C

Min. Side (ft)

5 [4]

0 [4]

0 [4]

0

15

10 [4]

n/a

D Min. Corner Side (ft)

same as minimum front 10 [6]

same as minimum front

n/a

Alley- loaded

E 1

6

n/a

6

6

n/a

n/a

n/a

Min. Rear (ft)

E 2

Other

15

20 [6]

20

15

15

15

n/a

Building Standards F

Max. Structure Height (ft)

35

35

35

35

35

35

n/a

Min. Building Separation (ft)

G

n/a

8

8

20

n/a

n/a

n/a

Notes: sf = square feet; ft = feet; du = dwelling unit; ac = acre; % = percent; n/a = not applicable

[1] Available only in a Conditional-Residential Transition District approved with the provision of compensating public benefits (see Section 3.1.4). [2] Setbacks also apply to residential developments with detached front-loaded garages located to the rear of the principal structure. [3] For infill development, see Section 11.4.2.B, Reduction of Minimum Front Setbacks to Block Face Average. [4] A minimum of 15 feet is required along lot lines shared with lots containing single-family detached residential uses built before 2010. [5] The front setback is measured from the common open space. [6] For single family detached dwellings located in a bungalow court, the front setback is measured from the public street fronting the development or from the lot line adjacent to the shared driveway for the lots not fronting a public street. (Ord. No. 2014-022, 06/24/2014; Ord. No. 2016-001, 05/10/2016)

Morrisville, NC

June 23, 2017

Unified Development Ordinance

Page 3-43