CATALOG 53

WORKHOLDING - TORX KEYS

Kant Twist Clamp

Wiha Torx Wrenches

Steel Hand Vise

Great for holding small objects when polishing. Spring action in handle keep jaws open. 1-1/4" wide serrated jaws open to 7/16". Overall length is 3-3/4". CAT.# DESCRIPTION PRICE GN815 Hand Vise 33.45

Precision wing style torx wrenches, designed for long life. CAT.# DESCRIPTION PRICE FX105 T5 Torx Wrench 4.95 FX106 T6 Torx Wrench 4.95 FX107 T7 Torx Wrench 4.95 FX108 T8 Torx Wrench 4.95 FX109 T9 Torx Wrench 4.95 FX110 T10 Torx Wrench 4.95

These clamps are a must when gluing handles or soldering guards or bolsters to your blade. The round handle on the Kant Twist clamps provide the ability to finely adjust the clamp pressure to your project and makes it easy to position your work. Clamps are small and light weight. The free-floating jaws adjust to unparallel surfaces, will not walk or twist when pressure is applied. Outside measurements and nominal clamping pressure of each clamp is as follows: CL400 is 1 3/8" x 1 1/2" 200 lbs.; CL401 is 1 3/4" x 2" 350 lbs.; CL403 is 3" x 3 3/16" 600 lbs.; CL405 is 3 1/4 x 3 1/2" 800 lbs. The clamp opening determines the thickest material you can clamp, the clamp depth is the maximum distance you can clamp from the edge. CAT.# OPENING DEPTH PRICE CL400 3/4" 3/8" 11.95 CL401 1" 1/2" 12.95 CL403 1 1/2" 1 1/8" 13.95 CL405 2" 1 1/8" 16.95 Smooth section on handle allows vise to be held in machine chucks or collets. Handle has hole through entire length to accommodate stock up to the full size capacity so that long rods can be gripped close to the end. End of handle is knurled and has a smaller diameter than chuck which allows fast opening and closing and rapid rotation between the thumb and finger when filing or forming small work. Both vises have heavy nickel plated finish. Made in the USA. CAT.# RANGE, ENGLISH RANGE, METRIC PRICE ST240A 0 to .055" 0 to 1.4 mm 19.99 ST240C .045 to .135" 1.2 to 3.4 mm 2 5.99 Pin Vises

Fully Adjustable!

Knifemaker’s Contour Vise

Hex Keys & Torx Set

Torx Set of 6

HK120 CAT.#

SIZE

PRICE

Designed and built by an engraver and knifemaker. In just seconds you can hold knives securely for engraving and other detail work with this wonderful vise. Special chain-like linear jaws conform to unusual and compound shapes with ease. Lined with a special hard rubber ribbon, these jaws grip securely without high clamping force. The Knifemaker’s Contour Vise is totally adjustable for a wide range of widths and depths of knives. It mounts in any vise including all known engraving blocks. If you work on knives, get one…it’s a well-made bargain. CAT.# DESCRIPTION PRICE PV622 Contour Vise 89.95

T6,T7,T8,T9,T10,T15

4.95

Hex Keys

CAT.# HK102 HK103 HK104 HK105 HK106 HK107 HK108 HK109 HK110

SIZE .035 .050 1/16" 5/64" 3/32" 7/64" 9/64" 5/32" 1/8"

PRICE

.50 .50 .50 .50 .50 .50 .50 .50 .50

4 -in- 1 Mini Screwdriver

Double End Pin Vise

Our 4-in-1 Mini Screwdriver has two double- ended blades great for working with miniature Slotted and Phillips fasteners. Blades: 1/16” and 1/8” Slotted, #00 and #1 Phillips. CAT.# DESCRIPTION PRICE GN744 4-in-1 Mini Screwdriver 2.95

Use to hold small pins, rods, wire, drills, taps, and other small tools. Nickel plated body made of tubing, permits use of long wire or rods. Each end has a double end collet that may be reversed to desired size. 3 3/4” length, 5/16” diameter. CAT.# CAPACITY PRICE GN90 .0 to .125” .0 to 3.2 mm 14.95

Surgical Tubing

Gunsmith Screwdrivers

Adjustable Pin Vise

Designed especially with the gunsmith in mind. Red plastic handles, hollow ground blades for scope sight and mount screws, plug screws, side plate screws, guard screws, and general purpose gun work. 8 pc. set includes the FP1, FP2, FP3, FP4, FP5, FP14, FP15, FP16 in a roll-up compartmented storage case.

Pure Gum Surgical Latex tubing makes the perfect clamping system for the custom knifemaker. The tighter you stretch it, the more gripping power it has. Use the 1/4" OD tubing for general use and the 5/16" OD when maximum clamping power is needed. Reusable , will not break or deform under normal conditions. Ideal for irregular shapes and repairing cracks and checks in wood handles. Apply epoxy and wrap the tubing around the knife pulling the wood back together. Tubing will hold tight while curing. After curing, remove the tubing and refinish the handle. Epoxy simply peels away, as it will not adhere to the tubing. Sold in two pieces equalling 10ft. length. The shortest piece will be at least 2ft in length.

Holds small drills, burrs, wires, files, reamers and other small tools, 0 to 1/4". Three jaw hardened steel keyless chuck, sturdy plastic handle. CAT.# CAPACITY PRICE GN93 .0 to 1/4" .0 to 6.3 mm 13.95

CAT.# FP8A

DESCRIPTION Forster 8 pc. set

PRICE

42.95

Slide Lock Tweezers

Grace Screwdrivers

Eight accurately hollow-ground screwdrivers for take-down of many guns. Fit sight screws, guard screws, floor plate, etc. Nicely finished, spring steel blade in hardwood handle.

A tool you can’t do without. For inspection or holding parts. Slide lock holds parts firmly. CAT.# POINT STYLE LENGTH PRICE GN401L Serrated 5 3/4" 6.99

OD

ID

CAT.# SC702 SC802

TUBING TUBING PRICE

CAT.#

DESCRIPTION 8 pc General Set

PRICE

8.95 9.95

1/4"

3/16" 3/16"

5/16"

GPHG8

36.95

PAGE 88

PRICES SUBJECT TO CHANGEWITHOUT NOTICE