TPT March 2012

26-30 March 2012

› › ›

mains. Bison is able to work on internal diameters ranging from 2 to about 32mm. The Bison W/D (wet and dry) variant allows the programming of a sequence of firing several bullets, and is able to shoot both dry and liquid-soaked projectiles. For example, a dry projectile can be used to remove dirt, followed by a projectile soaked in liquid degreaser, then a dry projectile to dry the residue of the product. The range of projectiles covers various uses: (C) Coupling can handle diameter variations, and is particularly suitable for pipes with fittings, with diameters greater than 50mm. (PR) Product Recovery is able to handle large diameter variations, and is also suitable for pipes with fittings. (GR) Grinding is coated with aluminium oxide, and is very abrasive, for removing smooth patina. (A) Abrasive, with a flexible abrasive head, is suitable for removing slippery dirt or slightly exposed margins. (S) Standard is a very hard projectile with great mechanical side strength for various uses.

Email: info@alka-srl.com Website: www.alka-srl.com

Atomat SpA Italy

5G32 ATOMAT, established in 1968 and consistently grown over the years, is an experienced and consolidated manufacturer of rolls for welded tubes. Its strong economic and financial stability, achieved thanks to a wise expansion policy, allowed the company not only to overcome the general market dip of recent years, but also to maintain its development through continuous investments in advanced technology. Within the group, the competition posed by emerging producers has been regarded as a challenge and not as a threat.

Atomat has invested in advanced technology

150

www.read-tpt.com

M ARCH 2012