TPT March 2012

26-30 March 2012

The stationary pipe bevelling machine bevels the welding seam preparation (I, Y and X-profile) in a copying process or with integrated NC valve plate to the pipe ends. The machine is designed to process pipes with a wall thickness up to 100mm and an outer diameter from 10" to 120". Special welding seam profiles are possible under consideration of the pipe ovality. MFL carbide tipped cold circular sawing machines are divided into single cut and layer sawing machines, and are used for the exact cutting of seamless pipes and steel billets. The company’s edge milling machines are designed for the welding seam preparation of all kinds of chamfers on longitudinal and spiral welded pipes. Edge milling machines are used for the edge preparation of strips and plates (large diameter pipes, wind power industry) and divided into table and pull-through edge milling machines. Welding seam processing machines remove the welding seam scarf of longitudinal welded and spiral pipes, using a milling process at the inner and outer side simultaneously over a length of 400mm within a guaranteed quality range

(base material +0.1mm). The machines are designed for a pipe outer diameter of 10" to 200". Fax: +43 3612 270 830 Email: saegen.fraesen@mfl.at Website: www.mfl.at 12E17 OCN SpA has been manufacturing equipment for the ferrous and non-ferrous industries since 1977 in the North Eastern part of Italy in Tavagnacco. Thanks to the wealth of experience and know-how acquired throughout the decades, a highly motivated and specialised team of 60 employees and a workshop of more than 10,000m², OCN has been designing, manufacturing and commissioning state-of- the-art, custom finishing lines that process bars, coils, tubes and pipes of copper, brass, bronze, aluminium and steel. OCN has developed an in-line straightness control system for bars, pipes OCN SpA Italy

and tubes. The main advantages of this system are: High processing speed with over 30 pieces/minute regardless of pipe/tube length. Fully automatic station capable of separating the bent pipes from the straight ones and conveying them back to the straightening machine feeding system. The automation of the system can be connected to the straightening machine control for an immediate alarm and tuning of the rolls set-up. Fully static system with no moving parts. This drastically reduces the required maintenance and operation costs. Easy installation in existing lines thanks to the minimal space required for operation. The OCN stacking system processes bars and pipes to form round, square and hexagon bundles and can serve different types of finishing lines for bars and pipes thanks to the high productivity of the system. Given layer transfer time is always inferior to that of layer formation, the productivity of this area comfortably adapts to the upstream feeding capacity.

› › ›

› › ›

VISIT US AT TUBE 2012 26 TO 30 MARCH HALL 1 STAND 1B25

Where skill meets experience and quality means more than just the product – that’s when you know you’ve arrived at the world’s leading supplier of butt-weld fittings for the approved market. We look forward to seeing you! ernefittings.com

168

www.read-tpt.com

M ARCH 2012