HexArmor Gloves Size Chart and Glove Care

Glove Sizing Guide

6/XS 7-7.5” 18-19cm Measure Your Hand (Recommended) Using a string or measuring tape, measure the circumference around the knuckles, excluding the thumb. Your hand should be open with the fingers together. Compare this measurement to the chart on the right to determine your glove size. Or, Print the Chart Below to Help Measure Print the below glove chart at 100% size to assist with accurate measurement. Reducing or enlarging the printout will result in inaccurate measurements. Place your right hand on the glove chart so that the saddle of your thumb and index finger line up with the X. The measurement closest to the right edge of your hand will be the appropriate glove size. 5/XXS 5-6” 12-15cm 7/S 7.5-8” 19-20cm 8/M 8-8.5” 20-21.5cm ALIGN THUMB ALIGN INDEX FINGER Industrial gloves fit differently than most gloves, because of the materials used to provide protection. We recommend using our size charts and reviewing glove descriptions and materials, and if you are still uncertain about what size would best fit your hand, give us a call at 1-616-459-4144.

Hand Circumference

HexArmor ® Size

5 in. (12 cm) - 6 in. (15 cm) 7 in. (18 cm) - 7 1/2 in. (19 cm) 7 1/2 in. (19 cm) - 8 in. (20 cm) 8 in. (20 cm) - 8 1/2 in. (21 1/2 cm) 8 in. (21 1/2 cm) - 9 in. (23 cm) 9 in. (23 cm) - 10 in. (25 cm) 10 in. (25 cm) - 11 in. (28 cm) 11 in. (28 cm) - 12 in. (30 cm) 12/3XL 11-12” 28-30cm

5/XXS

6/XS 7/S 8/M

9/L

10/XL

9/L 8.5-9” 21.5-23cm

10/XL 9-10” 23-25cm

11/XXL 10-11” 25-28cm

11/XXL 12/3XL

5/XXS 6/XS 7/S 8/M 9/L 10/XL 11/XXL 12/3XL

Index Finger

Thumb

5/XXS

6/XS 7/S 8/M 9/L 10/XL 11/XXL 12/3XL

Chart Should Be 7 1/2 in. (19 cm)

Call 1-877-MY ARMOR or visit hexarmor.com

Glove Sizing Guide Industrial gloves fit differently than most gloves, because of the materials used to provide protection. We recommend using our size charts and reviewing glove descriptions and materials, and if you are still uncertain about what size would best fit your hand, give us a call at 1-616-459-4144. Measure Your Hand (Recommended) Using a string or measuring tape, measure the circumference around the knuckles, excluding the thumb. Your hand should be open with the fingers together. Compare this measurement to the chart on the right to determine your glove size.

Hand Circumference

HexArmor ® Size

5 in. (12 cm) - 6 in. (15 cm) 7 in. (18 cm) - 7 1/2 in. (19 cm) 7 1/2 in. (19 cm) - 8 in. (20 cm) 8 in. (20 cm) - 8 1/2 in. (21 1/2 cm) 8 in. (21 1/2 cm) - 9 in. (23 cm) 9 in. (23 cm) - 10 in. (25 cm) 10 in. (25 cm) - 11 in. (28 cm) 11 in. (28 cm) - 12 in. (30 cm)

5/XXS

6/XS 7/S 8/M

9/L

10/XL

11/XXL 12/3XL

Or, Print the Chart Below to Help Measure Print the below glove chart at 100% size to assist with accurate measurement. Reducing or enlarging the printout will result in inaccurate measurements. Place your right hand on the glove chart so that the saddle of your thumb and index finger line up with the X. The measurement closest to the right edge of your hand will be the appropriate glove size.

5/XXS

6/XS 7/S 8/M 9/L 10/XL 11/XXL 12/3XL

Index Finger

Thumb

Chart Should Be 7 1/2 in. (19 cm)

Call 1-877-MY ARMOR or visit hexarmor.com

Arm & Body Protection You may need to order one size larger when wearing arm guards over shirt sleeves, in which case we recommend measuring over your clothes. Having someone assist you will ensure accurate measurements. How to Measure • Neck: Measure the circumference where a standard button-down type collar would be fastened. • Bicep: Measure around the widest part, a few inches below the shoulder. • Chest: Measure the width at the fullest point, keeping the tape horizontal. • Sleeve length: Measure the distance from the prominent bone in the center on the back of the neck, across the shoulder, over the bent elbow, to the wrist bone.

Neck

Sleeve

Chest

Bicep

Wrist

Chaps

Gaiters

Product

6/XS

7/S

8/M

9/L

10/XL

11/XXL

12/3XL

Length 7.5” Wrist 8” Width 10” Length 9.5” Wrist 9” Width 13” Length 20.5” Wrist 8.25” Bicep 15.5” Length 16.75” Wrist 7” Bicep 14.75”

Length 7.75” Wrist 8” Width 10” Length 10.25” Wrist 10.25” Width 14.25” Length 21” Wrist 9” Bicep 16.5” Length 18” Wrist 8.5” Bicep 16.5” Inseam 22.5” Thigh 26” Ankle 24” Inseam 14” Calf 16” Ankle 16” Neck 16” Chest 22.5” Sleeve 23”

Length 8.5” Wrist 9” Width 11” Length 10.5” Wrist 11.5” Width 15” Length 21.75” Wrist 9.25” Bicep 18” Inseam 24.4” Thigh 26” Ankle 24” Inseam 15” Calf 18” Ankle 18” Neck 17” Chest 26.5” Sleeve 26” Length 19” Wrist 9.5” Bicep 19”

Length 9.25” Wrist 9.5” Width 12.5” Length 11” Wrist 14” Width 17” Length 22.5” Wrist 10.25” Bicep 18.5” Length 20” Wrist 10.75” Bicep 20.5” Inseam 26” Thigh 30” Ankle 26” Inseam 17” Calf 20” Ankle 20” Neck 18” Chest 26.5” Sleeve 26”

Length 10” Wrist 10” Width 14” Length 11” Wrist 14” Width 17.5” Length 23” Wrist 11.75” Bicep 23” Length 21” Wrist 12” Bicep 22” Inseam 28” Thigh 35” Ankle 30” Inseam 18” Calf 22” Ankle 22” Neck 19” Chest 28.75” Sleeve 28”

Length 10” Wrist 12.5” Width 16”

AG8TW n/a

AG10009S, AG10009V, and AG9X

Length 9.5” Wrist 8.5” Width 12.25” Length 19.25” Wrist 8” Bicep 15”

Length 12.25” Wrist 14.5” Width 18” Length 24.25” Wrist 12.25” Bicep 24.25”

AS019S

1010

n/a

n/a

Inseam 20” Thigh 26” Ankle 24” Inseam 13” Calf 14” Ankle 14” Neck 15” Chest 21” Sleeve 22”

Inseam 30” Thigh 38” Ankle 34” Inseam 18” Calf 24” Ankle 24” Neck 20” Chest 30” Sleeve 29.5”

Chaps

n/a

Gaiters

n/a

HexJacket

n/a

Call 1-877-MY ARMOR or visit hexarmor.com

How to Use Your YULEYS ®

1 PLACE: Place both YULEYS beside each other on the floor.

2 STEP IN: Step into them one at a time, toe first, pushing down on heel until firmly locked into place. Repeat for other foot. It’s that easy!

3 STEP OUT: To remove YULEYS step on opposite heeltab and lift foot out. Repeat on other foot. Convenient hands-free removal.

Just Your Size Universal sizing guidelines make it easy to find the YULEYS ® to fit your work boot or shoe. When trying to determine your YULEYS size, measure the sole of your footwear from heel to toe. When measured correctly, your YULEYS will fit snug.

Easy Cleaning and Care YULEYS ® are designed for today’s busy companies and workers: simply rinse them off when you’re done and let them air dry. YULEYS ® are launderable and can be sterilized with bleach. CE Pending

YULEYS ® Sizes

Work Boot/Shoe Sole Length

10 in. (25.5 cm) - 10 1/2 in. (26.7 cm)

A

10 1/2 in. (26.7 cm) - 11 in. (27.9 cm)

B

11 in. (27.9 cm) - 11 3/4 in. (29.8 cm)

C

11 3/4 in. (29.8 cm) - 12 5/16 in. (31.3 cm)

D

12 5/16 in. (31.3 cm) - 12 5/8 in. (32.0 cm)

E

12 5/8 in. (32.0 cm) - 12 15/16 in. (32.9 cm)

F

12 15/16 in. (32.9 cm) - 13 5/16 in. (33.8 cm)

G

13 5/16 in. (33.8 cm) - 13 3/4 in. (34.9 cm)

H

13 3/4 in. (34.9 cm) - 14 3/16 in. (36.0 cm)

I

*If the length falls in a range between two YULEYS sizes, select the smaller size.

Call 1-877-366-5436 or visit www.yuleys.com

www.hexarmor.com

Glove Care - Why Does It Matter? Improper glove care can shorten the life of your PPE. It can also lead to dermatitis, decreased dexterity, loss of protective abilities, and odor. Glove care refers not only to laundering but also proper storage, routine glove checks, and knowledge of materials and their particular strengths and weaknesses.

Cleaning + Care Most gloves and arm and body PPE are machine washable. Please see hexarmor.com for product specific washing instructions. Companies who properly launder their gloves can increase lifespan by up to 300% Laundering removes harmful chemicals, perspiration, and everyday grit and grime that can weaken protective fibers and seams. Our team of HexArmor ® solutions specialists are here to help you with this process, and they are more than happy to provide you with all the information you need.

Because there are so many different work gloves on the market, experienced safety managers should be aware of what workers’ gloves are made of and how they will stand up to the applications they’re being used for. Common glove materials include nylon, spandex, leather, cotton, SuperFabric ® *, Kevlar ® , and knit fibers. Each of these materials has a certain way it needs to be cared for. Often there is a blending of the materials, making proper care even more crucial. Proper storage Gloves should be stored in clean, dry conditions, away from direct sunlight and extreme temperatures. Routine glove checks Glove life varies depending on the application, environment, and amount of use. It is vital that you perform routine glove checks before beginning work every day. Take note of areas that have begun to wear down, such as loose Velcro ® or a worn-down name tag. If you see holes in the synthetic leather or TP-X ® material on the palm of your glove, this is an indication that its protective qualities may be compromised, putting you at risk of injury. Lingering moisture or a strong odor are also signs that your gloves may need to be replaced. Keeping an eye out for these issues (and others) takes you one step further from a worksite hand injury, which is the ultimate goal of hand protection.

Call 1-877-MY ARMOR or visit hexarmor.com

How-To : Donning and Doffing

Gloves are often designed with more than one layer of material. Using more than one layer allows us to provide a durable glove with additional properties such as cut and pucture resistance, thermal insulation, and water resistance. Working with customers, we have found that the donning and doffing techniques outlined here can increase the durability and longevity of work gloves. DONNING As shown in Figure 1 and 2, make sure all fingers are aligned and seated when putting on your gloves. Use one or both of these techniques to seat your gloves. DOFFING As shown in Figure 3, slightly bend the fingers of the hand from which you want to remove the glove, and grip the fingertips with your other hand. This will keep the layers seated inside the glove.

1

2

3

Call 1-877-MY ARMOR or visit hexarmor.com

How to Properly Care for Your Gloves HOW-TO: DONNING AND DOFFING Gloves are often designed with more than one layer of material. Using more than one layer allows us to provide a durable glove with additional properties such as cut and pucture resistance, thermal insulation, and water resistance.

1

Working with customers, we have found that the donning and doffing techniques outlined here can increase the durability and longevity of work gloves. DONNING As shown in Figure 1 and 2, make sure all fingers are aligned and seated when putting on your gloves. Use one or both of these techniques to seat your gloves. DOFFING As shown in Figure 3, slightly bend the fingers of the hand from which you want to remove the glove, and grip the fingertips with your other hand. This will keep the layers seated inside the glove.

2

3

CLEANING Option 1: You can simply wash these gloves in a standard commercial washing machine in warm or cold water. Dry on medium or cool setting. Option 2: Fill a 5 gallon bucket with warm water and two caps full of Simple Green ® . Dip and scrub gloves as desired and hang dry, or dry as suggested in Option 1.

Machine Wash

Hand Wash

Tumble Dry Low

Hang Dry (Indoors)

Note: Leather gloves are not washable, please check C&C tag for care instructions.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Glove Care By regularly washing your gloves, they can last up to 300% longer, and keep you and your crew safer. Check your tag for specific instructions. When working a job, you can easily wash your gloves on site:

Machine Wash Instructions: Machine wash cool

Do NOT bleach Tumble dry low Do NOT iron

Chrome Series ® 4026

Call 1-877-MY ARMOR or visit hexarmor.com

Replace Your Gloves We recommend that your HexArmor ® PPE be discarded immediately if visual signs of wear, such as holes and tears, are observed. Continuing to use a damaged glove can result in an injury.

Worn out Fingers and Forchettes

Abrasions, Wear and Tear on Palm

Loose or Damaged Impact Guards

Abrasions, Wear and Tear on Palm – with SuperFabric ®

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Glove Care When working a job, you can easily wash your gloves on site:

• Fill a 5 gallon bucket with warm water • Add cleaning solution, we recommend a natural product • Scrub until clean, rinse thoroughly • Hang dry or tumble dry low as indicated on the tag inside the cuff Note: Leather gloves are not washable. To remove excess oils, we recommend a clay-based rub such as Oil-Dri.

Call 1-877-MY ARMOR or visit hexarmor.com

Replace Your Gloves We recommend that your HexArmor ® PPE be discarded immediately if visual signs of wear, such as holes and tears, are observed. Continuing to use a damaged glove can result in an injury.

Abrasions, Wear and Tear on Palm

Worn out Fingers and Forchettes

Loose or Damaged Impact Guards

Call 1-877-MY ARMOR or visit hexarmor.com

Replace Your Gloves We recommend that your HexArmor ® PPE be discarded immediately if visual signs of wear, such as holes and tears, are observed. Continuing to use a damaged glove can result in an injury.

Worn out Fingers and Forchettes When holes have abraded through any of the glove materials, protection is sacrificed, and the hand becomes vulnerable to dirt and debris getting inside the glove.

Call 1-877-MY ARMOR or visit hexarmor.com

Replace Your Gloves We recommend that your HexArmor ® PPE be discarded immediately if visual signs of wear, such as holes and tears, are observed. Continuing to use a damaged glove can result in an injury.

Abrasions, Wear and Tear on Palm When the palm coating has abraded off of your gloves, the grip, and cut and puncture resistant qualities can be diminished.

Call 1-877-MY ARMOR or visit hexarmor.com

Replace Your Gloves We recommend that your HexArmor ® PPE be discarded immediately if visual signs of wear, such as holes and tears, are observed. Continuing to use a damaged glove can result in an injury.

Loose or Damaged Impact Guards Back-of-hand impact guards should not be pulling away or hanging off the glove. Impact guards that have become detached do not provide accurate protection, and can act as a catch hazard.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper 9000 Series ™ Glove Care By regularly washing your 9000 Series™ gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your 9000 Series™ gloves on site: WASHING INSTRUCTIONS: • Hand Wash Only Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Hang to dry (indoors), do not tumble dry. Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Chrome Series ® Glove Care By regularly washing your Chrome Series ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your Chrome Series ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures. LEATHER GLOVES: Hand Wash Only • Gentle hand wash with mild soap. Rinse thoroughly. Do not bleach. • Dry flat indoors. Do not tumble dry. Do not iron.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper EXT Rescue ® Glove Care By regularly washing your EXT Rescue ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your EXT Rescue ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper GGT5 ® Glove Care By regularly washing your GGT5 ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your GGT5 ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Leather Glove Care By regularly caring for your leather gloves, they can last up to 300% longer, and keep you and your crew safer. WASHING INSTRUCTIONS: • Hand Wash Only Gentle hand wash with mild soap. Rinse thoroughly. Do not bleach. DRYING INSTRUCTIONS: • Dry flat indoors. Do not tumble dry. Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Helix ® Glove Care By regularly washing your Helix ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your Helix ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Hang to dry (indoors), do not tumble dry. Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Hex1 ® Glove Care By regularly washing your Hex1 ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your Hex1 ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures. LEATHER GLOVES: Hand Wash Only • Gentle hand wash with mild soap. Rinse thoroughly. Do not bleach. • Dry flat indoors. Do not tumble dry. Do not iron.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Ugly Mudder ® Glove Care By regularly washing your Ugly Mudder ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your Ugly Mudder ® gloves on site: WASHING INSTRUCTIONS: • Hand Wash Only Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Hang to dry (indoors), do not tumble dry. Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper PointGuard ® Glove Care By regularly washing your PointGuard ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your PointGuard ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures. LEATHER GLOVES: Hand Wash Only • Gentle hand wash with mild soap. Rinse thoroughly. Do not bleach. • Dry flat indoors. Do not tumble dry. Do not iron.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Rig Lizard ® Glove Care By regularly washing your Rig Lizard ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your Rig Lizard ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

SEAMLESS COATED GLOVES: Do Not Tumble Dry • Hang to dry (indoors), do not tumble dry. Do not iron.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper ThornArmor ™ Glove Care By regularly washing your ThornArmor™ gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your ThornArmor™ gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper NXT ® Glove Care By regularly washing your NXT ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily sanitize your NXT ® gloves on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using hot water. • Option 2: Dishwasher NXT ® gloves can be sanitized in a commercial dishwasher. DRYING INSTRUCTIONS: • Hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Chrome SLT ® Glove Care By regularly washing your Chrome SLT ® gloves, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your Chrome SLT ® gloves on site: LEATHER GLOVES: Hand Wash Only • Gentle hand wash with mild soap. Rinse thoroughly. Do not bleach. • Dry flat indoors. Do not tumble dry. Do not iron. FABRIC GLOVES: • Option 1: Machine Wash Wash on a regular cycle using cool water. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper Arm & Body PPE Care By regularly washing your HexArmor ® Arm & Body PPE, they can last up to 300% longer, and keep you and your crew safer. When working a job, you can easily wash your Arm & Body PPE on site: WASHING INSTRUCTIONS: • Option 1: Machine Wash Wash on a regular cycle using cool water. We recommend that you turn the item inside out to minimize scratching the tub of the washer. Do not bleach. • Option 2: Hand Wash Hand wash using mild semi-diluted cleaner and scrub until clean. Rinse thoroughly. DRYING INSTRUCTIONS: • Tumble dry inside out on low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures

*We recommend washing HexArmor ® Arm & Body PPE in water that is 30° Celsius or less. However, they may be washed in water up to 140° Celsius without any significant decrease in longevity or performance of the product. As always, inspect your PPE on a regular basis.

Call 1-877-MY ARMOR or visit hexarmor.com

Chaps Care and Maintenance

HOW-TO: DONNING AND DOFFING HexArmor chaps are designed to be “fast donn” and “fast doff’ products. These easy to follow instructions will help extend the life and ensure maximum protection from your chaps. Chaps can be identified with a “left” or “right” tag on the inside of each leg. Each chap also has a reflective strip on the front of each leg to help identify left and right. If the chaps are put on with the reflective strip on the back of the leg, they are being worn incorrectly and the level of protection may be altered. Attach the holding straps to your belt. There are four different snap settings to adjust length. The chaps should fit loose enough so that there is no binding or pinching when bending or working on your knees.

To remove the chaps, simply un-snap and step out.

CLEANING Option 1: Machine was on regular using warm/cold water. We recommend that you turn the chaps inside out to minimize scratching the tub of the washer.

Machine Wash

Hand Wash

Option 2: Take a five gallon bucket of water and add 2 tablespoons of a mild industrial cleaner (simple green works well) scrub and wash until clean.

Tumble Dry Low

Hang Dry (Indoors)

Tumble dry inside out on medium/cool setting or hang to dry.

Call 1-877-MY ARMOR or visit hexarmor.com

Proper ColdRush ® Care By regularly washing your ColdRush ® cooling products, they can last up to 300% longer. WASHING INSTRUCTIONS: Machine Wash • Wash on a regular cycle using cool water. Do not bleach. DRYING INSTRUCTIONS: • Tumble dry low setting or hang to dry (indoors). Do not iron. • Store in clean, dry conditions, away from direct sunlight or extreme temperatures.

Call 1-877-MY ARMOR or visit hexarmor.com

Made with FlippingBook - Online catalogs