Transmission Connectors - Splices/Sleeves (TD)

Splices— Compression

NOTE: Splices are EHV rated where conductor is 1.0 in (25.4 mm) O.D. or larger. Joint compound: Fittings are ACSS-rated when installed with Fargo ® HTJC16 joint compound. See table below for number of 16 oz tubes required for deadend body and terminal connections. (1) TJA splice assemblies ae full-tension rated for ACSS/TW conductors with standard high-strength (HS) and extra high-strength (EHS/UHS) steel cores. (2) Loop splice is minimum tension connector (no steel sleeve component required). (3) Compression press minimum size: 20AH and smaller — 12 ton 24AH through 40AH — 60 ton

42AH and larger — 100 ton 10SH and smaller — 12 ton 12SH and larger — 60 ton

Fargo Type HTJC16 Joint Compound Required (Cartridges Per Fitting)

D 16

Die Size 76AH 20AH 24AH 27AH 30AH 34AH 36AH 38AH 40AH 42AH 44AH

Catalog Series

Component

FT Splice Body

10 40

0.10 0.06

0.20 0.08

0.32 0.10

0.44 0.13

0.60 0.20

0.94 0.26

0.98 0.30

1.10 0.35

1.10 0.40

1.40 0.54

1.52 0.68

Loop Splice

September 2017