TechnoResearch

O2 INSTALLATION RIVET KIT

O2 Installation Rivet Kit

Part # TR200044

When combined with a set of wideband O2 sensors (such as our TRO2), the O2 installation kit allows you to get the most accurate readings so you can get the best possible results out of your tune. After the easy installation (no welding required), you can monitor both cylinders simultaneously and measure exhaust correctly with no false readings.

• Dump the Pump - No Pump or Sampling Tube Required • Monitor Both Cylinders Simultaneously • Measure Exhaust Gas Correctly • No Reversion Air giving false lean readings Includes: • 2 - O2 Sampler Blocks • Special Attachment Bolts • Exhaust Port Jet • 1- Hydraulic Insertion Tool (with case) • 2 - 5 foot exhaust hoses

• Fast, Accurate Reading with almost no delay • Easy Installation - No Welding Required • Can be used with Dynamometer or Portable Data Logger • When Done, Heat Shield covers seal screws maintains original look.

• 1 - Drill Bit • 25 - Rivnuts

• 25 - Seal Screws • 25 - Seal Washers

O2 Installation Block - Sold Each (two required)

Part # TR200047

Predominantly used if the dealership has the Screamin’ Eagle Exhaust Sampling Adapter Installation Tool # 14900008.