TPT March 2014

7-11 April 2014

With an emphasis on quality, STAROFIT’s rigorous supplier selection process accepts only products from ISO, PED and TÜV approved manufacturers. The company also specialises in demand-based tailor-made elbows and fittings to cater to complex requirements, to provide products that are sustainable under extreme conditions (eg tempera- ture, pressure and mediums). The ability to fulfil unique requests, even on short notice, provides customers with an additional advantage. STAROFIT is certified in accordance with ISO 9001, PED 97/23/EC and AD2000-W 0, and allows the products to be installed in plants subject to monitoring. Germany WALTER Stauffenberg GmbH & Co KG operates under the trade name Stauff, developing, producing and marketing fluid technology components for use in plant construction and mechanical engineering. The rising demands on all components and systems used within industrial water cycles are the result of the trend towards increasingly high operating pressure levels of up to 500 bar, and reduced water quantities used during descaling processes of steel components, eg in continuous milling and casting procedures, oil removal from hot-rolled sheeting and removing pickling residue in the mill train. Fax: +49 4222 9440 44 Email: info@starofit.de Website: www.starofit.de Stauff 1E29

Stauff clamps from the Construction Series enable a secure and controlled fastening of pipes with outside diameters between 220 and 1,000mm. Depending on their size, either four or five plastic pipe saddles made of polyamide provide the required protection to the pipeline and effectively dampen vibrations and noises, such as those created by pressure fluctuations and peaks within the system. The assembly principle of clamps from the Construction Series is simple, and they can be installed on-site without special tools. The pipe rests on the lower clamp half, a primed or hot-dip galvanised one-piece steel construction that can be welded or bolted to the substructure, or embedded in cement, as required. The upper clamp part lies on top and is connected to the lower half by two M30 threaded rods. This provides a maintenance-free pipe clamping system, while still remaining detachable at all times (eg for inspection, repair or exchange of the pipe, or the installation of additional components to the system), which ensures a high level of operational safety for the entire water system, in spite of the increasing demands. Tracto-Technik GmbH & Co KG 5E21 Germany AT Tube 2014, Tracto-Technik will present technology for bending and processing tubes, as well as high- precision measuring systems for quality control and reverse engineering, and software solutions for tube shop automation and workflow optimisation. In tube bending technology, the company will show the servo-electrically driven, multi-radius CNC tube bending machine Tubotron 25 MR for tubes from 4 to 25mm OD, without any hydraulics. The machine’s exposed and compact bending head enables the production of complex tube shapes at bending speeds up to 170°/sec. The main applications are in aerospace technology, automotive industry and furniture industry. The Tuboform C is a new combined table-top machine for hydraulic connection technology, which enables quick and safe flaring of tube ends as well as leakage-free assembly of various cutting-rings. Fax: +49 2392 2505 Email: sales@stauff.com Website: www.stauff.com



The Tuboscan S 200 for fast and precise optical measuring of tube and pipe shapes

The Tuboscan S optical measuring system determines the geometric data of tube figures within a matter of seconds. In addition to tube bends with standard radii, the device can also measure and document freeform bends. The measuring system is suitable for quality assurance as well as for correction of tube bending data, and is available with different measuring ranges. Customer- specific requirements can also be considered for the layout. In addition to machinery and measuring technology, Tracto-Technik will present a new version of its Pipefab software package. This comprehensive workflow optimisation software has been completely re-engineered and is now available with various functions and new features. Its modular design, starting with a sketch edition, over bending edition, hydraulic edition and manufacturing edition up to a professional edition, ensures custom- made, practicable and efficient solutions for all kinds of users. Fax: +49 2725 9540 33 Email: tubomat@tracto-technik.de Website: www.tracto-technik.com transfluid Maschinenbau GmbH 5G34 Germany DECISIONS to purchase plant and equipment for bending, forming, cutting or cleaning pipes and tubes sometimes have to be made very quickly. transfluid Maschinenbau has expanded its range of products and services for the convenience of the customer with the new ‘tu go’ concept. Selected machines are now ready and available ex-stock as standard solutions. In order to provide these quick turnaround solutions, transfluid has reorganised its factory workflow.

Stauff clamp from the Construction Series, with five plastic pipe saddles made of polyamide



206

www.read-tpt.com

M ARCH 2014