Transmission Connectors - Line and Tower Hardware (TA)

Hardware Fittings— Forged Steel Hot Line Extension Links

A 30

FORGED STEEL H/F

Extension links are forged from high-strength steel and contain no welded joints. Because of the variety of fittings and lengths, links are made only to order. Please specify by catalog number and length required.

Material: Body – galvanized steel

Product Data

Approx Packed Weight (1) Per 100 Minimum Length lb (kg)

Available Range of Lengths

Ultimate Strength lb (kN)

Shape And Orientation Of Ends

Catalog Number

Figure Number

Identification

Minimum Inches (mm)

Maximum Inches (mm)

HOO30L HOOT30L HOO40L HOOT40L HOO50L HOOT50L HOO80L HOOT80L FHCE30L

30,000 (133) 40,000 (178) 60,000 (267) 80,000 (356) 30,000 (133) 30,000 (133) 30,000 (133) 30,000 (133) 30,000 (133) 50,000 (222) 30,000 (133) 50,000 (222) 30,000 (133) 50,000 (222) 30,000 (133) 50,000 (222) 30,000 (133) 50,000 (222)

12 (305) 12 (305) 13 (330.) 14 (356) 11 (279) 11 (279) 11 (279) 12 (305) 11 (279) 12 (305) 11 (279) 14 (356) 11 (279) 11 (279) 11 (279) 11 (279) 11 (279) 11 (279)

144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658) 144 (3,658)

383 (174) 383 (174) 536 (243) 616 (279) 366 (166) 369 (167) 294 (133) 372 (169) 357 (162) 527 (239) 451 (205) 451 (205) 272 (123) 420 (291) 342 (155) 442 (200) 323 (147) 430 (195)

1

2

Chain Eye/Chain Eye

3

4

Clevis Eye

5 & 9

FHCE30L90 FHYCE30L FHYCE30L90

Y-Clevis Eye

7 & 9

FOPE30L

Chain Eye/Eye

2 & 9

FOPE30L90

FHCC30L

Clevis/Clevis

5

FHCC30L90 FHOEC30L FHOEC30L90 FHOEC50L FHOEC50L90 HYCOE30L HYCOE30L90 HYCOE50L HYCOE50L90

2 & 5

Chain Eye/Clevis

3 & 6

2 & 7

Chain Eye/Y-Clevis

3 & 8

24 (610) 24 (610) 24 (610) 24 (610) 24 (610) 24 (610)

HBC30L

5 & 10

Clevis/Ball

HBC50L

6 & 11

HYBC30L

7 & 10

Y-Clevis/Ball

HYBC50L

8 & 11

HOEB30L

1 & 10

Chain Eye/Ball

HOEB50L

3 & 11

NOTE: Link length available 1/2"increments. Use letter “D” to represent decimal point in catalog number when applicable. Example: HOO3020D5 for 201/2" length. Normal manufacturing tolerances: Up to 50" – ±0.5 inch. Above 50" – ±1%. (1) For links longer than minimum length, add to packed weight per 100 pieces, 28 pounds per inch for number HOO80L and HOOT80L. All others, add 17 pounds per inch. Refer to next page for dimensions.

September 2017