Independent Ag Equipment
CENTRIFUGAL PUMPS
SERIES 1521C GAS ENGINE DRIVEN, CAST IRON CENTRIFUGAL PUMP
Pentair Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs, filling nurse tanks, watering seed beds, and transferring liquids. Its rugged cast iron housing stands up to strong chemical herbicides. • PowerPro engine • Close coupled, engine driven • Nylon impeller • Pump seals: Viton/ceramic standard, BunaN/ceramic and Life Guard silicone carbide available
PUMPS
• Weight: 65 lb/29.4 kg • Max. flow: 110 GPM • Max. pressure: 70 PSI • Max. liquid temp: 140°F/60°C Part No. 1521C-65 ......................... Price: $1,590.77
PRESSURE WASHER
HYDRAULIC PRESSURE WASHER FOR AGRICULTURAL AND INDUSTRIAL USE
• Triplex plunger pump flow: 3 GPM at 1000 PSI • Unloader maximum pressure: 1000 PSI • Water inlet: ½" NPT • Water outlet: ⅜" quick disconnect • Hydraulic motor requirements: 5 GPM at 1000 PSI • Motor inlet and outlet: ½" NPT (F) • Pressure wash hose: ⅜" I.D. 50 ft length, 3000 PSI rating • Trigger gun: 4000 PSI rating: insulated 22" wand, Hi-Lo adjustable spray pattern nozzle • Shipping weight: 40 lb *Mount this washer on your Willmar Air Ride, or any rolling stock.
Hypro’s hydraulic pressure washer Model 1802 is ideally suited for remote and explosive-proof environments where electricity can’t be used. This smooth-operating triplex plunger pump features an HM1 gerotor motor with double-lip Teflon shaft seals, unloader gauge, and quick disconnect, complete with a 50 foot pressure wash hose, trigger gun, and insulted wand with a Hi-Lo adjustable nozzle.
Description
Part No.
Price
Complete unit
1802C 2731.48
Unit less hose gun and wand
1803C 2329.30
HYDRAULIC PRESSURE WASHER HOOK-UP FOR FLOW OF 3 GPM AT 1000 PSI
Some assembly is required to mount and plumb this washer to your equipment. If you have any questions please call our service department
Unloader adjustment knob
Hydraulic quick disconnect matches
Gauge
Fresh water
female end on Kit 8000-0028
Hydraulic Connections ½" NPT (2 places)
Full flow ¾" shutoff valve
Hydraulic input requirements: Must be 5 GPM at 1000 PSI
¾" hose
5 ⅛"
Four holes at 25 / 64 " diameters
¾" hose strainer 80 mesh (Hypro 3350-0035. 3350-0045 or 3350-0035A)
½" NPT x¾" hose barb (not supplied)
• Kit 8000-0028 includes 50 ft pressure hose, gun wand nozzle, and female quick disconnect • Tank is mounted even or above the pump. Mount the tank higher if an inlet hose length is over 15 ft
• Use 3373-0020 orifice in the pressure port when using a pressure compensated hydraulic pump without flow control • Requires 4-6 GPM hydraulic oil flow at 1100-1300 PSI inlet pressure 100-300 PSI outlet hydraulic oil pressure
WARNING
DO NOT RUN THE PUMP DRY!
106 | INDEPENDENT AG EQUIPMENT PRODUCT CATALOG | PA: 800-345-3546 | OH: 800-848-8460 | IN: 888-563-1988 | www.IndependentAg.com
Made with FlippingBook