Exhibition Stand Design

First page Previous page 15 Next page Last page

hpc 5x1.5M Stand at CIPD - 15th June 2016, Croke Park

T3 component detailing

front elevation

left side elevation

T3 Component requirements: ° ALL components to be Fusion Beams ° Please note lightbox surround to be Fusion Beams and also have fabric channel insert to front face ° Tecna to print and finish lightbox graphic ° Please allow for ALL additional braces, fittings & multi-purpose channels ° CASE NOT REQUIRED PLEASE NOTE THAT CLIENT IS SUPPLYING RAISED FLOOR, LIGHTING AND COUNTER

947mm

702mm

212mm

1069.5mm

33mm

33mm33mm

33mm

WL 1000mm

CHMUIC 1069.5mm

WL 1000mm

33mm 33mm 1192mm 1069.5mm

33mm 33mm 33mm 1192mm 1069.5mm

CHMUIC 1069.5mm

fabric lightbox

CHMUIC 1192mm

existing structural wall

client counter

left perspective view

please note lightbox with consist of Fusion on 2 faces with fabric channel to front face

33mm

947mm

702mm

212mm

33mm

33mm33mm

fabric lightbox

existing structural wall

CHMUIC 1192mm CHMUIC 1192mm

WL 1000mm

33mm 33mm

212mm

212mm 1069.5mm

33mm 33mm33mm

client counter

client: hpc - high performance culture title: T3 Modular Exhibition Stand scale: 1:30 @ A3

existing structural wall

date: 026.05.16 venue: Various

client to supply raised floor finished height at 28-30mm (allocated floor space 5w x 1.5d x 2.5h M)

client to supply counter

project Manager: G.K

designer: J.M.

plan view

drg no: DS702x26.05.16 001x26.05.16

This is a computer generated visual and may vary from actuality. Estimates, designs, plans or models prepared by Minprint for the

information of the customer remain the property of Minprint and are copyright. They must not in partor in whole be submitted to or copied or otherwise made use of by any other without prior written permission from Minprint . c

Made with FlippingBook