Sonic Catalog 2020/21
Timing tools
SAAB
829015 - ENGINE TIMING KIT FIAT, OPEL, SAAB JTD DIESEL - 1.6, 1.9, 2.0, 2.4
The 829015 engine timing kit has been put together to provide the essential crankshaft and cam shaft timing pins only for the Fiat/Opel JTD diesel engines found across the Fiat, Opel, Saab ranges.
COMPONENTS
PETROL
PETROL
DIESEL
DIESEL
BELT
BELT
CHAIN
CHAIN
REF ART. NO.
OEM
DESCRIPTION
1
4880188 1.870.896.900, EN-46789, 32 025 008
Camshaft alignment tool
2 4880136 1.860.898.000
Flywheel locking tool
3 4880137 -
Stud assy
4 4880218 -
M8 x 20mm socket head screw
5 4880091
1.860.965.000
Setting pin (chem. black) (6 X 60)
6 4880187 1.860.905.000, 1.860.905.010, 2.000.003.000,
Crankshaft alignment tool
EN-46788, 32 025 009
SAAB
829062 - ENGINE TIMING KIT OPEL, RENAULT, SAAB DIESEL DOHC CDTI - 1.9
The 829062 provides the essential tools required to replace the camshaft drive belt and remove the camshafts on the Vauxhall/Opel CDTi 1.9/2.0lt twin cam diesel engines listed below.
COMPONENTS
PETROL
BELT PETROL
DIESEL
CHAIN DIESEL
BELT
REF ART. NO.
OEM
DESCRIPTION
1
4880137 EN-46788
Stud assy
2 4880185 KM-6130, 6349
Auxilliary drive belt tensioner locking pin (4 x 55)
3 4880187 EN-46788/1, 32 025 009 Crankshaft alignment tool
4 4880188 EN-46789, 32 025 008 Camshaft alignment tool
08
5 4880189 EN-46789-100
Camshaft setting pin assy.
6 4880332 SSM8x20B
M8 x 20 H.T. setscrew
SAAB
829064 - ENGINE TIMING KIT OPEL/CHEVROLET/SAAB PETROL (A20/A24) - 2.0, 2.4
Developed specifically for the high power output 2.0 litre and 2.4 litre twin cam turbo charged petrol engines found across the GM, Chevrolet and Saab ranges. This kit provides all the components required to set and hold the camshafts, crankshaft and chain tensioner components when performing major engine work or replacing the cam chain and associated components.
PETROL
PETROL BELT
DIESEL
DIESEL CHAIN
BELT
COMPONENTS
REF ART. NO.
OEM
DESCRIPTION
1
4880231
EN-49212, EN-49212-1
Vauxhall - Opel - camshaft locking tool LHS (OEM ref: EN-492) Vauxhall - Opel - camshaft locking tool RHS (OEM ref: EN-492)
2 4880232 EN-49212, EN-49212-2
3 4880317 EN-48953
Camshaft adjuster holding tool
4 4880318 EN-48585
Crankshaft bolt hole balancer
5 4880320 J45027-2, EN45027-2, EN-45027,
Tension plunger holder
6 4880321
EN-45027-1, J-45027-1
Tension plunger remover
7 4880319 EN-43653, J43653
Flywheel holding tool bottom half
8 4880135 EN-43653, J43653
Flywheel holding tool
9 4880214 -
M6 x 50 caphead screw
10 4880010 -
Washers M6 form C Zc.Pl.
11 4880173 EN-955-20, KM 955-20 Tensioner location pin 4mm
12 4880172 EN-955-10, KM955
Tensioner location pin 2.5mm
13 4880215 -
M6 x 16 cap head screw self-colour to BS4168
| S O N I C - E Q U I P M E N T. C OM 294
Made with FlippingBook - Online catalogs