2012 Catalog

ERICKSON ® PRODUCTS

CAT. V-FLANGE SHELLMILL ADAPTER

• COMPLETE SELECTION OF RETENTION STUDS AVAILABLE. • 2 & 2-1/2" PILOT DIAMETER ADAPTERS HAVE FOUR 5/8-11 TAPPED HOLES ON A 4" BOLT CIRCLE. ON THESE HOLDERS BLACK SCREWS MUST BE ORDERED SEPARATELY. • TAPER IS HELD TO AN ACCURACY OF AT-3 OR BETTER AND IS GROUND AFTER BLACK-OXIDE. NON-CRITICAL SURFACES ARE BLACK-OXIDED FOR RUST RESISTANCE. CAT. V-FLANGE TAPER SHELLMILL ADAPTERS B L CAT. NO. 1/2 .562 1.38 CV40SM050138 .463 5.50 CV50SM050550 3/4 .688 1.38 CV40SM075138 .688 1.50 CV50SM075150 3/4 .688 3.50 CV40SM075350 .688 3.50 CV50SM075350 3/4 .688 6.50 CV40SM075600 .688 5.50 CV50SM075550 3/4 .688 7.00 CV50SM075700 3/4 .688 9.00 CV50SM075900 1" .688 2.06 CV40SM100206 .688 2.00 CV50SM100200 1" .688 4.00 CV40SM100400 .688 4.00 CV50SM100400 1" .688 6.00 CV40SM100600 .688 6.00 CV50SM100600 1" .688 8.00 CV50SM100800 1" .688 10.0 CV50SM1001000 1-1/4 .688 2.12 CV40SM125212 .688 1.50 CV50SM125150 1-1/4 .688 4.00 CV40SM125400 .688 3.50 CV50SM125350 1-1/4 .688 5.50 CV50SM125550 1-1/4 .688 7.00 CV50SM125700 1-1/4 .688 9.00 CV50SM125900 1-1/2 .938 2.41 CV40SM150241 .938 2.50 CV50SM150240 1-1/2 .938 4.00 CV40SM150400 .938 4.00 CV50SM150400 1-1/2 .938 6.00 CV50SM150600 1-1/2 .938 8.00 CV50SM150800 2" .938 2.40 CV50SM200240 2" .938 4.00 CV50SM200400 2" .938 6.00 CV50SM200600 2" .938 8.00 CV50SM200800 2-1/2 1.12 2.40 CV50SM250240 2-1/2 1.12 4.00 CV50SM250400 40 V-FLANGE SHANK 50 V-FLANGE SHANK PILOT DIAMETER B L CAT. NO.

ALSO AVAILABLE IN METRIC SIZES.

HSK SHANK TOOL HOLDERS

A complete line of HSK shank tool holders is available in sizes 40, 50, 63, 80 & 100 formsA, C&E . Its features includerigidityandpositioningaccuracy. In comparison to steep taper tooling, higher cutting speeds/revolutions are possible with HSK tooling. HSK enjoys a good reputation in higher speed and highprecisionmachiningapplicationsonmachining centers, multi-spindle machines and transfer lines. It is also gaining popularity in the automotive,

V-FLANGE CHUCK

COLLETS

aerospace, and component industries. Please call with your requirements.

112

SWISS

CNC

MULTI- SPINDLE

BROWN & SHARPE

DAVENPORT