2012 Catalog

UNIVERSAL TOOL POST TAP EXTENSIONS ADJUSTABLE RELEASING TAP HOLDER

UNIVERSAL TOOL POST

• Can be adapted to turret lathes and hand screw machines • Can be set up close to chuck • Can be used with R & L cut-off blade holder

• Holds flat form tools on front or rear slide • Can be used for skiving tools as well as for flat form tools • For both right and left hand spindle rotation

UNIVERSAL TOOL POST PARTS

UNIVERSAL TOOL POSTS SPECIFICATIONS

TP00 TP1 TP2 Cat. No. Cat. No. Cat. No. TP00-1 TP1-1 TP2-1 TP00-2 TP1-2 TP2-2 00TPB-3 0TPB-3 2TPB-3 00TPB-2 0TPB-2 2TPB-2 00TBN 0TBN 2TBN TP00-6 TP1-6 TP2-6 TP00-7 TP1-7 TP2-7 TP00-8 TP1-8 TP2-8

CAT. NO.

A B C D E F G FITS

Part No. 1. Body

1-13/16 1"

3/8 1/2 3/8 1-1/2 No. 00 B&S

TP00

3" 4"

TP1 TP2

2-13/32 1-5/16 1/2 3/4 1/2 1-27/32 No. 0 B&S

2. Bushing

1-7/16 5/8 1"

5/8 2-3/32 No. 2 B&S

4-1/2 3"

3. Long Bolts (ea) 4. Short Bolts(ea)

5. Nuts (ea)

6. Tape Wedge 7. Raising Block 8. Adjusting Screw 9. Clamp Screws (ea)

TT1-6 TT2-13 TT2-13 10. Alignment Screws (ea) TP00-10 TP1-10 TP1-10

(FOR STANDARD FORM TOOL BLANKS TO FIT THESE TOOL POSTS SEE PAGE 28.)

TAP SIZE

F REF

A B C LENGTH CAT. NO.

#6 #8 #8

.500 4.750 .938 .562 4.688 .812

6.03 FTE6475 6.03 FTE8469

TAP EXTENSIONS

.562 9.094 .812 10.44 FTE8909 .562 4.688 1.062 6.03 FTE10469 .562 9.094 1.062 10.44 FTE10909 .590 4.688 1.093 6.03 FTE12469 .590 4.688 1.188 6.03 FTE025469 .590 9.094 1.188 10.44 FTE025909 .590 4.531 1.250 6.03 FTE031453 .590 8.938 1.250 10.44 FTE031894 .750 4.438 1.375 6.03 FTE037444 .750 8.843 1.375 10.44 FTE037884 .590 4.250 1.406 6.03 FTE043412 .750 4.062 1.438 6.03 FTE050406 .750 8.469 1.438 10.44 FTE050847 .750 3.906 1.500 6.03 FTE056391 .750 8.312 1.500 10.44 FTE056831 .812 3.750 1.562 6.03 FTE062375 .812 8.156 1.562 10.44 FTE062816

#10 #10 #12

USED WHERE ADDITIONAL LENGTH IS REQUIRED.

#14 & 1/4 #14 & 1/4

USE WITH 3/4" TAP COLLET (.590) ON THE REQUIRED TAP CHUCK.

5/16 5/16 3/8 3/8 1/2 1/2 7/16 9/16 9/16

TOOL HOLDERS S.S. COLLET CHUCKS

5/8 5/8

11/16 .875 3.812 1.875 6.03 FTE068381 1/8P WITH 7/16 .750 5.000 1.125 6.03 FTE012P500 SHANK 1/8P WITH 7/16 .750 9.406 1.125 10.44 FTE012P941 SHANK 1/8P WITH 5/16 .590 5.000 1.125 6.03 FTE006P500 SHANK 1/8P WITH 5/16 .590 9.406 1.125 10.44 FTE006P941 SHANK 1/4P .875 4.688 1.125 6.03 FTE025P468 1/4P .875 9.094 1.125 10.44 FTE025P909 3/8P 1.000 4.750 1.312 6.03 FTE037P475 3/8P 1.000 9.156 1.312 10.44 FTE037P916

ADJUSTABLE RELEASING TAP HOLDER

Now the exclusive principal of the R & L clutch type releasing Tap Holder is available in theadjustable (floating) type. This new tool gives all the advantages of the R & L Releasing Tap Holder and in addition can also be used on screw machines and turret lathes that are out of alignment. ADJUSTABLE (FLOATING) RELEASING TAP HOLDERS

TAP CAPACITY

All other dimensions and parts are the same as Releasing Tap Holder (Pg. 67 ). ADJUSTABLE RELEASING TAP HOLDER PARTS K L HAND PIPE ARTH00 5/8 1-3/8 2-1/8 1-11/32 7/16 1/8 ARTH1 3/4 1-19/32 2-3/4 1-11/16 11/16 1/4 ARTH2 1" 2-7/32 3-1/2 2-3/8 1-1/8 3/4 ARTH3 1-1/4 2-13/16 4-5/8 3-1/4 1-1/4 1" ARTH4 1-1/2 3-5/8 5-1/2 4-5/32 1-1/2 1" CAT. NO. A J

ARTH00 ARTH1 ARTH2 ARTH3 ARTH4

Part No. 16. Shank 17. Head

Cat. No.

Cat. No.

Cat. No.

Cat. No.

Cat. No.

ARTH00-16 ARTH1-16 ARTH2-16 ARTH3-16 ARTH4-16

ARTH00-17 ARTH1-17 ARTH2-17 ARTH3-17 ARTH4-17 18. Clamp Screw ARTH00-18 ARTH1-18 FDH1-4 FDH4A-4 FDH4B-4 & Washer

SEE PG. 97 FOR TAP HOLDER BUSHINGS FOR THESE TAP HOLDERS.

66

SWISS

CNC

MULTI- SPINDLE

BROWN & SHARPE

DAVENPORT