2012 Catalog

STRAIGHT SHANK DA & TG COLLET CHUCKS MORSE TAPER SHANK COLLET CHUCKS

RECOMMENDED FOR DRILLING close-center • GRIP 1:1 • SMALL OUTSIDE DIAMETER CLEAR- ANCE IS IDEAL FOR MACHING CENTERS, AND CLOSE CENTER- DISTANCE AND FIXTURE PROBLEMS • RECOMMENDED FOR APPLICA- TIONS WHERE REACH AND CLOSE PROXIMITY OF WORKPIECE PROBLEMS ARE ENCOUNTERED • FITTED WITH LEFT-HAND THREAD STOP SCREWS • THROUGH-THE-TOOLHOLDER COOLANT CAPABILITY

ERICKSON ® PRODUCTS

C COLLET H S CAPACITY SERIES A B L DIAMETER HEX MIN/MAX CAT. NO. D

LOCKNUT

1/2 1.5/3.9 SS050DA304438 LNA304M 1/2 1.5/4.2 SS050DA304681 LNA304M 3/4 1.6/4.7 SS075DA204469 LNA204M

1/32-1/4 300 1/2 3.0 4.38 .56 1/32-1/4 300 1/2 5.4 6.81 .56 3/64-25/64 200 3/4 3.0 4.69 .84 3/64-25/64 200 3/4 5.5 7.12 .84

3/4 1.6/4.7 SS075DA204712 LNA204M 3/64-9/16 100 1" 3.0 4.88 1.06 15/16 1.9/4.2 SS100DA104488 LNA104M 3/64-9/16 100 1" 5.4 7.31 1.06 15/16 1.9/6.6 SS100DA104731 LNA104M 3/64-3/4 180 1-1/4 5.5 7.38 1.44 1-3/16 1.9/6.6 SS125DA184738 LNA184M 3/64-3/4 180 1-1/4 8" 9.88 1.44 1.19 1.9/9.0 SS125DA184988 LNA184M 3/32-1" 400 1-1/2 5.5 7.90 1.88 1.68 2.2/7.0 SS150DA404791 LNA404M 3/32-1" 400 1-1/2 8" 10.40 1.88 1.68 2.2/9.4 SS150DA404104 LNA404M

SEE PAGES 118 AND 119 FOR COLLETS.

SINGLE ANGLE TG COLLET CHUCKS

RECOMMENDED FOR DRILLING, END MILLING AND SOLID TAPPING.

C COLLET S CAPACITY SERIES A B L HEX MIN/MAX CAT. NO. LOCKNUT 3/64-17/32 50TG 1" 5.5 7.19 1-1/16 1.75/6.5 SS100TG050719 NPA050 3/64-17/32 50TG 1" 5.5 6.98 1.5" 1.54/6.3 SS100TG050698G NPA075 1/16-3/4 75TG 1-1/4 6" 8.50 1-7/8 2.1/7.6 SS125TG075850 NPA100 1/16-3/4 75TG 1-1/2 6" 7.75 1-7/8 2.1/7.1 SS150TG075775 NPA075 3/32-1" 100TG 1-1/2 6" 9.25 2-1/4 2.6/8.6 SS150TG100925 NPA100 3/32-1" 100TG 1-3/4 6" 8.19 2-1/4 2.9/7.5 SS175TG100819 NPA100 3/32-1" 100TG 2" 6" 8.19 2-1/4 2.6/7.5 SS200TG100819 NPA100 H

ERICKSON ® PRODUCTS

SEE PAGES 120 TO 122 FOR COLLETS.

• TREMENDOUS GRIP (3:1 ADVANTAGE) • TREMENDOUS GRIP (TG) COLLET CHUCKS PROVIDE THE GRIP AND ACCURACY NECESSARY FOR THE DEMANDS OF TODAY'S MA- CHINE TOOLS BECAUSE OF ITS SLOW COLLET TAPER AND BEARING-STYLE NOSEPIECE. • COLLETS COLLAPSE 1/64" AND CAN GRIP ON BACK TAPER AND MARGINS OF DRILLS TO ALLOW FOR MAXIMUM FEED RATES AND MORE ACCURATE HOLES. • THE VERSATILITY AND GRIPPING POWER OF THE TG CHUCK IS SUPERIOR TO COMPETITIVE DESIGNS. • THROUGH-THE-TOOLHOLDER COOLANT CAPABLITY

TOOL HOLDERS

S.S. COLLET CHUCKS

MORSE TAPER SHANK COLLET CHUCKS

MORSE TAPER ER COLLET CHUCK Cat. No. Range L G

J

D

MT2-ER20 MT2-ER25 MT3-ER32

.022-.514 1.687 3/8-16 .041-.632 1.875 3/8-16 .080-.789 2.750 1/2-13

M10 M10 M12 M12 M16 M16 M16

1.344 1.656 1.968 2.484 1.968 2.484

MT3-ER40 .120-1.025 3.125 1/2-13

MT4-ER32

.080-.789 2.406 5/8-11

MT4-ER40 .120-1.025 3.187 5/8-11 MT4-ER50 .396-1.338 4.937 5/8-11 3.078 MT5-ER40 .120-1.025 3.250 3/4-16 M28 X 1.5 2.484 MT5-ER50 .396-1.338 3.328 3/4-16 M28 X 1.5 3.078 MT6-ER50 .396-1.338 3.937 1-8 M36 X 1.5 3.078

SEE PAGES 116 & 117 FOR COLLETS.

75

SWISS

CNC

MULTI- SPINDLE

BROWN & SHARPE

DAVENPORT