TPT March 2009

H andling & P ackaging T echnology

Tube decoilers for automatic tube feeding

of single or double decoilers, with horizontal or vertical axis. Double decoilers allow a double capability of decoiling as well as the change of coils at masked time. Available as motorized or non-motorized, these uncoilers are coupled with a module of regulation. This enables regulation of the unwinding speed and compensation for shock due to the rolling-up of the product or drive exercised by the machine. The decoilers are designed to reach 200m/ min. The Ravni uncoilers are very strong and designed to resist the difficult conditions of industrial production. They are adapted to the various processes of load while guaranteeing total safety to the operator. Ravni Technologies delivers all over the world, supplying and installing machinery and training the operators. Ravni Technologies – France

Ravni Technologies, France, is the manufacturer of an extensive range of regulated and motorized decoilers. These decoilers are designed to feed automatic steel tubes, copper tubes, and coated

tubes, into straightening and cutting lines with a diameter range of 1-22mm. The weight of the coils starts from 30kg up to 3 tons. There is availability

 Ravni provide an extensive range of regulated or motorized decoilers

Fax : +33 477 905865 Email : info@ravni.com Website : www.ravni.com

n

Do you want to weld better and faster?

booth 505

Журнал Tube & Pipe Technology: Теперь можно прочитать в Интернете на русском языке › Больше новостей › Больше технологий › Больше главных новостей › А теперь еще больше языков!

Вслед за успехом после размещения на сайте содержания журнала на китайском языке, основные новости и раздел подробностей каждого выпуска журнала Tube & Pipe Technology теперь будут переводиться на русский язык и размещаться на сайте www.read-tpt.com Если Вы хотите разместить баннер с рекламой на русских веб-страницах, пожалуйста, обращайтесь по электронному адресу catherine@intras.co.uk www.read-tpt.com

without edge trimming

with edge trimming

Just go for it with strip edge trimming!

www.julius.de info@julius.de

107

www.read-tpt.com

M arch 2009

›