Workshop Solutions Ireland 2017
BEST PRICE PROMISE
THERMOBILE AUTOMATIC IGNITION UNIVERSAL OIL HEATERS • Multifuel capability, can also operate on heating oil or diesel • Minimal maintenance heaters with clean, soot-free combustion • 1 phase or 3 phase motors • Fixed or rotatable vents for total control over air circulation • Insulated panels for safety and efficiency
Up to 180,000 BTU 1 phase motors rotatable vent heaters with exclusive 2 years warranty only available fromWorkshop Solutions.
SB40 UNIVERSAL OIL HEATER WITH FLUE KIT, MIN 140,000BTU/HR 594 77 1370
SB60 UNIVERSAL OIL HEATER WITH FLUE KIT, MIN 180,000BTU/HR 594 77 1380
GREATER THAN 180,000BTU 3 PHASE MOTORS, ROTATABLE VENT HEATERS
SB80 UNIVERSAL OIL HEATER WITH FLUE KIT, INCL. MOTOR & PUMP KIT, MIN 270,000BTU/HR 594 77 1390
SB110 UNIVERSAL OIL HEATER WITH FLUE KIT, INCL. MOTOR & PUMP KIT, MIN 390,000BTU/HR 594 77 1400
FLUE BOOSTER – IN-LINE HEAT EXCHANGER 594 77 2260 Increase the heat efficiency of your existing heater by up to 30%! Easy to fit the Flue Booster just slots in and AT utilises heat that would normally be lost through the flue. An in-line multi- pass stainless steel flue gas heat exchanger which can raise the efficiency of used oil heaters up to a maximum of 90%. • Suitable for models: AT306, AT306T, AT307 & AT400 • The unit simply slots into the 150mm diameter flue pipe system • A 220-240V supply is required for the fan • With free blowing grille outlet or with an 80mm diameter duct spigot
FOR THERMOBILE AT RANGE HEATERS
Availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded.
Made with FlippingBook Annual report