Catálogo Hanna Instruments V31

edge ® blu technical features Rechargeable Battery

edge blu design features

2

edge blu has a built in rechargeable battery that is charged when the meter is in the plugged in benchtop or wall mount cradle. The battery can also be recharged through the micro USB port with either a USB port from a computer or directly to the power supply.

CAL Check™ Hanna’s exclusive CAL Check feature analyzes the pH electrode response in the pH buffers during the calibration process to alert the user of potential problems such as a contaminated buffer or dirty electrode. After calibration, indicators for probe condition are displayed on the measurement screen. The probe condition is based on offset and slope characteristics of the pH electrode.

Capacitive touch keypad edge blu features sensitive capacitive touch buttons for accurate keystrokes when navigating edge’s menus and screens. Since they are part of the screen, the buttons can never get clogged with sample residue.

pH

Two USB ports edge blu includes one standard USB for exporting data to a flash drive. edge blu also includes one micro USB port for exporting files to your computer as well as for charging when the cradle is not available.

5.5"

Bluetooth Smart Technology HI11102 HALO® pH electrode uses Bluetooth® Smart Technology (Bluetooth 4.0). This technology offers low power consumption allowing for a long 500 hour battery life. The range of the Bluetooth connection is 10 m (33’) between the probe and receiving device.

Easy to read LCD edge blu features a 5.5” (14 cm) LCD display that you can clearly view fromover 5m (16.4’). The large display, with its wide 150° viewing angle, provides one of the easiest to read LCDs in the industry.

edge ® blu

Data logging Log-on-demand,

log-on-stability, and interval logging modes are all available. Up to 200 data points can be logged on demand and an additional 200 data points for samples logged upon a stable reading. Interval logging is adjustable from 5 seconds to 180 minutes. Up to 600 records can be stored in amaximum of 100 interval lots. Logging modes can be started from the meter or by simply pressing the button on the HALO pH probe. GLP Data of the last calibration you perform is stored in the sensor including the date, time, and buffers used. When the sensor is connected to edge blu, GLP data is automatically transferred.

Auto-detection At a push of the button, the HALO pH electrode enters discovery mode and will be detected by edge blu. Once connected, the serial number, calibration information including date, time and buffers used, and the electrode specificationswill be loaded into the meter. Having this information stored in the electrode allows for hot swapping to other pH electrodes without recalibrating. The details of the electrode and calibration information are stored with any logged readings.

Zero footprint Using the wall mount cradle (included), edge blu can be placed on a wall, leaving zero footprint on the benchtop space. The cradle has a built-in connector to power and charge the batteries.

TheBluetooth®wordmarkand logosare registered trademarksownedbyBluetoothSIG, Inc.

www.hannainst.com |

2.9