2017 Equipment & Parts Catalog

CENTRIFUGAL PUMPS

SERIES 1521C GAS ENGINE DRIVEN, CAST IRON CENTRIFUGAL PUMP

PUMPS

Pentair Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control.Make short work of other jobs, filling nurse tanks, watering seed beds, and transferring liquids. Its rugged cast iron housing stands up to strong chemical herbicides. • PowerPro engine • Close coupled, engine driven • Nylon impeller • Pump seals: Viton/ceramic standard, BunaN/ceramic & Life Guard silicone carbide available

• Weight: 65 lb/29.4 kg • Max. flow: 110 GPM • Max. pressure: 70 PSI • Max. liquid temp: 140°F/60°C Part No. 1521C-65 ........................ Price: $1,663.79

PRESSURE WASHER

Hypro’s hydraulic pressure washer model 1802 is ideally suited for re- mote and explosive-proof environments where electricity can’t be used. This smooth-operating triplex plunger pump features an HM1 gerotor motor with double-lip Teflon shaft seals, unloader gauge, and quick disconnect, complete with a 50 foot pressure wash hose, trigger gun, and insulated wand with a Hi-Lo adjustable nozzle. HYDRAULIC PRESSURE WASHER FOR AGRICULTURAL AND INDUSTRIAL USE

• Triplex plunger pump flow: 3 GPM @ 1000 PSI • Unloader max. pressure: 1000 PSI • Water inlet: ½" NPT • Water outlet: ⅜" quick disconnect • Hydraulic motor requirements: 5 GPM at 1000 PSI • Motor inlet & outlet: ½" NPT (F) • Pressure wash hose: ⅜" I.D. 50 ft length, 3000 PSI rating • Trigger gun: 4000 PSI rating: insulated 22" wand, Hi-Lo adjustable spray pattern nozzle • Shipping weight: 40 lb *Mount this washer on your Willmar Air Ride, or any rolling stock.

Description Complete unit

Part No. Price 1802C 2870.33 1803C 2447.80

Unit less hose gun & wand

HYDRAULIC PRESSURE WASHER HOOK-UP FOR FLOW OF 3 GPM @ 1000 PSI

Some assembly is required to mount and plumb this washer to your equipment. If you have any questions please call our Service Department.

Unloader adjustment knob

Hydraulic quick disconnect matches

Gauge

Fresh water

female end on Kit 8000-0028

Hydraulic Connections ½" NPT (2 places)

Full flow ¾" shutoff valve

Hydraulic input require- ments: Must be 5 GPM at 1000 PSI

¾" hose

5 ⅛"

Four holes at 25 / 64 " diameters

¾" hose strainer 80 mesh (Hypro 3350-0035. 3350-0045 or 3350-0035A)

½" NPT x¾" hose barb (not supplied)

• Use 3373-0020 orifice in the pressure port when using a pressure compensated hydraulic pump without flow control • Requires 4-6 GPM hydraulic oil flow at 1100-1300 PSI inlet pressure 100-300 PSI outlet hydraulic oil pressure

• Kit 8000-0028 includes 50' pressure hose, gun wand nozzle, & female quick disconnect • Tank is mounted even or above the pump. Mount the tank higher if an inlet hose length is over 15'

WARNING

DO NOT RUN THE PUMP DRY!

105