2017 Equipment & Parts Catalog

Consult the internet Selection Guide at www.AcePumps.com to determine which pump is right for you. CENTRIFUGAL PUMPS & BREAKDOWN STAINLESS STEEL HIGH PERFORMANCE HYDRAULIC MOTOR DRIVEN

• Integral needle valve bypasses up to 9 GPM (34 LPM) on open center systems • Standard Viton® carbon/ceramic seal or optional severe duty silicon carbide mechanical seal • Chemical resistant Valox® or optional cast iron impeller • SS shaft & wear ring FMC-150FSHYD-206............ Price: $2,448.41

• Suction 220 flange & 1-½" NPT • Discharge 200 flange & 1-¼" NPT • 316 SS • Recommended for use on the following hydraulic systems: º Pressure compensating closed center º Load sensing or pressure flow compensating closed center º Open center up to 16 GPM (60.6 LPM)

PUMPS

Ref. No.

Part No. BAC-53

Description

Required

1 1 2 3 3 4 5 6 6 7 8 9 9

Pipe plug

4 4 1 1 1 1 1 1 1 1 1 1 4 4 1 2 2 2 1 1 1 1 1 1 4 2 1 1 1 1 1

41120

Pipe plug, SS (optional)

BAC-12-150-SS Volute, 316 SS, NPT & flanged (for 150FS models)

BAC-23-A

Nut, ⅜" NF, cad plated

BAC-23-A-SS Nut, ⅜" NF, SS (optional) BAC-24-HYD-SS Washer, ⅜" star, SS BAC-26-150-P Impeller, Valox, keyway

BAC-7V BAC-7SC

Seal, carbon/ceramic/Viton (includes 40160 O-ring) Seal, silicon carbide/Viton (includes 40160 O-ring) (optional)

6A

40160

O-ring, shaft seal O-ring, body seal

BAC-4-150

BAC-14-150-HYD-SS Mounting frame, 316 SS (for 150FS models)

40950 40930

Cap screw, ⅜" NC x ¾" hex head

Cap screw, ⅜" NC x ¾" hex head, SS (optional)

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

BAC-54 BAC-33 BAC-37 BAC-32

Slinger

Snap ring, internal, BAC-14 mounting frame

Ball bearing, sealed, BAC-6 shaft Snap ring, external, BAC-6 shaft

BAC-32-S BACH-25

Spacer for BAC-6 shaft

Key, ⅛" x ⅛" x ½"

BAC-6-HYD-SS Shaft, ⅝" diameter, keyway & tang slot, SS BAC-75-HYD-206 Hydraulic motor, 7 GPM (includes parts 18 - 25)

S200

Seal support spacer for 200 Series HYD motor

BAC-75-HYD-206N Hydraulic motor, 7 GPM (motor only - no external fittings)

41255 41875

Cap screw, 5 ⁄ 16

" N. C. x 3- ¾" socket head (for 206N motor)

O-ring, #8 SAE fitting

BAC-78-8SAE Reverse check valve, #8 SAE male x ½" NPT female BAC-80-8SAE Adapter, restrictor body, #8 SAE male x ½" NPT female

41448

O-ring, orifice insert

BAC-79-7 LS-206N

Orifice, restrictor insert, .109 (206N)

Flow limiting valve (206N), #8 SAE male x ½" NPT female

121