Jackson Lumber Catalog

LUMBER & MILLWORK

ADHESIVES AND SEALANT FOR CELLULAR PVC TRIM PRODUCTS

Kleer Cellular PVC Cement

DESCRIPTION: Kleer Cellular PVC Cement is a superior quality, fast drying adhesive for bonding Kleer cellular PVC trim products. FEATURES: • Color matched to Kleer cellular PVC trim products • Dries quickly to produce a strong, yet flexible, bond • Outstanding resistance to weather and temperature extremes • Completely waterproof and can be used on wet surfaces • UV stable to resist yellowing and fading DESCRIPTION: Kleer Cellular PVC Structural Sealant is a high performance, resilient, flexible structural sealant that forms a durable, non-shrinking bond when used with Kleer cellular PVC trim products. FEATURES: • Solvent free, 100% solids formula will not shrink so it is ideal for filling nail holes • Affords 100% total joint movement for excellent performance in filling expansion gaps • UV inhibitors resist yellowing and fading • Non-slump formula can be applied vertically and overhead • Can be applied to damp surfaces and won't run if rained upon • 30 minute skin-over significantly reduces dirt pick-up. Can be painted in 1-2 hours with any 100% acrylic house paint • No unpleasant odor and zero VOC's DESCRIPTION: Kleer Cellular PVC Adhesive is a durable, two-component adhesive for Kleer cellular PVC applications with a work life at 75 o F of 4-7 minutes after mixing. It is ideal to fill nail holes and gaps up to 3/8" without the need for fasteners or biscuits, and can be used to smooth cut edges for a more finished look. It is EPA VOC and CARB compliant. FEATURES: • Permanent unitizing structural adhesive • Easy to apply • Dries quickly and can be handled in 10-30 minutes • Completely waterproof • UV stable to resist yellowing and fading • Color matched to Kleer Cellular PVC • Paintable DESCRIPTION: Kleer Cellular PVC Nail Stick is a two-part epoxy that can be used to fill nail holes and other minor imperfections in the surface of Kleer cellular PVC products. Once mixed, Kleer Cellular PVC Nail Stick cures to an off- white to light gray color and can easily be sanded, drilled and painted. FEATURES: • High performance two-part epoxy creates a hard, durable finish • Easily fills nail holes and other minor imperfections on the surface of Kleer cellular PVC products • Cures to an off-white or light gray color • Once fully cured, it can be drilled, sanded and painted • UV inhibitors resist yellowing • Doesn't sag and won't shrink after curing • Can be applied by brush or roller • Dried films can be reactivated

Applicator Guns KLEER offers applicator guns for both our 50 ml and 220 ml two-part adhesives. Both applicators are built of high quality materials to last. Our 50 ml gun is constructed of heavy plastic with the ability to accept up to a 10:1 ratio cartridge. The KLEER 220 ml gun is constructed with metal and is produced to last.

Kleer Cellular PVC Structural Sealant

Kleer Cellular PVC Adhesive

Caulk Gun Adaptor KLEER offers a Caulk Gun Adaptor for the flexibility to use our 50 ml cartridges with a standard caulk gun.

Kleer Cellular PVC Nail Stick

Kleer Quick Mixer Tips KLEER Quick Mixer Tips are available for both our 50 ml and 220 ml adhesive tubes. Get the perfect, on-ratio mix of KLEER Cellular PVC Adhesive each and every time. These twist lock mixers were designed with a low internal volume for less waste and greater value. With our 1:1 ratio cartridges, application is simple and effective.

www.kleerlumber.com

188

March 2018