Archive 2018 International Catalog

Optical transmission systems Customized Pre-Assembled FO Cable Solutions

ÖLFLEX ® ACCESSORIES FLEXIMARK ® SILVYN ® SKINTOP ® EPIC ® HITRONIC ® ETHERLINE ® UNITRONIC ® APPENDIX

Customized Pre-Assembled FO Cable Solutions ÖLFLEX ® CONNECT – integrated solutions made by LAPP

LAPP is offering an integrated solution with ÖLFLEX ® CONNECT – cables assembled exactly to your requirements. Everything is possible – from traditional cable assemblies to industry standard servo connections right up to highly complex drag chain systems. With ÖLFLEX ® CONNECT LAPP offers as well customized fibre optic system assemblies (FO trunks).

Customers can choose the right cable from the wide range of HITRONIC ® fibre optic cables which can be assembled exactly as per customer specification. By using factory assembled fibre optic cable solutions the installation for industry, telecommunication and office applications are significantly simplified.

Depending on the planning approach, time consuming connector installation or splicing at site can be avoided. Just lay the trunk system and simply plug it in with the factory pre-assembled connectors. A plug & play solution from LAPP.

Technical benefits

• No splice connections are necessary during installation. This saves time and costs for equipment and special tooling. • Low attenuation values by factory preassembled plugs • Trunk-system are easy to use without any further time consuming on-site processing

• Available with all major cable and connector types (LAPP HITRONIC ® range) • Ready to use fibre optic cabling system • IP 68 metallic cable unit splitter for glass fibre (GOF) loose tube cables up to 48 fibres

In a few steps to a customized FO-trunk-system:

Selection example:

1. Determination of the required fibre type – POF (980/1000) – PCF (200/230) – GOF (single-mode 9/125 OS2) (multimode 62,5/125 OM1) (multimode 50/125 OM2; OM3; OM4) 2. Selection of cable type and version See HITRONIC ® cable range (POF, PCF and GOF and number of fibers)

5. Cable pulling device Selection cable pulling device side 1 and/or side 2

Short designation: TRUNK GOF HUN1500-4E9/125-SC/LC-85m Description: – Customized pre-assembled fibre optic cable solution – Based on cable version HITRONIC ® HUN 4E9/125 OS2 – Assembled at both ends with connectors – side 1: 2 x SC-duplex connector – side 2: 2 x LC-duplex connector – Cable splitter unit IP68: – up to 24 fibres – M20 through hole – Side 1 protected with a cable pulling device – outer diameter < 30 mm

6. Specific requirements Regarding packaging and marking

7. LAPP in-house LAPP will check the technical feasibility and plausibility (fibre – cable – connector) and make a quotation

3. Determination of the system length

8. Easy ordering and fast shipping

4. Connector configuration Selection of connector type – side 1 and 2

– System length 85 m – On disposable drum – With test protocol

For questions about customized packaging and special issues we are happy to assist you.

For current information see: www.lappgroup.com

479