EoW November 2007

newmachinery & equipment launched in 2007 New soldering experience Cooper Hand Tools has created a new soldering experience with the WR3M Weller, a winner of the red dot design award for 2007. This versatile repair station is tailored to the needs and requirements of professional repairs to latest-technology electronic sub-assemblies in industrial production engineering. Three independent tool channels with automatic tool detection guarantees the simultaneous operation of three soldering tools.

WR3MWeller – winner of the red dot design award for 2007 ▲

Precise temperature control performance at the soldering tip is guaranteed by the digital control electro-technology, together with superior-quality sensor and heat- transfer technology. High-speed measured-value acquisition provides for maximum temperature precision and optimum dynamic temperature performance in load situations. All high-speed micro tools from Weller can be connected, while the new Weller hot air pencil HAP 200 offers increased power. Further advantages for the user are the USB port and the vacuum channel for pick- up. Innovative special functions such as automatic channel changing, temperature pre-selection buttons for each channel and factory calibration check guarantee high operation simplicity. The big LCD display allows clear information and simple handling. Cooper Tools GmbH – Germany Fax : +49 7143 580 108 Email : marketing-europe@cooperhandtools.de Website : www.cooperhandtools.com/europe Bacchetti sas, Italy, specialises in the design and manufacture of motor-driven de- coilers, both for coils and reels, designed for the wire and cable industry for the feeding of spring making machines, straightening machines and cable cutting machines. The de-coiler HSB 200 has been designed for reels (with maximum diameter 760mm and width 315mm) and for the feeding of high performance wire and cable cutting machines. The de-coiler is designed to allow an easy positioning of the reel between the cones using traditional lifting devices. The material to de-coil goes from the reel to a first diversion device, and then to a pulley. The rotation of the motor is controlled by this loop-control device. All the operating parameters of the de-coiler can be set on the control panel. The maximum speed is 90rpm and the capacity is 200kg. Also in production the de-coiler HSB 80 will provide a maximum capacity of 80kg. This new product widens the range of de-coilers with horizontal axis of rotation produced by the company. Bacchetti sas – Italy Fax : +39 04977 3997 Email : m.bacchetti@tin.it Website : www.bacchetti-amb.com Motor-driven de-coiler HSB 200

73

EuroWire – November 2007