HHD 2019 CATALOG

John Guest is a registered trademark of Reliance Worldwide Corporation.

Polyethylene

Tubing

Our John Guest Polyethylene Tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non-contaminating materials. Common applications are in water purification, water conditioners, ice makers, coffee brewers and vending machines. LLDPE is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water. John Guest Polyethylene Tubing is designed for use with John Guest Super Speedfit Push-in fittings, John Guest Shut-Off Valves and virtually all standard tubing connectors.

• MaximumWorking Temperature for John Guest Polyethylene Tubing is 150°F at pressures shown below. • Burst Pressures are approximately 3 times the maximum working pressure. • If the tube is used in a warm water system a tube insert may be necessary.

EXPOSURE TO ULTRAVIOLET LIGHT: John Guest Black LLDPE Tubing is UV stabilized and can be exposed to direct ultraviolet light (e.g. direct sunlight); other colors of John Guest LLDPE Tubing are not UV stabilized and cannot be exposed to direct ultraviolet light.

Our JG tubing is made from FDA approved materials and is listed with NSF Intl Standards 51 & 61. They have an ASTM rating of D-1693.

Note: We do not sell natural, milky or translucent tubing. These colors allow formation of algae on the inside of the tubing making the tubing look filthy. Polyethylene tubing is smooth, flexible, odorless and tasteless: ideal for cold water lines. Resists corrosion, oxidizing, dirt and acids. If using white tubing, Butch Winkler recommends Polypropylene! For more specifications please visit www.JohnGuest.com

1/4” OD

3/8” OD

Part No.

Color Length White 100 Ft Black 100 Ft Blue 100 Ft

Part No.

Color Length

PT6W PT6B PT6BL PT6RD

PT4B PT4BL PT4RD

Black 100 Ft Blue 100 Ft

Red 100 Ft PT4B500 Black 500 Ft PT4BL500 Blue 500 Ft PT4RD500 Red 500 Ft

Red 100 Ft PT6W500 White 500 Ft PT6B500 Black 500 Ft PT6BL500 Blue 500 Ft PT6RD500 Red 500 Ft

Working Temperatures & Pressures Tube OD Tube ID 1/4” .170” 230 PSI @ 70ºF 3/8” .25” 120 PSI @150ºF

Maximum pressure rating for a system depends on the lowest rated component, eg. most John Guest fittings have a different rating than the tube ratings shown above.

154

Phone: 800-443-4318 | www.HHDonline.com | info@HHDonline.com | Fax: 800-863-7041

Made with FlippingBook - Online Brochure Maker