Electricity + Control May 2015

DRIVES, MOTORS + SWITCHGEAR

ROUND UP

Sparkling project for local firm

speed drives (VSDs) and soft starters ranging between 30 kW and 220 kW. Incomers are rated at 1600A. Here also, the client chose Profinet as the communication protocol. JB Switchgear’s ‘Eagle’ series of assemblies carry type test certification for compliance with IEC 61439/SANS 1973-1 and IEC 61641 standards.The design is well proven, robust and user friendly, with more than thirty thousand tiers installed globally. JB Switchgear is also ISO 9001 – certified for their quality management system. Enquiries: Johan BassonTel. 011 027 5804 or email info@jbswitchgear.co.za

Leading panelbuilder JB Switchgear Solutions was recently awarded two multimillion Rand contracts by Petra Diamonds for the design, manufacture and supply of motor control centres (MCC’s) to their Cullinan and Finsch Mines respectively.The primary purpose of the C-Cut Phase 1 project is to extend the life of mines and to ramp up the rate of mining.The scope entails two areas. Firstly, the develop- ment of infrastructure to mine the new C-Cut Phase 1 block which consists of elevenmillion cubic metres of ore. Secondly, the deepen- ing of the two existing shafts.The Rock Shaft will be deepened by 354 metres, and the Men Material Shaft by 80 metres.The winders and headgear will be upgraded to handle the increase in tonnages. JB Switchgear scope include ten (10) ‘Eagle’ series motor control centres containing over two hundred DOL starters ranging between 10kW and 200kW. In addition, a number of variable speed drives (VSDs) between 18,5 kW and 160 kW were installed, as well as soft starters ranging between 160 kWand 200 kW. Incomers up to 2 500A were provided, and the communication protocol used is Profinet. At Finsch mine, the Run of Mine (ROM) production will be in- creased from approximately 2,9 Mt/a at present to 3,5 Mt/a while carat production will move up from 1,88 Million carats to around 2 Million carats. JB Switchgear’s scope in this instance include five (5) ‘Eagle’ series motor control centres which include over seventy DOL start- ers between 0,37 kW and 200 kW, as well as a variety of variable

Willie van Molendorff, Chris Benecke, Cobus Nel (Petra Diamonds) and Johan Basson (JB Switchgear).

Generating energy safely and efficiently?

Absolutely.

Photovoltaic power systems enable businesses to cut their energy bills by generating their own electricity with rooftop photovoltaic modules. The efficiency and quality of the system is determined by the efficiency and quality of each individual component. ABB has a comprehensive portfolio of high-performance products and systems for commercial and industrial solar applications. They meet all installation requirements, cover the entire process on both the direct and alternating current sides, and make solar power generation safe, efficient and cost effective. Everyday the world demands more renewable energy, ABB makes it possible. www.abb.co.za/lowvoltage

ABB South Africa (Pty) Ltd. Low Voltage Products and Systems.

Tel. +27 10 202 5880 E-mail: LP@za.abb.com

Rooftop PV 2015 A5 .indd 1

4/1/2015 3:29:34 PM