Aerial Pole Hardware (CA12003E)

Brackets

HANGER BRACKET (TAP)

Aluminum, for strand 6M and 6.6M. Used in CATV drop installations to secure a tap or other electronics to the messenger strand. The bracket can be bent at any point to achieve the desired horizontal location.

Bracket bent to desired horizontal location

AERIAL

Bracket as Shipped

INSTALLATION

Features

• Size range 3" to 9" (distance between strand and tap). • Bracket and clamping plates are made of aluminum alloy. • Bolt and nut are made of steel. • Designed for 1⁄4" (6.6M) and 5⁄16" (6M) messenger strand. • Square hole in bracket prevents bolt rotation when tightening. • Bend at top edge of bracket prevents rotation when bolts are tightened. • Interlocking clamping plates assure a positive and secure grip on the messenger strand. • Elongated slots provide variable positioning of tap or other electronics.

Ordering information : EM 0920

ALUMINUM EXTENSION BRACKET (TAP)

Aluminum, for strand 6M and 6.6M. Used in CATV drop installations to secure a tap to the messenger strand when it cannot be attached directly. The unit is offset below the strand, preventing cable abrasion on the equipment housing.

Features

• 2-1⁄2" size (distance between strand and tap). • Bracket and clamping plates are made of aluminum alloy. • Bolt and nut are made of steel. • Designed for 1⁄4" (6.6M) and 5⁄16" (6M) messenger strand. • Square hole in bracket prevents bolt rotation when tightening. • Tap mounting hole accepts up to a 5⁄16" bolt. • Bend at top edge of bracket prevents rotation when bolts are tightened. • Interlocking clamping plates assure a positive and secure grip on the messenger strand.

Ordering information: EM 0921

SERVICE DEADEND PLATE • Plate, Service Deadend, 1 1”

• Hot dip galvanized per ASTM A-153 • Hubbell Catalog number DC13E1

No. DC13E1

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page A66 | August 2022