Aerial Pole Hardware (CA12003E)

Clamps, Clips and Eyes

LASHING WIRE CLAMP

AERIAL INSTALLATION

The EMC lashing wire clamp is used for telco and CATV aerial plant to terminate and hold the end of the lashing wire, either at an interruption in continuity or at the end of the lashing wire coil. Also used to hang terminals and splice cases from strand. • Works with 1⁄4" (6.6M) to 7⁄16" (16M) messenger strand. • Mechanically galvanized for superior corrosion resistance. • Functional equivalent to the “D” lashing wire clamp.

Catalog Number

Description

EM 8009

LashingWire Clamp

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

WIRE ROPE CLIPS Body of each clip is galvanized ductile iron designed to fit the strand, which is protected by smooth-rounded contact surfaces. Bolts are made of high-strength steel.

Catalog Number

Strand Size Inches

Approx Ship Wt Each (lbs)

6480 6481 6482 6484 6485

1/4

0.13 0.14 0.23 0.50 1.11

5/16

3/8 1/2 5/8

No. 6485

(1) RUS listed

Used for attaching to thru-bolt or threaded end of straight or angle Thimbleye bolt for down guying. Rounded groove protects guy strand from sharp bending and kinking. Drop-forged galvanized steel. Construction for high-strength application. ANGLE THIMBLEYE® EYE

Dimensions Inches

Catalog Number

Approx Ship Wt Each (lbs)

For Bolt Diameter

Mtg. Bolt Hole A B C

D E

F

G R

0100 (1)

5/8 3/4

11/16 13/16

11/2 11/16 11/2 11/16

13/16 13/16

15/8 15/8

21/2 21/2 9/32 21/2 21/2 9/32

1.20 1.32

0101

Page A75 | August 2022