Custom Chrome Catalogue
ELECTRICAL
APPAREL
SEATS & BAGS
640644 ‘The Slugger’
FOOT CONTROLS
HAND CONTROLS
640643
LIGHTING
ELECTRICAL
47909
EXHAUST
47900
47901
High-Torque Starters by Terry Components When the decision has been made to build that high-compression or big-inch engine, besides considering a battery with higher cold cranking amps and upgraded battery cables, there’s another motor to be considered… namely the starter motor. Depending on the compression, cam and ignition timing, the stock 1.2KW (1.4hp) starter simply won’t cut it. Bigger motors need a high torque starter. Most motors under 96ci should start easily with a 1.4 KW (2.0 HP) starter motor. In the marketplace you can acquire 1.5 KW, 1.6 KW, 1.7 KW, 1.8 KW, 2.0 KW to turn over that big inch motor. Which one do you choose? Terry Components made it simple and a cost effective way to kick over that big inch motor with the right choice using a 1.8 KW ‘The Slugger’ starter. This starter puts out the same amount of torque as a 2.0 KW with less amperage drain. Sometimes you just need to slug it out. 1.8KW ‘The Slugger’ Starters • ‘Universal’ starters offer superior windings, high tolerance heavy-duty clutch, and thicker commentators that resist flying shorts • Static balanced for smoother operation • Low-profile design clears the electronic speedometer sender for easy installation • Puts out the same amount of torque as a 2.0KW with less amperage drain 640644 Polished/Chrome for Big Twins from 89-93 ���������������������$415.99 640645 Black wrinkle for Big Twins from 89-93 ���������������������������$395.99 640646 *Polished/Chrome for Big Twins from 94-06 (except 06 Dyna Glide models) �������������������������������������������������������������������������$415.99 *Black wrinkle for Big Twins from 94-06 (except 06 Dyna Glide models) �������������������������������������������������������������������������$395.99 *Note: Installation of these starters on Touring models will require the additional purchase of a CC #640643 Oil Pan Dipstick Adapter. Oil Pan Dipstick Adapter for Touring Models This adapter is required on Touring models from 93-06 when Terry Components starters are installed. 640643 For use with 1.8KW ‘starters �������������������������������������������������$54.99 Replacement Parts for Terry Starters 47900 Solenoid repair kit (also fits most Original Equipment and aftermarket Nippon Denso starters) �����������������������������������$30.99 Starter brush holder for 1.4KW starters �����������������������������$27.99 Starter brush holder for 1.6KW and 2.0KW starters �������$27.99 Starter clutch for 1.2KW, 1.4KW and 1.8KW starters ���$102.49 Starter clutch for 1.6KW and 2.0KW starters �����������������$122.99 640647 47901 47902 47909 47910
INTAKE
ENGINE
1.5 kw Starter for late Twin Cams by Terry Components Available in chrome or black finish Fits all 06-Up Dyna and 07-Up Softail and Touring models 640685
GASKETS
Chrome �����������������������������������������������������������������������������������������$409.99 Black ����������������������������������������������������������������������������������������������$397.99
640686
TRANSMISSION & CLUTCH
DRIVELINE
WHEELS TIRES & BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS & GAUGES
Fail-safe Pushbutton for Terry Components Starters Fail-Safe Switch. Use as a "backup" system or as a custom starter button. Mounts on the end of the solenoid and installs in minutes. For Terry Components 1.2 and 1.4 KW starters. 640687 Chrome Fail Safe Switch ��������������������������������������������������������������$79.99
GENERAL
CROSS REFERENCE
www.cus tomchrome.com
5.37
Made with FlippingBook HTML5