Custom Chrome Catalogue

DRIVELINE

Master Link Installation Tool Turns the chore of installing press-fit master link plates into an easy job. Works equally well on both standard and O-ring chains. 20274 Master Link Installation Tool ����$21.99

Motion Pro Chain Press Tool This tool will press on press fit side plates on all 520-530 size drive chain including O-ring types. 5008066 Complete tool ������������������������������$49.99 5008067 Press kit only ��������������������������������$13.99

Motion Pro Jumbo Chain Tool Kit • Ultra heavy duty tool for breaking and riveting roller chain • Fits all 520, 525, 530 and 630 standard or O-ring chains, plus industrial chains from #50-#80 • Pushes the pin completely through the chain link and rivets the same size chain with the included rivet adapter • Tool body may be mounted to a work bench for production work, held in a vise or by the handle • When bolted to a surface, an air or electric wrench may be used to break chain • Body bolt requires a 13⁄16" (21 mm) wrench and extractor pin uses a 9⁄16" (14 mm) wrench or socket 5008135 Chain tool ����������������������������������$131.99 5008935 Replacement pin ��������������������������$8.99

Diamond Chain Breaker Compression screw uses a heat-treated steel tip to press out chain pins. It’s recommended that pins be ground off flush to avoid damaging the chain bushing. 33037 Replaces OEM 94480-89T ����������$85.99

Motion Pro Masterlink Pliers • Simplifies installation and removal of clip- type masterlinks • One tip is shorter and notched to be placed on the pin while the other is longer to easily push the clip 5008230 Master Link Pliers ������������������������$20.99

12310

Motion Pro Quad Stake Chain Rivet Kit Use in conjunction with the Motion Pro Jumbo Chain Tool. This rivet kit will quad stake chain, so it looks like a factory job. 5008142 Complete kit ��������������������������������$21.99

11

Chrome ‘Full Dress’ Chain Guards

Chrome reproductions of classic ‘Dresser’ rear chain guards for 4-speed FL models from 63-84. Bolts directly onto 4-speed, chain drive models (except Softail models) 71-85. Accurate to the original with heavy-gauge construction, fully rolled edges, inspection cover relief and front mount bushing. 12310 Standard chain guard (repl. OEM 60302-63T) ������������������������������������$55.99 25548 Rubber grommet with a steel insert for use in mounting Fat Bob tanks.

Motion Pro Chain Breaker Tool A tough tool designed for shop use, also makes a perfect tool kit item. Properly used, the tool will break hundreds of chain links without failure. Pushes chain link pin completely through link. Handle folds to fit small tool pouch. Replaceable pin is heat treated and hardened for long life. For shop use, tool may be used with an air or electric impact wrench. 5008001 Fits all 420 to 630 chains ����������$24.99 5008002 Replacement pin ��������������������������$3.99

Motion Pro Mini Chain Press Tool Tool box size and budget priced tool for the installation of press-fit side plates. Very easy to use, and easily fits into tool kit. Hex key wrench is included. 5008070 Fits all 520 to 530 chains ����������$10.99

Helps to isolate the tanks from vibration. Pack of 10 (repl. OEM 11411) ����������������������������������������������$0.65

*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity.

11.44

Please see Cautionary Information in back of catalog.